; ==============================================
; AcerFrame Pentium Pro System 	       
; 1. Configuration file version V1.00  06/03/96
; English version
; ==============================================
BOARD
  ID="ACR1D21"
  NAME="M9B Dual Pentium Proes System"
  MFR="ACER"
  CATEGORY="SYS"
  SLOT=EMB(0)
  AMPERAGE=15000
  READID=yes
  COMMENTS="M9B Dual Pentium Proes system configuration file V1.00"
  HELP="Some of the key features of the EISA system board are as follows:\n\n
	* Pentium Pro Dual CPUs\n\n
	* 256K or 512K bytes L2 cache\n\n
	* 5 PCI bus slots\n\n
	* 3 32-bits EISA slots\n\n
	* Up to 512M bytes memory on board\n\n
	* 256K bytes ROM BIOS/128K RAM BIOS\n\n
	* 2 Serial, 1 Parallel, 1 FDC, 1 IDE HDD interface on board.\n\n
	* 1 ATI VGA on board.\n\n	 
	* 1 SCSI Controller on board.\n\n	 
	* PS/2-compatible keyboard and mouse on board"

SYSTEM
  NONVOLATILE = 8192			;8K bytes
  AMPERAGE = 20000
  PCI_PORT = 7000H - 0FFFFH
  SLOT(1) = EISA(1)   LENGTH = 341
      SKIRT = NO
      LABEL = "EISA 1"
  SLOT(2) = EISA(2)   LENGTH = 341
      SKIRT = NO
      LABEL = "EISA 2"
  SLOT(3) = EISA(3)   LENGTH = 341
      SKIRT = NO
      LABEL = "EISA 3"
  SLOT(4) = PCI( 0, 13 )
      LABEL = "PCI  1"
  SLOT(5) = PCI( 0, 14 )
      LABEL = "PCI  2"
  SLOT(6) = PCI( 1, 4 )
      LABEL = "PCI  3"
  SLOT(7) = PCI( 1, 5 )
      LABEL = "PCI  4"
  SLOT(8) = PCI( 1, 6 )
      LABEL = "PCI  5"


JUMPER(1) = 2
  NAME="OSC Jumpers"
  JTYPE=INLINE
  REVERSE=YES
  VERTICAL=YES
  LABEL=LOC(1^2 2^3) "60MHZ" "66MHZ"
  FACTORY=LOC(1^2 2^3) 01 
  COMMENTS="This is for selecting OSC frequency.
	\nThe JP16 is in CPU board.
	\n\t JP5     CLK(MHZ)
	\n\t ---     --------
	\n\t 1-2        60
	\n\t 2-3        66
	\n"

JUMPER(2) = 4
  NAME="Bus to Core ratio"
  JTYPE=PAIRED
  REVERSE=NO
  VERTICAL=NO
  LABEL=LOC(1 2 3 4) "1-5" "2-6" "3-7" "4-8"
  FACTORY=LOC(1 2 3 4) 1101
  COMMENTS="This is for selecting 2.0x, 2.5x, 3.0x, 3.5x, 4.0x and 5.0x 
	\nBus/Core ratio. The CN1 is in CPU board.
	\n\t 1-5   2-6   3-7   4-8	  o: open
	\n\t ---   ---   ---   ---	  c: close
	\n\t  c     c     c     c    2.0x
	\n\t  c     c     o     c    3.0x
	\n\t  c     c     c     o    4.0x
	\n\t  c     c     o     o    5.0x
	\n\t  o     c     c     c    2.5x
	\n\t  o     c     c     c    3.5x
	\n"

SOFTWARE(1)="Setup Screen RAM BIOS setting:"

; MEMTYPE change from SYS to OTH to avoid NT hange up. Jeff 12/12/91

FUNCTION = "System BIOS type"

  CHOICE = "RAM BIOS Enable(128K)"
    LINK
     MEMORY=128K
     ADDRESS=0E0000H
     MEMTYPE=OTH
     WRITABLE=NO
     SIZE=DWORD
     DECODE=32
     CACHE=YES
     INIT=SOFTWARE(1) "\tRAM BIOS Enable"

  CHOICE = "RAM BIOS Enable(64K)"
    LINK
     MEMORY=64K
     ADDRESS=0F0000H
     MEMTYPE=OTH
     WRITABLE=NO
     SIZE=DWORD
     DECODE=32
     CACHE=YES
     INIT=SOFTWARE(1) "\tRAM BIOS Enable"

FUNCTION = "System Processor"
  TYPE = "CPU,Pentium Pro"
    CHOICE = "Pentium Pro at 180MHz"
      SUBTYPE = "Pentium Pro;SPE=60"
    CHOICE = "Pentium Pro at 200MHz"
      SUBTYPE = "Pentium Pro;SPE=66"

FUNCTION="Special System Ports"

  CHOICE="Special System Ports"
    LINK
	PORT=0800H-08FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0C00H
	SHARE=NO
	SIZE=BYTE

	PORT=0C02H-0C07H
	SHARE=NO
	SIZE=BYTE

	PORT=0CF8H-0CFFH
	SHARE=NO
	SIZE=BYTE

FUNCTION="EISA Reserved Devices"

  CHOICE="EISA Reserved Devices"
    LINK
	PORT=0H-0FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0400H-04FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0C80H-0C84H
	SHARE=NO
	SIZE=BYTE

GROUP = "System Memory Functions"
  FUNCTION = "Base System Memory"
    TYPE = "MEM"
    CHOICE = "Enabled"
      COMBINE
	MEMORY=512K-640K STEP=1K 
	ADDRESS=0
	WRITABLE=YES
	MEMTYPE=SYS
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES

  FUNCTION = "8   -  16MB System Memory"
    TYPE = "MEM"
      CHOICE = "8MB System Memory"
        COMBINE
          MEMORY=7M
	  ADDRESS=1M
	  MEMTYPE=SYS
	  WRITABLE=YES
	  SIZE=DWORD
	  DECODE=32
	  CACHE=YES
	  SHARE=NO
      CHOICE = "16MB System Memory with 15-16MB System use"
        COMBINE
          MEMORY=15M
	  ADDRESS=1M
	  MEMTYPE=SYS
	  WRITABLE=YES
	  SIZE=DWORD
	  DECODE=32
	  CACHE=YES
	  SHARE=NO
      CHOICE = "16MB System Memory with 15-16MB Add-on card use"
        COMBINE
          MEMORY=14M
	  ADDRESS=1M
	  MEMTYPE=SYS
	  WRITABLE=YES
	  SIZE=DWORD
	  DECODE=32
	  CACHE=YES
	  SHARE=NO
      CHOICE = "Disabled"
        DISABLE = YES
  FUNCTION = "16  -  64MB System Memory"
    TYPE = "MEM"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 16 - 64MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M  - 48M STEP=8M
	ADDRESS=16M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES

  FUNCTION = "64  - 128MB System Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 64 - 128MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M - 64M STEP=8M
	ADDRESS=64M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES
  FUNCTION = "128 - 192MB System Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 128 - 192MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M - 64M STEP=8M
	ADDRESS=128M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES
  FUNCTION = "192 - 256MB System Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 192 - 256MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M - 64M STEP=8M
	ADDRESS=192M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES
  FUNCTION = "256 - 320MB System Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 256 - 320MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M - 64M STEP=8M
	ADDRESS=256M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES
  FUNCTION = "320 - 384MB System Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 320 - 384MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M - 64M STEP=8M
	ADDRESS=320M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES
  FUNCTION = "384 - 448MB System Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 384 - 448MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M - 64M STEP=8M
	ADDRESS=384M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES
  FUNCTION = "448 - 512MB System Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
    	  Memory size setting should be equal to the size installed in
	  the memory block 448 - 512MB."
    CHOICE = "Enabled"
    COMBINE
      MEMORY=0M - 64M STEP=8M
	ADDRESS=448M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "Disabled"
      DISABLE = YES
ENDGROUP

FUNCTION = "Mouse port"
  TYPE	   = "PTR,8042"
  COMMENTS = "The mouse port is a PS/2 compatible port."
  CONNECTION = "Standard PS/2 style DIN connector"

  CHOICE   = "Enabled"
	DISABLE = NO
	FREE
	IRQ = 12
	    SHARE   = NO
	    TRIGGER = EDGE
  CHOICE = "Disabled"
      	DISABLE = YES

FUNCTION = "Keyboard port"
	TYPE = "KEY,8042"
	COMMENTS = "PS/2 compatible keyboard"
	CONNECTION = "Standard PS/2 style DIN connector"
	HELP	= "The installed keyboard must be set to send 'PS/2' or
	'AT' style key codes."

	CHOICE = "Enabled"
		DISABLE = NO
		FREE
		IRQ = 1
		   SHARE = NO
		   TRIGGER = EDGE

FUNCTION = "Floppy Disk Controller"
  TYPE = "MSD,FPYCTL,FIFO"
  COMMENTS = "This controller is a superset of the typical ISA floppy disk
	      controller.  It can support a maximum of two floppy drives. Any
	      combination of 5 1/4 inch or 3 1/2 inch drives may be used."

  CHOICE = "Enabled"
      FREE
	IRQ = 6
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03f0h - 03f5h
	  SIZE = BYTE
	PORT = 03f6h - 03f7h
	  SIZE = BYTE
	  SHARE="ATdIsk"

	DMA = 2
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "IDE HDD Interface"
  TYPE = "MSD,IDE"
  COMMENTS = "The IDE interface is software compatible with a standard AT
	      hard disk controller."

  CHOICE = "Enabled"
      FREE
      IRQ = 14
	SHARE = NO
	TRIGGER = EDGE
      PORT = 01f0h - 01f7h
	SIZE = BYTE
      PORT = 03f6h - 03f7h
	  SIZE = BYTE
	  SHARE="ATdIsk"

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "Parallel port"
  TYPE = "PAR"
  COMMENTS = "The parallel port has a standard 25 pin connector (AT style)
	and is a superset of a typical ISA parallel port."
  HELP = "The settings in BIOS SETUP must match your choice."

  CHOICE = "Enabled as LPT1 (3BCh)"
      SUBTYPE = "LPT1"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 03bch - 03bfh
	  SIZE = BYTE

  CHOICE = "Enabled as LPT2 (378h)"
      SUBTYPE = "LPT2"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 0378h - 037fh
	  SIZE = BYTE

  CHOICE = "Enabled as LPT3 (278h)"
      SUBTYPE = "LPT3"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 0278h - 027fh
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "Serial Ports"
  TYPE = "COM,ASY"
  COMMENTS = "Setting up serial ports."
  HELP = "The settings in BIOS SETUP must match your choice."

  SUBFUNCTION = "Select COM1 Port Address"
     CHOICE = "3F8h"
	SUBTYPE = "COM1"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03F8h - 03FFh
	  SIZE = BYTE
     CHOICE = "3E8h"
	SUBTYPE = "COM1"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03E8h - 03EFh
	  SIZE = BYTE
     CHOICE = "Disabled"
        DISABLE = YES
  SUBFUNCTION = "Select COM2 Port Address"
     CHOICE = "2F8h"
	SUBTYPE = "COM2"
	FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02F8h - 02FFh
	  SIZE = BYTE
     CHOICE = "2E8h"
	SUBTYPE = "COM1"
	FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02E8h - 02EFh
	  SIZE = BYTE
     CHOICE = "Disabled"
        DISABLE = YES

;GROUP = "PCI Bus IRQ Resources"
;  FUNCTION = "Slot1, Slot2"
;     SUBFUNCTION = "INTA#, INTD#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 3 | 4  | 5 | 7 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;  FUNCTION = " Slot1, Slot2"
;     SUBFUNCTION = "INTB#, INTA#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 3 | 4  | 5 | 7 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;  FUNCTION = "Slot1, Slot2, On-Board VGA"
;     SUBFUNCTION = "INTC#, INTB#,   INTA#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 3 | 4  | 5 | 7 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;  FUNCTION = "Slot1, Slot2, On-Board SCSI"
;     SUBFUNCTION = "INTD#, INTC#,   INTA#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 3 | 4  | 5 | 7 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;
;  FUNCTION = "Slot3, Slot4, Slot5"
;     SUBFUNCTION = "INTA#, INTD#, INTC#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 4 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;  FUNCTION = "Slot3, Slot4, Slot5"
;     SUBFUNCTION = "INTB#, INTA#, INTD#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 4 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;  FUNCTION = "Slot3, Slot4, Slot5"
;     SUBFUNCTION = "INTC#, INTB#, INTA#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 4 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;  FUNCTION = "Slot3, Slot4, Slot5"
;     SUBFUNCTION = "INTD#, INTC#, INTB#"
;        CHOICE = "Enabled"
;	   COMBINE
;           IRQ = 4 | 9 | 10 | 11 | 12 | 14 | 15
;	      SHARE = YES
;	      TRIGGER = LEVEL
;        CHOICE = "Disabled"
;           DISABLE = YES
;
;ENDGROUP