BOARD
   ID = "ADP1000"
   NAME = "Adaptec AHA-1510S ISA TO SCSI Host Adapter"
   MFR = "Adaptec, Inc."
   CATEGORY = "MSD"
   LENGTH = 170
   COMMENTS = "AHA-1510S EISA Configuration File Version 1.03 (SNI)\n\n"
                
   HELP = "Select the desired AHA-1510S interupt channel and I/O port.
	   Use the configuration utility \"View Switches and Jumpers\"
           option to verify that the AHA-1510S jumpers have been 
	   set correctly for this configuration.  The default 
	   configuration is identical with the factory jumper settings."

JUMPER(8) = 5
     NAME = "J8"
     JTYPE = PAIRED
     VERTICAL = NO
     REVERSE = YES
     LABEL = LOC(1-5)  "I12" 
   		       "I11"
   		       "I10"
   		       "I9"
                       "PR1"

     FACTORY = LOC(1-5) 01000

JUMPER(4) = 1
     NAME = "J4"
     JTYPE = PAIRED
     VERTICAL = NO
     REVERSE = YES
     LABEL = LOC(1)  " " 

     FACTORY = LOC(1) 0
	
GROUP = "Host Adapter System Resources"
	TYPE = "MSD"

FUNCTION = "Interrupt channel selection"
	HELP = "IRQ12, IRQ11, IRQ 10, IRQ09 are four interrupt request selection 
                is available to the 
                user on the board. Pick the one which does not cause conflict in the
		in the system. Use the configuration utility \"View Jumpers 
		and Switches\" option to determine the correct jumper
		settings."

           CHOICE = "Interrupt Request 11"
                 LINK
                 IRQ  = 11
		 INIT = JUMPER(8) LOC(1 2 3 4) 0100

           CHOICE = "Interrupt Request 12"
                 LINK
                 IRQ  = 12
		 INIT = JUMPER(8) LOC(1 2 3 4) 1000


           CHOICE = "Interrupt Request 10"
                 LINK
                 IRQ  = 10
		 INIT = JUMPER(8) LOC(1 2 3 4) 0010

           CHOICE = "Interrupt Request 09"
                 LINK
                 IRQ  = 09
		 INIT = JUMPER(8) LOC(1 2 3 4) 0001


FUNCTION = "Primary/Secondary Port Address Selection"

	HELP = "Select which I/O port is to be used by the host
	        adapter hardware.  The host adapter supports primary at address
                340H and secondary at 140H. 
		Use the 
		configuration utility \"View Jumpers and Switches\" option
		to determine the correct jumper settings."

           CHOICE = "Primary port address at 340H"
		DISABLE = YES
		LINK
		PORT = 340h-35Fh
		INIT = JUMPER(8) LOC(5) 0

           CHOICE = "Secondary port address at 140H"
		DISABLE = NO
		LINK
		PORT = 140h-15Fh
		INIT = JUMPER(8) LOC(5) 1

FUNCTION = "Active Termination Selection"

	HELP = "Select Active Termination. 
		Use the configuration utility \"View Jumpers and Switches\"
                option to determine the correct jumper settings."

           CHOICE = "Active Termination"
		DISABLE = NO
		LINK
		INIT = JUMPER(4) LOC(1) 0

           CHOICE = "No Active Termination"
		DISABLE = YES
		LINK
		INIT = JUMPER(4) LOC(1) 1



ENDGROUP