;AST SixPak 286 Configuration File
;!AST8300.CFG
;Version 1.00   18-Apr-90

BOARD
  ID = "AST8300"
  NAME = "AST SixPak 286 Memory Board"
  MFR = "AST"
  CATEGORY = "MFC"
  SLOT = ISA16

JUMPER(1) = 6
  JTYPE = TRIPOLE
  NAME = "E1-E6"
  REVERSE = YES
  LABEL = LOC(1-6) "E1" "E2" "E3" "E4" "E5" "E6"
  HELP = "Set jumpers E1-E6 on the SixPak 286 board to match\n
	  the amount of memory.  If you have 512 KB or 1 MB\n
	  on your SixPak 286 board, put all six jumpers on pins 1\n
	  and 2.  If you have 2 or 4 MB, put all six jumpers on\n
	  pins 2 and 3."

JUMPER(2) = 1
  JTYPE = PAIRED
  NAME = "E7"
  LABEL = LOC(1) "E7"
  HELP = "Enables parity error checking.  For normal\n
	     operation, leave this jumper installed.  Removing
	     the jumper may cause data loss."

JUMPER(3) = 4
  JTYPE = PAIRED
  NAME = "E9-E12"
  REVERSE = YES
  LABEL = LOC(1-4) "E9" "E10" "E11" "E12"
  HELP = "Put the jumper on E9 for the first SixPak 286 board;\n
	  on E10 for the second SixPak 286 board;\n
	  on E11 for the third SixPak 286 board;\n
	  or on E12 for the Fourth SixPak board."

SWITCH(1) = 5
  STYPE = DIP
  NAME = "I/O Pak 286 - SW1"
  HELP = "Sets the I/O Pak 286 port configuration\n
	    (if the board is installed).  See the\n
	    I/O Pak/286 User's Manual for further\n
	    instructions."

SOFTWARE(1) = "
To use expanded memory, install the expanded memory
manager software.  See the SixPak 286 User's Manual for further instructions."

INCLUDE = "AST8300.OVL"