; file !BUS4781.STD	{d}
; This file is used for standard installations.
; To be copied to !BUS4781.CFG for use
;	Version 2.0b	2/5/92   DTW New adapter

BOARD
	ID = "BUS4781"
	NAME = "Storage Dimensions SDC3222F 32 Bit EISA FAST SCSI Host Adapter"
	MFR = "Storage Dimensions, Inc."
	CATEGORY = "MSD"
	SLOT = EISA
	LENGTH = 204			;milli-meter
	SKIRT = NO
	READID = YES			;readable product ID
	IOCHECK = VALID
	DISABLE = SUPPORTED
	COMMENTS = "
This board provides a bus master interface between the EISA bus 
and up to seven SCSI peripherals.  As an intelligent board it 
offloads the system processor of SCSI protocol responsibilities 
and also coordinates multiple system I/O requests using an 
industry standard host based mailbox structure."
	HELP = "
This board supports full automatic configuration."

IOPORT(1) = 0zC8Bh
	INITVAL = LOC(7-0)	00x1xxxx
IOPORT(2) = 0zC8Ch
	INITVAL = LOC(7-0)	xxxxxxxx
IOPORT(3) = 0zC8Dh
	INITVAL = LOC(7-0)	xxxxxx00
IOPORT(4) = 0zC84h
	INITVAL = LOC(7-0)	xxxxxxxx


GROUP = "SCSI Host Adapter"

	FUNCTION = "I/O Port Address"

		CHOICE = "330h"
			LINK
			PORT = 0330h-0333h
			INIT = IOPORT(2)	LOC(2-0)	000

		CHOICE = "230h"
			LINK
			PORT = 0230h-0233h
			INIT = IOPORT(2)	LOC(2-0)	010

		CHOICE = "130h"
			LINK
			PORT = 0130h-0133h
			INIT = IOPORT(2)	LOC(2-0)	100

		CHOICE = "334h "
			LINK
			PORT = 0334h-0337h
			INIT = IOPORT(2)	LOC(2-0)	001

		CHOICE = "234h"
			LINK
			PORT = 0234h-0237h
			INIT = IOPORT(2)	LOC(2-0)	011

		CHOICE = "134h"
			LINK
			PORT = 0134h-0137h
			INIT = IOPORT(2)	LOC(2-0)	101


	FUNCTION = "Interrupt Channel"

		CHOICE = "IRQ-11"
			LINK
			INIT = IOPORT(3)	LOC(6)		0
			INIT = IOPORT(2)	LOC(7-5)	010
			IRQ = 11
				SHARE = NO
				TRIGGER = EDGE

		CHOICE = "IRQ-10"
			LINK
			INIT = IOPORT(3)	LOC(6)		0
			INIT = IOPORT(2)	LOC(7-5)	001
			IRQ = 10
				SHARE = NO
				TRIGGER = EDGE

		CHOICE = "IRQ-15"
			LINK
			INIT = IOPORT(3)	LOC(6)		0
			INIT = IOPORT(2)	LOC(7-5)	101
			IRQ = 15
				SHARE = NO
				TRIGGER = EDGE

		CHOICE = "IRQ-14"
			LINK
			INIT = IOPORT(3)	LOC(6)		0
			INIT = IOPORT(2)	LOC(7-5)	100
			IRQ = 14
				SHARE = NO
				TRIGGER = EDGE

		CHOICE = "IRQ-9"
			LINK
			INIT = IOPORT(3)	LOC(6)		0
			INIT = IOPORT(2)	LOC(7-5)	000
			IRQ = 9
				SHARE = NO
				TRIGGER = EDGE

		CHOICE = "IRQ-12"
			LINK
			INIT = IOPORT(3)	LOC(6)		0
			INIT = IOPORT(2)	LOC(7-5)	011
			IRQ = 12
				SHARE = NO
				TRIGGER = EDGE

	FUNCTION = "BIOS Address"
		TYPE = "ROM"

		CHOICE = "0DC000h"
			LINK
			MEMORY = 16K
				ADDRESS = 0DC000h
				WRITABLE = NO
				MEMTYPE = OTH
				SIZE = BYTE
			INIT = IOPORT(2)	LOC(4 3)	00
			INIT = IOPORT(3)	LOC(7)		0

		CHOICE = "Disabled"
			LINK
			INIT = IOPORT(2)	LOC(4 3)	11
			INIT = IOPORT(3)	LOC(7)		1

		CHOICE = "0D8000h"
			LINK
			MEMORY = 16K
				ADDRESS = 0D8000h
				WRITABLE = NO
				MEMTYPE = OTH
				SIZE = BYTE
			INIT = IOPORT(2)	LOC(4 3)	01
			INIT = IOPORT(3)	LOC(7)		0

		CHOICE = "0CC000h"
			LINK
			MEMORY = 16K
				ADDRESS = 0CC000h
				WRITABLE = NO
				MEMTYPE = OTH
				SIZE = BYTE
			INIT = IOPORT(2)	LOC(4 3)	10
			INIT = IOPORT(3)	LOC(7)		0

		CHOICE = "0C8000h"
			LINK
			MEMORY = 16K
				ADDRESS = 0C8000h
				WRITABLE = NO
				MEMTYPE = OTH
				SIZE = BYTE
			INIT = IOPORT(2)	LOC(4 3)	11
			INIT = IOPORT(3)	LOC(7)		0


	FUNCTION = "Host Adapter SCSI ID"

		CHOICE = "Device ID 7"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	111

		CHOICE = "Device ID 6"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	110

		CHOICE = "Device ID 5"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	101

		CHOICE = "Device ID 4"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	100

		CHOICE = "Device ID 3"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	011

		CHOICE = "Device ID 2"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	010

		CHOICE = "Device ID 1"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	001

		CHOICE = "Device ID 0"
			LINK
			INIT = IOPORT(1)	LOC(2-0)	000


	FUNCTION = "SCSI Parity Checking"

		CHOICE = "On"
			LINK
			INIT = IOPORT(1)	LOC(3)		1

		CHOICE = "Off"
			LINK
			INIT = IOPORT(1)	LOC(3)		0


	FUNCTION = "EISA Bus Burst Cycles"
		TYPE = "MSD"

		CHOICE = "Enable"
			LINK
			INIT = IOPORT(3)	LOC(5)		1

		CHOICE = "Disable"
			LINK
			INIT = IOPORT(3)	LOC(5)		0


	FUNCTION = "Synchronous negotiation"

		CHOICE = "Enabled"
			LINK
			INIT = IOPORT(1)	LOC(5)		1

		CHOICE = "Disabled"
			LINK
			INIT = IOPORT(1)	LOC(5)		0


	FUNCTION = "Maximum Sync Data Rate Allowed"

		CHOICE = "10 MBytes/sec - FAST SCSI"
			FREE
			INIT = IOPORT(3)	LOC(2)		1

		CHOICE = "5 MBytes/sec"
			FREE
			INIT = IOPORT(3)	LOC(2)		0


ENDGROUP

GROUP = "Floppy Subsystem"

	FUNCTION = "Floppy Controller Address"

		CHOICE = "Disable"
			LINK
			INIT = IOPORT(3)	LOC(3)		1
			INIT = IOPORT(4)	LOC(7-0)	00000001

		CHOICE = "Primary"
			LINK
			DMA = 2
			IRQ = 6
			PORT = 03F0h-03F7h
			INIT = IOPORT(3)	LOC(4)		0
			INIT = IOPORT(3)	LOC(3)		0
			INIT = IOPORT(4)	LOC(7-0)	00000001

		CHOICE = "Secondary"
			LINK
			DMA = 2
			IRQ = 6
			PORT = 0370h-0377h
			INIT = IOPORT(3)	LOC(4)		1
			INIT = IOPORT(3)	LOC(3)		0
			INIT = IOPORT(4)	LOC(7-0)	00000001

ENDGROUP