BOARD ID="CPQ1201" NAME="Compaq DESKPRO 486/25" MFR="Compaq" CATEGORY="SYS" SLOT=EMB(0) READID=YES SIZING=0 VERSION=1.2AH REV=0 SYSTEM NONVOLATILE=4096 AMPERAGE=20000 SLOT(1)=EISA(1) SLOT(2)=EISA(2) SLOT(3)=EISA(3) SLOT(4)=EISA(4) SLOT(5)=EISA(5) SLOT(6)=EISA(6) SLOT(7)=EISA(7) BUSMASTER=NO SLOT(8)=OTHER(8),"MEM_1" LABEL="Mem" MEMORY=640K ADDRESS=0K CACHE=YES STEP=128K MEMORY=256K ADDRESS=640K CACHE=NO MEMORY=1023M ADDRESS=896K CACHE=YES STEP=128K JUMPER(1)=2 NAME="Power-On Password" JTYPE=INLINE VERTICAL=YES LABEL=LOC(1^2 2^3)"Disable""Enable" FACTORY=LOC(2^3)1 INITVAL=LOC(2^3)1 COMMENTS="System board jumper E2\n This jumper allows the user to enable or disable the power-on password capability. If the jumper is set to disabled when the unit is powered-on, any existing password will be cleared." JUMPER(2)=2 NAME="Config Maintenance" JTYPE=INLINE VERTICAL=YES LABEL=LOC(1^2 2^3)"Maint Mode""Normal" FACTORY=LOC(2^3)1 INITVAL=LOC(2^3)1 COMMENTS="System board jumper E1\n This jumper allows the user to clear extended nonvolatile RAM of any existing configuration information. The jumper must be set to maintenance mode with the power off, and the unit then powered-on in order for this jumper to take effect." JUMPER(3)=2 NAME="Integrated Video" JTYPE=INLINE VERTICAL=YES LABEL=LOC(1^2 2^3)"Disable""Auto" FACTORY=LOC(2^3)1 INITVAL=LOC(2^3)1 COMMENTS="System board jumper E3\n This jumper allows the user to disable the integrated VGC capability. Since the System ROM can automatically adjust for additional video adapters, it should not be necessary to use this jumper." INCLUDE="CPQSYS01.OVL" BEGINOVL ;os INCLUDE="CPQOS.CMN" ;sid FUNCTION="" SHOW=NO CHOICE="" ;proc IOPORT(105)=0zC67h INITVAL=rrrrrrxx FUNCTION="System Processor" TYPE ="CPU,80486;SPE=25" CHOICE= "80486 at 25MHz" FREE INIT=IOPORT(105)LOC(1 0)10 IRQ=13 SHARE="SYSIRQA" GROUP="Numeric Coprocessors" TYPE="NPX" FUNCTION="387" CHOICE="" FUNCTION="Weitek 4167" CHOICE="" FUNCTION="Weitek 4167" SHOW=NO CHOICE="" CHOICE="" FREE MEMORY=64M ADDRESS=0C0000000h WRITABLE=NO MEMTYPE=VIR SHARE="WEITEK" MEMORY=64M ADDRESS=0C4000000h WRITABLE=NO MEMTYPE=VIR SHARE="WEITEK" ENDGROUP ;floppy GROUP="Integrated Diskette Controller" INCLUDE="CPQFPY.CMN" FUNCTION="" SHOW=NO CHOICE="" ENDGROUP ;fdisk GROUP="Integrated Fixed Disk Controller" INCLUDE="CPQDKIF.CMN" FUNCTION="Drive Type - Unit 1" COMMENTS="\nCAUTION: The attached disk drive type was automatically determined. This selection may be changed, but selecting the wrong drive type will cause improper operation of the fixed disk.\n\n" TYPE="MSD,UNIT0,DSKDRV" INCLUDE="CPQDKTYP.CMN" FUNCTION="Drive Type - Unit 2" COMMENTS="\nCAUTION: The attached disk drive type was automatically determined. This selection may be changed, but selecting the wrong drive type will cause improper operation of the fixed disk.\n\n" TYPE="MSD,UNIT1,DSKDRV" INCLUDE="CPQDKTYP.CMN" INCLUDE="CPQSOFT.CMN" ENDGROUP ;memory FUNCTION="System Rom" SHOW=NO CHOICE="" FREE MEMORY=128K ADDRESS=896K CACHE=YES MEMTYPE=OTH WRITABLE=NO GROUP="Compaq Memory" TYPE="MEM;Compaq" FUNCTION="Base Memory" RESOURCE="CPQLIN",UNIQUE CHOICE="640 Kbytes, Compaq compatible" TOTALMEM=1M-100M STEP=128K FREE MEMORY=640K ADDRESS=0K CACHE=YES MEMORY=256K ADDRESS=16000K CACHE=YES MEMTYPE=OTH MEMORY=128K ADDRESS=16256K CACHE=YES MEMTYPE=OTH WRITABLE=NO MEMORY=0M-14976K STEP=128K ADDRESS=1M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=16M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=80M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=144M CACHE=YES MEMORY=0M-48M STEP=128K ADDRESS=208M CACHE=YES CHOICE="512 Kbytes" TOTALMEM=1M-100M STEP=128K HELP="The Configuration Utility may run out of memory when reconfiguring the system if the base memory is set to 512K, especially in complicated configurations. If it does, you will be notified of what actions to take." FREE MEMORY=512K ADDRESS=0K CACHE=YES MEMORY=384K ADDRESS=15872K CACHE=YES MEMTYPE=OTH MEMORY=128K ADDRESS=16256K CACHE=YES MEMTYPE=OTH WRITABLE=NO MEMORY=0M-14848K STEP=128K ADDRESS=1M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=16M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=80M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=144M CACHE=YES MEMORY=0M-48M STEP=128K ADDRESS=208M CACHE=YES CHOICE="640 Kbytes, Linear" HELP="This choice contiguously maps memory so that Compaq Built-In Memory is not available at FA0000, but is instead added into extended memory. The previously reserved memory area at FE0000 is now available for use by additional memory. If your applications do not support this memory configuration, reconfigure your system as 640K Compaq Compatible. If your computer has older system roms that do not have support for the linear memory configuration, you will not be able to choose this selection." TOTALMEM=1M-100M STEP=128K FREE MEMORY=640K ADDRESS=0K CACHE=YES MEMORY=0K ADDRESS=0K MEMORY=128K ADDRESS=4194176K CACHE=YES MEMTYPE=OTH WRITABLE=NO MEMORY=0M-15M STEP=128K ADDRESS=1M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=16M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=80M CACHE=YES MEMORY=0M-64M STEP=128K ADDRESS=144M CACHE=YES MEMORY=0M-48M STEP=128K ADDRESS=208M CACHE=YES FREE MEMBER="CPQLIN","Y" SHARE=NO FUNCTION="Total Memory" CHOICE="" ENDGROUP ;security INCLUDE="CPQSEC1.CMN" FUNCTION="" SHOW=NO CHOICE="" FUNCTION="" SHOW=NO CHOICE="" ;integrated i/f GROUP="Integrated Interfaces" INCLUDE="CPQSER1T.CMN" INCLUDE="CPQPAR1T.CMN" INCLUDE="CPQPNTR.CMN" ENDGROUP ;integrated vga INCLUDE="CPQIVGA.CMN" ;adv features INCLUDE="CPQFEAT1.CMN" ENDOVL ;disable port C67h function IOPORT(110)=0C94h INITVAL=000000xx IOPORT(111)=0C9Ah INITVAL=rrrxrrrr FUNCTION="" SHOW=NO CHOICE="" FREE INIT=IOPORT(110)LOC(1 0)11 INIT=IOPORT(111)LOC(4)0 FUNCTION="Processor Control" SHOW=NO CHOICE="" FREE MEMORY=1K ADDRESS=80C00000h MEMTYPE=VIR SIZE=DWORD CACHE=NO FREE IRQ=13 SHARE="SYSIRQA" FUNCTION="" TYPE="ISA" SHOW=NO CHOICE="" SUBTYPE="MAP" FREEFORM=30,61h,62h,63h,64h,65h,66h,47h,88h,0E0h,0E0h,0E0h,0E0h,0E0h, 0E0h,0E0h,1,2,3,4,5,6,0,0,0,0,0,0,0,0,0