BOARD
ID="CPQ1501"
NAME="Compaq SYSTEMPRO/XL Server"
MFR="Compaq"
CATEGORY="SYS"
SLOT=EMB(0)
READID=YES
SIZING=0
VERSION=1.2AH
REV=0

SYSTEM
NONVOLATILE=8192
AMPERAGE=37000
SLOT(1)=EISA(1)
SLOT(2)=EISA(2)
SLOT(3)=EISA(3)
SLOT(4)=EISA(4)
SLOT(5)=EISA(5)
SLOT(6)=EISA(6)
SLOT(7)=EISA(7)
SLOT(8)=EISA(8)
SLOT(9)=OTHER(11),"P1"             LABEL="Proc"
SLOT(10)=OTHER(15),"P2"            LABEL="Proc"
SLOT(11)=OTHER(9),"MEM_1"          LABEL="Mem"

MEMORY=640K  ADDRESS=0K   CACHE=YES STEP=128K
MEMORY=256K  ADDRESS=640K CACHE=NO
MEMORY=1023M ADDRESS=896K CACHE=YES STEP=128K

JUMPER(1)=2
NAME="Diskette Boot"
JTYPE=INLINE
VERTICAL=NO
LABEL=LOC(1^2 2^3)"Enable""Disable"
FACTORY=LOC(2^3)1
INITVAL=LOC(2^3)1
COMMENTS="System board jumper E20\n
This jumper allows the user to override the diskette
boot control selection as set by the System Configuration
Utility.  When this jumper is enabled, the system may be
booted with a diskette, regardless of the configuration
selection.  When disabled, the System Configuration Utility selection
will indicate the diskette boot state."

JUMPER(2)=2
NAME="Integrated Video"
JTYPE=INLINE
VERTICAL=NO
LABEL=LOC(1^2 2^3)"Disable""Auto"
FACTORY=LOC(2^3)1
INITVAL=LOC(2^3)1
COMMENTS="System board jumper E16\n
This jumper allows the user to disable the integrated
VGC capability. Since the System ROM can automatically
adjust for additional video adapters, it should not be
necessary to use this jumper."

JUMPER(3)=2
NAME="Config Maintenance"
JTYPE=INLINE
VERTICAL=NO
LABEL=LOC(1^2 2^3)"Maint Mode""Normal"
FACTORY=LOC(2^3)1
INITVAL=LOC(2^3)1
COMMENTS="System board jumper E17\n
This jumper allows the user to clear extended
nonvolatile RAM of any existing configuration information.
The jumper must be set to maintenance mode with the
power off, and the unit then powered-on in order
for this jumper to take effect."

JUMPER(4)=2
NAME="Power-On Password"
JTYPE=INLINE
VERTICAL=NO
LABEL=LOC(1^2 2^3)"Disable""Enable"
FACTORY=LOC(2^3)1
INITVAL=LOC(2^3)1
COMMENTS="System board jumper E18\n
This jumper allows the user to enable or disable
the power-on password capability.  If the jumper is
set to disabled when the unit is powered-on, any
existing password will be cleared."


INCLUDE="CPQSYS02.OVL"
BEGINOVL

;os
INCLUDE="CPQOS3.CMN"

;sid
FUNCTION="System Identification Number"
CHOICE="None"
CHOICE=""

;floppy
GROUP="Integrated Diskette Controller"
INCLUDE="CPQFPY.CMN"
INCLUDE="CPQFPSWP.CMN"
ENDGROUP

;fdisk

;memory
FUNCTION="System ROM" SHOW=NO
RESOURCE="CPQSCSIROM",UNIQUE
CHOICE=""
FREE MEMBER="CPQSCSIROM","Y" SHARE=NO
FREE MEMORY=128K ADDRESS=896K   CACHE=YES MEMTYPE=OTH WRITABLE=NO
GROUP="Compaq Memory"
TYPE="MEM;Compaq"
FUNCTION="Base Memory"
RESOURCE="MEMORY",UNIQUE
CHOICE="640 Kbytes, Linear"
HELP="This choice contiguously maps memory so that Compaq Built-In Memory is
not available at FA0000, but is instead added into extended memory.  The
previously reserved memory area at FE0000 is now available for use by
additional memory.  If your applications do not support this memory
configuration, reconfigure your system as 640K Compaq Compatible."
FREE MEMBER="MEMORY","LINEAR" SHARE=NO
MEMORY=640K             ADDRESS=0K       CACHE=WRITEBACK
MEMORY=128K             ADDRESS=4194176K CACHE=YES MEMTYPE=OTH WRITABLE=NO
MEMORY=256K             ADDRESS=1M       CACHE=WRITEBACK
CHOICE="640 Kbytes, Compaq compatible"
FREE MEMBER="MEMORY","COMPAT" SHARE=NO
MEMORY=640K                ADDRESS=0K     CACHE=WRITEBACK
MEMORY=256K                ADDRESS=16000K CACHE=WRITEBACK MEMTYPE=OTH
MEMORY=128K                ADDRESS=16256K CACHE=YES MEMTYPE=OTH WRITABLE=NO
CHOICE="512 Kbytes, Compaq compatible"
HELP="The Configuration Utility may run out of memory when
reconfiguring the system if the base memory is set to 512K,
especially in complicated configurations.  If it does, you will be
notified of what actions to take."
FREE MEMBER="MEMORY","COMPAT" SHARE=NO
MEMORY=512K                ADDRESS=0K     CACHE=WRITEBACK
MEMORY=384K                ADDRESS=15872K CACHE=WRITEBACK MEMTYPE=OTH
MEMORY=128K                ADDRESS=16256K CACHE=YES MEMTYPE=OTH WRITABLE=NO
FUNCTION="Extended Memory"
CHOICE="Extended Memory Installed"
TOTALMEM=0M-511M STEP=128K
HELP="This function will map memory in the super extended memory
range above 16 megabytes."
SUBCHOICE
FREE
MEMBER="MEMORY","COMPAT"
SHARE=NO
MEMORY=0M-15104K STEP=128K ADDRESS=1280K    CACHE=WRITEBACK
MEMORY=0M-64M    STEP=128K ADDRESS=16M      CACHE=WRITEBACK
MEMORY=0M-64M    STEP=128K ADDRESS=80M      CACHE=WRITEBACK
MEMORY=0M-64M    STEP=128K ADDRESS=144M     CACHE=WRITEBACK
MEMORY=0M-64M    STEP=128K ADDRESS=208M     CACHE=WRITEBACK
MEMORY=0M-64M    STEP=128K ADDRESS=272M     CACHE=WRITEBACK
MEMORY=0M-64M    STEP=128K ADDRESS=336M     CACHE=WRITEBACK
MEMORY=0M-64M    STEP=128K ADDRESS=400M     CACHE=WRITEBACK
MEMORY=0M-48M    STEP=128K ADDRESS=464M     CACHE=WRITEBACK
SUBCHOICE
FREE
MEMBER="MEMORY","LINEAR"
SHARE=NO
MEMORY=0M-15M STEP=128K ADDRESS=1M          CACHE=WRITEBACK
MEMORY=0M-64M STEP=128K ADDRESS=16M         CACHE=WRITEBACK
MEMORY=0M-64M STEP=128K ADDRESS=80M         CACHE=WRITEBACK
MEMORY=0M-64M STEP=128K ADDRESS=144M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=128K ADDRESS=208M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=128K ADDRESS=272M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=128K ADDRESS=336M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=128K ADDRESS=400M        CACHE=WRITEBACK
MEMORY=0M-48M STEP=128K ADDRESS=464M        CACHE=WRITEBACK
FUNCTION="Total Memory"
CHOICE=""
ENDGROUP

;security
INCLUDE="CPQSEC5.CMN"

GROUP="Power-on Features"
FUNCTION="Diskette boot control"
HELP="This feature enables and disables system start-up
from the diskette drive.  Disabling diskette boot
prevents the drive from being used to start the computer.
The diskette drive, however, remains active for all
other transactions such as reading or writing to a diskette."
CHOICE="Enable Floppy Boot"
CHOICE="Disable Floppy Boot"
FUNCTION="Diskette write control"
HELP="This feature enables and disables writing to
the diskette drive.  Setting this feature to 'read
only' will not allow writes to the diskette drive.
Setting this feature to 'read and write' will allow
normal operation of the diskette drive."
CHOICE="Read and write"
FREE
INIT=PORTADR(00C94h) 00000011
INIT=PORTADR(00C98h) rrrr1rrr
CHOICE="Read only"
FREE
INIT=PORTADR(00C94h) 00000011
INIT=PORTADR(00C98h) rrrr0rrr
FUNCTION="ROM POST Speed Up"
HELP="This feature enables and disables the system start-up memory
count.  When enabled, the Power On Self Test procedure (POST) will skip
the memory test."
CHOICE="Enabled"
SUBTYPE="CMOS=2D1010"
CHOICE="Disabled"
SUBTYPE="CMOS=2D1000"
ENDGROUP

;integrated i/f
GROUP="Integrated Interfaces"
INCLUDE="CPQSER2M.CMN"
INCLUDE="CPQPAR1M.CMN"
INCLUDE="CPQPNTR.CMN"

ENDGROUP

;integrated vga
INCLUDE="CPQVGAI3.CMN"

;rev display info
INCLUDE="CPQDSP2.CMN"

;adv features
INCLUDE="CPQFEAT6.CMN"

;revision info
INCLUDE="CPQREV.CMN"


ENDOVL

FUNCTION=""
SHOW=NO
CHOICE=""
LINK
INIT=PORTADR(00C6Dh)BYTE rrr101rr
INIT=PORTADR(0FC83h)BYTE 00000000

FUNCTION="Processor Control" SHOW=NO CHOICE=""
FREE
MEMORY=1K ADDRESS=80C00000h MEMTYPE=VIR SIZE=DWORD CACHE=NO
FREE
IRQ=13 SHARE="SYSIRQA"

FUNCTION="" TYPE="MPM" SHOW=NO CHOICE=""
FREEFORM=01,02

FUNCTION="" TYPE="ISA" SHOW=NO CHOICE=""
SUBTYPE="MAP"
FREEFORM=30,61h,62h,63h,64h,65h,66h,67h,68h,8Bh,0E0h,89h,40h,0E0h,
0E0h,8Ah,1,2,3,4,5,6,7,8,0,0,0,0,0,0,0