BOARD
ID="CPQ1601"
NAME="Compaq ProLiant 7000"
MFR="Compaq"
CATEGORY="SYS"
SLOT=EMB(0)
READID=YES
SIZING=0M
VERSION=1.2AH
REV=0

SYSTEM
NONVOLATILE=32768
AMPERAGE=20000
SLOT(1) = ISA16(1)             LABEL="Slot 1"
SLOT(2) = OTHER(2)             LABEL="Slot 2"
SLOT(3) = PCI(0,1)             LABEL="Slot 3"
SLOT(4) = PCI(0,2)             LABEL="Slot 4"
SLOT(5) = PCI(4,1)             LABEL="Slot 5"
SLOT(6) = PCI(4,2)             LABEL="Slot 6"
SLOT(7) = PCI(8,1)             LABEL="Slot 7"
SLOT(8) = PCI(8,2)             LABEL="Slot 8"
SLOT(9) = PCI(8,3)             LABEL="Slot 9"
SLOT(10)= PCI(8,4)             LABEL="Slot 10"
SLOT(11)= PCI(8,5)             LABEL="Slot 11"
SLOT(12)= OTHER(12),"CPU"      LABEL="Proc"

;System Cache Map
MEMORY=640K  ADDRESS=0K    CACHE=YES STEP=1024K
MEMORY=256K  ADDRESS=640K  CACHE=NO
MEMORY=128K  ADDRESS=896K  CACHE=YES STEP=1024K
MEMORY=1023M ADDRESS=1024K CACHE=YES STEP=1024K
MEMORY=1024M ADDRESS=1024M CACHE=YES STEP=1024K
MEMORY=2048M ADDRESS=2048M CACHE=YES STEP=1024K

IGNORE=PCI(0,15) ;PIIX4
IGNORE=PCI(0,12) ;ASM

SWITCH(1)=6
NAME="SWITCH"
STYPE=DIP
REVERSE=YES
VERTICAL=NO
FACTORY=LOC(1-6)001000 
INITVAL=LOC(1-6)001000
COMMENTS="Switch Positions:
\n1 -  OFF=Enable Embedded Video,
\n     ON =Disable Embedded Video.
\n2 -  OFF=Unlock System Configuration,
\n     ON =Lock System Configuration.
\n3 -  ON
\n4 -  OFF=Floppy boot control, dependent on configuration selection,
\n     ON =Floppy boot enabled (configuration selection override).
\n5 -  OFF=User Power-on password override disabled,
\n     ON =User Power-on password override enabled.
\n6 -  OFF=Retain System configuration,
\n     ON =Erase System configuration on boot."


INCLUDE="CPQSYS07.OVL"
BEGINOVL

;os
INCLUDE="CPQOS3.CMN"


;sid
FUNCTION="System Identification Number"
CHOICE="None"
CHOICE=""

;serviceNum
FUNCTION="Service Number"
CHOICE=""

;floppy
GROUP="Integrated Diskette Controller"
INCLUDE="CPQFPY.CMN"
INCLUDE="CPQFPSP2.CMN"
ENDGROUP

;IDE-CDROM
GROUP="Embedded IDE Controller"

FUNCTION="Standard Interface"
  RESOURCE="CNTRORD", UNIQUE
  RESOURCE="BOOTCD", UNIQUE
  TYPE="MSD,DSKCTL"
  HELP="The Embedded IDE Controller can be enabled as
  the Secondary Controller or Disabled." 
 CHOICE="Disabled"
  SUBTYPE="DIS1;CMOS=260404+291000"
  DISABLE=YES
  LINK
  MEMBER="CNTRORD", "2"
 CHOICE="Enabled as Second Controller"
  SUBTYPE="CTL2;CMOS=260400+291010"
  LINK
  MEMBER="CNTRORD", "2"
  MEMBER="BOOTCD", "YES"
  PORT=01F0h-01F7h
  PORT=03F6h
  SHARE="MSD"
  PORT=11F1h
  IRQ=14

FUNCTION="Drive Type - Unit 1"
 TYPE="MSD,UNIT0,DSKDRV"
 INCLUDE="CPQDKTYP.CMN"
FUNCTION="Drive Type - Unit 2"
 TYPE="MSD,UNIT1,DSKDRV"
 INCLUDE="CPQDKTYP.CMN"

ENDGROUP

;memory
INCLUDE="CPQMEM.CMN"

;security
INCLUDE="CPQSEC4.CMN"

GROUP="Power-on Features"
 FUNCTION="Diskette boot control"
  HELP="This feature enables and disables system start-up
  from the diskette drive.  Disabling diskette boot
  prevents the drive from being used to start the computer.
  The diskette drive, however, remains active for all
  other transactions such as reading or writing to a diskette."
  CHOICE="Enable Floppy Boot"
  CHOICE="Disable Floppy Boot"
 FUNCTION="Diskette write control"
  HELP="This feature enables and disables writing to
  the diskette drive.  Setting this feature to 'read
  only' will not allow writes to the diskette drive.
  Setting this feature to 'read and write' will allow
  normal operation of the diskette drive."
  CHOICE="Read and write"
   FREE
   INIT=PORTADR(00C94h) 00000011
   INIT=PORTADR(00C98h) rrrr1rrr
  CHOICE="Read only"
   FREE
   INIT=PORTADR(00C94h) 00000011
   INIT=PORTADR(00C98h) rrrr0rrr
 FUNCTION="ROM POST Speed Up"
  HELP="This feature enables and disables the system start-up memory
  count.  When enabled, the Power On Self Test procedure (POST) will skip
  the memory test."
 CHOICE="Enabled"
  SUBTYPE="CMOS=2D1010"
 CHOICE="Disabled"
  SUBTYPE="CMOS=2D1000"
ENDGROUP

;integrated i/f
GROUP="Integrated Interfaces"
;INCLUDE="CPQSER2M.CMN"
;INCLUDE="CPQPAR1M.CMN"
INCLUDE="CPQSER2J.CMN"
INCLUDE="CPQPAR1J.CMN"
INCLUDE="CPQPNTR.CMN"
ENDGROUP

;CSM
INCLUDE="CPQCSM3.CMN"

INCLUDE="CPQDSP2N.CMN"

;adv features
INCLUDE="CPQFEATK.CMN"

ENDOVL

IOPORT(110)=0C94h  INITVAL=000000xx
IOPORT(111)=0C9Ah  INITVAL=rrrxrrrr
IOPORT(112)=0C6Dh INITVAL=rrrxxxrr
FUNCTION="" SHOW=NO CHOICE=""
LINK
INIT=IOPORT(110)LOC(1 0)11
INIT=IOPORT(111)LOC(4)0
INIT=IOPORT(112)LOC(4-2)101

;FUNCTION="EISA Reserved" SHOW=NO CHOICE=""
;LINK
;PORT=7C80h-7C83h
;PORT=8C80h-8C83h
;PORT=9C80h-9C83h
;PORT=0AC80h-0AC83h
;PORT=0BC80h-0BC83h
;PORT=0CC80h-0CC83h
;PORT=0DC80h-0DC83h
;PORT=0EC80h-0EC83h
;PORT=0FC80h-0FC83h

FUNCTION="Processor Control" SHOW=NO CHOICE=""
FREE
IRQ=13 SHARE="SYSIRQA"

GROUP="System Information"
TYPE="ISA" 
FUNCTION="Slot Mapping Information" SHOW=NO CHOICE="Slot Mapping Tables"
SUBTYPE="MAP"
FREEFORM=30,21h,82h,83h,84h,85h,86h,87h,88h,89h,8Ah,8Bh,8Ch,0E0h,
0E0h,0E0h,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

FUNCTION="PCI Slot Mapping Information" SHOW=NO CHOICE="PCI Slot Mapping Tables"
SUBTYPE="PCIMAP"
FREEFORM=27,03h,00h,08h,04h,00h,10h,05h,04h,08h,06h,04h,010h,07h,08h,08h,
08h,08h,10h,09h,08h,18h,0Ah,08h,20h,0Bh,08h,28h
ENDGROUP