;
;     Compaq Hardware Management Enhancement Board
;	       CFG configuration file
;

BOARD
    ID = "CPQ7001"
    NAME = "Compaq 32-Bit Server Manager/R Board"
    MFR = "Compaq"
    CATEGORY = "OTH"
    SLOT = EISA
    LENGTH = 341
    READID = YES
    AMPERAGE = 2157
    BUSMASTER = 173
    IOCHECK = INVALID
    DISABLE = UNSUPPORTED
    ;!#1 REV = 0
     COMMENTS = "This is the Compaq 32-Bit Server Manager/R Board"
     HELP = "The board's options are set using the System Configuration Utility"


IOPORT(1) = 0ZC8Eh
IOPORT(2) = 0ZCC0h  INITVAL = xxxxrrrr


INCLUDE = "CPQ7000.OVL"

BEGINOVL
GROUP =  "Server Identification"
    FUNCTION = "Server Name"
	HELP = "The server name must be specified. It
will be used by the Management PC to identify this specific server."
	CHOICE = ""
    FUNCTION = "Server ID"
	HELP = "The server ID must be specified. It
will be used to identify this specific server during voice and pager alerts."
	CHOICE = ""
    FUNCTION = "Server Password"
	HELP = "The server password must be specified. This password
will provide security when accessing this server from the Management PC."
	CHOICE = ""
    FUNCTION = "Tone Password"
	HELP = "All 4 digits of the tone password must be specified.
The tone password is the 4 digit code entered from a touch tone telephone
when receiving a voice alert."
	CHOICE = ""
ENDGROUP

GROUP = "Internal Modem Settings"
    FUNCTION = "Status"
	CHOICE = ""
    FUNCTION = "Baud Rate"
	CHOICE = ""
    FUNCTION = "Parity"
	SHOW = EXP
	CHOICE = "None"
	CHOICE = "Odd"
	CHOICE = "Even"
    FUNCTION = "Stop Bits"
	SHOW = EXP
	CHOICE = "1"
	CHOICE = "2"
    FUNCTION = "Dial String"
	HELP ="Hayes-compatible dial strings are supported. Refer to
32-Bit Server Manager/R Board or modem documentation for appropriate settings."
	CHOICE = ""
    FUNCTION = "Answer String"
	HELP ="Hayes-compatible dial strings are supported. Refer to
32-Bit Server Manager/R Board or modem documentation for appropriate settings."
	CHOICE = ""
    FUNCTION = "Hangup String"
	SHOW = EXP
	HELP ="Hayes-compatible dial strings are supported. Refer to
32-Bit Server Manager/R Board or modem documentation for appropriate settings."
	CHOICE = ""
    FUNCTION = "Restore Internal Modem Settings"
	HELP = "Selecting this entry will restore all choices under internal
modem settings to their original default settings."
	CHOICE = "Select to Restore Default Settings"
ENDGROUP

GROUP = "Serial Port Settings"
    FUNCTION = "Serial Port Mode"
	HELP = "This selection indicates how you will be using the 32-Bit Server
Manager Board's serial port. I.E. \"Direct Connect\" means that this machine will be
connected directly to your management PC, \"External Modem\" means that this
machine will communicate with the management PC via a modem connected to the
board's serial port."
	CHOICE = "Disabled"
	CHOICE = "Direct Connect"
	CHOICE = "External Modem"
    FUNCTION = "Baud Rate"
	CHOICE = "300"
	CHOICE = "1200"
	CHOICE = "2400"
	CHOICE = "9600"
	CHOICE = "14400"
	CHOICE = "19200"
    FUNCTION = "Parity"
	SHOW = EXP
	CHOICE = "None"
	CHOICE = "Odd"
	CHOICE = "Even"
    FUNCTION = "Stop Bits"
	SHOW = EXP
	CHOICE = "1"
	CHOICE = "2"
    FUNCTION = "Dial String"
	HELP ="Hayes-compatible dial strings are supported. Refer to
32-Bit Server Manager/R Board or modem documentation for appropriate settings."
	CHOICE = ""
    FUNCTION = "Answer String"
	HELP ="Hayes-compatible dial strings are supported. Refer to
32-Bit Server Manager/R Board or modem documentation for appropriate settings."
	CHOICE = ""
    FUNCTION = "Hangup String"
	SHOW = EXP
	HELP ="Hayes-compatible dial strings are supported. Refer to
32-Bit Server Manager/R Board or modem documentation for appropriate settings."
	CHOICE = ""
    FUNCTION = "Restore Serial Port Settings"
	HELP = "Selecting this entry will restore all choices under serial port
settings to their original default settings."
	CHOICE = "Select to Restore Default Settings"
ENDGROUP

GROUP = "Pager Settings"
    FUNCTION = "Baud Rate"
	CHOICE = "300"
	CHOICE = "1200"
	CHOICE = "2400"
	CHOICE = "9600"
	CHOICE = "14400"
	CHOICE = "19200"
    FUNCTION = "Parity"
	SHOW = EXP
	CHOICE = "None"
	CHOICE = "Odd"
	CHOICE = "Even"
    FUNCTION = "Byte Size"
	SHOW = EXP
	CHOICE = "7 bits"
	CHOICE = "8 bits"
    FUNCTION = "Stop Bits"
	SHOW = EXP
	CHOICE = "1"
	CHOICE = "2"
    FUNCTION = "Restore Pager Settings"
	HELP = "Selecting this entry will restore all choices under pager
settings to their original default settings."
	CHOICE = "Select to Restore Default Settings"
ENDGROUP


FUNCTION = "Alert Destinations"
HELP = "This selection shows the alert destinations that have been defined
for this 32-Bit Server Manager/R Board. Alert destinations tell the board how to
contact the appropriate individuals when an alert condition occurs."
	CHOICE = ""

FUNCTION = "Call Back Security"
SHOW = EXP
HELP = "This selection enables/disables the call back security feature of the
32-Bit Server Manager/R Board."
	CHOICE = ""

FUNCTION = "POST Time Out"
SHOW = EXP
HELP = "This is the time that the Server Manager/R Board will wait for the Power
On Self Test to complete.  If POST is not completed by this time, an alert
will be issued. The range is 1-60 minutes with the default being 15 minutes."
       CHOICE =""

FUNCTION = "Server Manager/R Board Reset"
SHOW = EXP
Help = "This selection will re-initialize the Server Manager/R Board."
       CHOICE = "Select to reset board"

FUNCTION = "Remote Console Audible Indicator"
HELP = "This selection enables/disables the remote console audible indicator.
 (I.E. the tone heard at this machine when there is a remote session from
a SMF)."
       CHOICE = "Enabled"
       CHOICE = "Disabled"

Group = "Innate Object Monitoring"
FUNCTION = "Memory Errors"
SHOW = EXP
SUBFUNCTION = "Lack of Refresh"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Memory Parity"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "Serial Port (1)"
TYPE = "INNATE"
SHOW = EXP
SUBFUNCTION = "Overrun Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Parity Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Framing Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Carrier Detect"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "Serial Port (2)"
TYPE = "INNATE"
SHOW = EXP
SUBFUNCTION = "Overrun Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Parity Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Framing Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Carrier Detect"
   CHOICE = "Enabled"
   CHOICE = "Disabled"


FUNCTION = "Parallel Port (1)"
TYPE = "INNATE"
SHOW = EXP
SUBFUNCTION = "Printer Error"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Out of Paper"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "Parallel Port (2)"
TYPE = "INNATE"
SHOW = EXP
SUBFUNCTION = "Printer Error"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Out of Paper"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "EISA Bus"
SHOW = EXP
SUBFUNCTION = "IO Check Cnt"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "Power"
SHOW = EXP
SUBFUNCTION = "Volts +5 (mV)"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Volts -5 (mV)"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Volts +12 (mV)"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Volts -12 (mV)"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "Temperature"
SHOW = EXP
SUBFUNCTION = "Temp (øC)"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Temp Chg (øC\m)"
    CHOICE = "Enabled"
    CHOICE = "Disabled"

FUNCTION = "Keyboard"
SHOW = EXP
SUBFUNCTION = "Kbd Scan Codes"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Scan Codes Count"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "System ROM"
SHOW = EXP
SUBFUNCTION = "ROM Version"
    CHOICE = "Enabled"
    CHOICE = "Disabled"
SUBFUNCTION = "POST Failure"
    CHOICE = "Enabled"
    CHOICE = "Disabled"
SUBFUNCTION = "POST Errors"
    CHOICE = "Enabled"
    CHOICE = "Disabled"
SUBFUNCTION = "Diag Codes"
    CHOICE = "Enabled"
    CHOICE = "Disabled"


FUNCTION = "Primary Standard Fixed Disk Interface"
TYPE = "INNATE"
SHOW = EXP
SUBFUNCTION = "IO Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "ECC'd Error"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Trk 0 not Found"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "Secondary Standard Fixed Disk Interface"
TYPE = "INNATE"
SHOW = EXP
SUBFUNCTION = "IO Errors"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "ECC'd Error"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Trk 0 not Found"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

FUNCTION = "Health Log"
TYPE = "INNATE"
SHOW = EXP
SUBFUNCTION = "Crit. Err Count"
   CHOICE = "Enabled"
   CHOICE = "Disabled"
SUBFUNCTION = "Corr. Err Count"
   CHOICE = "Enabled"
   CHOICE = "Disabled"

ENDGROUP

FUNCTION = "Server Manager/R Interrupt"
    HELP = "Select the Edit resources command to modify your
32-Bit Server Manager/R Board host interrupt selection."
    CHOICE = "Enabled"
	SUBCHOICE
	    LINK
		IRQ =  11 | 5 | 10 | 12 | 15 | 9
		TRIGGER = LEVEL
		INIT = IOPORT(2) LOC (7-4) 1000|0010|0110|1010|1100|0100
	    FREE
		INIT = IOPORT(1) LOC (7-0) 00000000
	SUBCHOICE
	    LINK
		IRQ =  11 | 5 | 10 | 12 | 15 | 9
		INIT = IOPORT(2) LOC (7-4) 1001|0011|0111|1011|1101|0101
	    FREE
		INIT = IOPORT(1) LOC (7-0) 00000000

ENDOVL