;
; Compaq Internal V.90 Netelligent ISA Fax Modem 294900-002
;
BOARD
  ID = "CPQF9F2"
  NAME = "Compaq Internal V.90 Netelligent ISA Fax Modem"
  MFR = "Compaq"
  CATEGORY = "COM"
  SLOT = ISA16
  LENGTH = 157
  VERSION = 1.00
  AMPERAGE = 240
  REV = 0
  COMMENTS="
\n   The Compaq Netelligent 56K Fax Modem supprts:
\n     * Data
\n       -Download connection speeds from 300 to 56000 (53300)
\n       -Upload connection speeds from 300 to 33600
\n       -V.90, V.34bis, V.42bis, MNP 2-5
\n     * Fax
\n       -Fax Speeds from 2400 - 144000
\n       -Class 1, Group 3 fax support
\n     * Synchronous Acces Mode (V.80)
\n     * Industry standard Hayes AT command set
\n     * Local and remote digital and analog loopback diagnostics
\n     * Automatic power-on self test
\n     * Parallel 16C550A UART support
\n     * NVRAM directory and stored profiles
\n     * Supports both PnP and Legacy mode"


JUMPER(1) = 13
  NAME = "Modem Port and IRQ"
  JTYPE = PAIRED
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-13) 0000000000000
  LABEL = LOC(1-13) "4" "3" "2" "1" "3" "4" "5" "7" "9" "10" "11" "12" "15"
  COMMENTS = "
\n   The above diagram shows the jumper strappings required to use the
\n   currently selected COM port and IRQ for Legacy mode operation. In
\n   PnP mode no jumpers need to be strapped as port and IRQ will be 
\n   set via the OS or the MODEMSET program."


JUMPER(2) = 5
  NAME = "Modem PnP"
  JTYPE = PAIRED
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-5) 00111
  LABEL = LOC(1-5) "L" "L" "P" "P" "P" 
  COMMENTS = "
\n   The above diagram shows the jumper strappings required to 
\n   select PnP vs. Legacy mode."
  
FUNCTION = "Internal Modem Configuration"
  TYPE = "COM,ASY,MDM"
  COMMENTS = "
\n   Legacy: COM port and IRQ are set by jumper strappings
\n   PnP:    COM port and IRQ are set by OS and/or software"
 
  HELP = "
\n   Even though in Plug and Play mode port and IRQ are set
\n   by software or OS they still need to be selected in the 
\n   ECU to reserve those resources.
\n
\n                                  Recommended IRQ
\n
\n           COM port    Address          IRQ
\n           --------   ---------         ---
\n              1       3F8h-3FFh          4
\n              2       2F8h-2FFh          3
\n              3       3E8h-3EFh          4
\n              4       2E8h-2EFh          3"

  CHOICE = "Legacy"
     LINK
      PORT = 2F8h-2FFh | 3F8h-3FFh | 3E8h-3EFh | 2E8h-2EFh
      INIT = JUMPER(1) LOC(1-4) 0010 | 0001 | 0100 | 1000             
      INIT = JUMPER(2) LOC(1-5) 11000 | 11000 | 11000 | 11000
     LINK
      IRQ = 3 | 4 | 5 | 7 | 9 | 10 | 11 | 12 | 15
      INIT = JUMPER(1) LOC(5-13) 100000000 | 010000000 | 001000000 | 000100000 | 000010000 | 000001000 | 000000100 | 000000010 | 000000001

  CHOICE = "PnP"
    LINK
      PORT = 2F8h-2FFh | 3F8h-3FFh | 3E8h-3EFh | 2E8h-2EFh
      INIT = JUMPER(1) LOC(1-4) 0000 | 0000 | 0000 | 0000             
      INIT = JUMPER(2) LOC(1-5) 00111 | 00111 | 00111 | 00111
    LINK
      IRQ = 3 | 4 | 5 | 7 | 9 | 10 | 11 | 12 | 15
      INIT = JUMPER(1) LOC(5-13) 000000000 | 000000000 | 000000000 | 000000000 | 000000000 | 000000000 | 000000000 | 000000000 | 000000000