;
; Compaq Sandy 288 Data+Fax Modem
;
BOARD
  ID = "CPQFB11"
  NAME = "Compaq internes 28.8/33.6 Daten- und Faxmodem"
  MFR = "Compaq"
  CATEGORY = "COM"
  SLOT = ISA8
  LENGTH = 127
  VERSION = 1.27
  REV = 0


JUMPER(1)=3
  NAME="COM-Einstellungen des Modems"
  JTYPE=PAIRED
  VERTICAL=NO
  REVERSE=YES
  FACTORY=LOC(1-3) 011
  LABEL=LOC(1-3) "0" "1" "SEL"
  COMMENTS="
\n   Oben sehen Sie die Jumper-Einstellungen zur Verwendung des
\n   gegenw„rtig gew„hlten COM-Ports.
\n
\n   M”gliche Einstellungen:      Empfohlene IRQ:
\n
\n   COM-Port   0    1    SEL           IRQ
\n   --------   ---  ---  ---           ---
\n      1       ON   ON   ON             4
\n      2       OFF  ON   ON             3
\n      3       ON   OFF  ON             4
\n      4       OFF  OFF  ON             3"

JUMPER(2)=5
  NAME="IRQ-Einstellungen des Modems"
  JTYPE=PAIRED
  VERTICAL=NO
  REVERSE=YES
  FACTORY=LOC(1-5) 01000
  LABEL=LOC(1-5) "2" "3" "4" "5" "7"

FUNCTION = "Interne Modemschnittstelle"
  TYPE = "COM,ASY,MDM"

  CHOICE = "COM1"
    SUBTYPE = "COM1"
    LINK
      PORT = 3F8h-3FFh
      INIT = JUMPER(1) LOC(1-3) 111

  CHOICE = "COM2"
    SUBTYPE = "COM2"
    LINK
      PORT = 2F8h-2FFh
      INIT = JUMPER(1) LOC(1-3) 011

  CHOICE = "COM3"
    SUBTYPE = "COM3"
    LINK
      PORT = 3E8h-3EFh
      INIT = JUMPER(1) LOC(1-3) 101

  CHOICE = "COM4"
    SUBTYPE = "COM4"
    LINK
      PORT = 2E8h-2EFh
      INIT = JUMPER(1) LOC(1-3) 001


FUNCTION = "Interrupt-Einstellung"
  CHOICE = "IRQ2"
    SUBTYPE = "IRQ2"
    LINK
      IRQ = 2
      INIT = JUMPER(2) LOC(1-5) 10000

  CHOICE = "IRQ3"
    SUBTYPE = "IRQ3"
    LINK
      IRQ = 3
      INIT = JUMPER(2) LOC(1-5) 01000

  CHOICE = "IRQ4"
    SUBTYPE = "IRQ4"
    LINK
      IRQ = 4
      INIT = JUMPER(2) LOC(1-5) 00100

  CHOICE = "IRQ5"
    SUBTYPE = "IRQ5"
    LINK
      IRQ = 5
      INIT = JUMPER(2) LOC(1-5) 00010

  CHOICE = "IRQ7"
    SUBTYPE = "IRQ7"
    LINK
      IRQ = 7
      INIT = JUMPER(2) LOC(1-5) 00001