;
; Compex ENET100-VG4/EISA 10/100 Mbit Selectable EISA LAN Adapter
; Configuration file version 1.23
; !CPX0301.CFG  20/03/1995
;
; Copyright (C) by PDS, 1993-1995
; All Rights Reserved.
;

BOARD
   ID = "CPX0301"
   NAME     = "Compex ENET100-VG4/EISA Selectable EISA LAN Adapter"
   MFR      = "Compex Inc."
   CATEGORY = "NET"
   SLOT = EISA
   LENGTH = 220
   READID = YES
   BUSMASTER = 600
   AMPERAGE = 90
   IOCHECK = INVALID
   DISABLE = UNSUPPORTED
   COMMENTS = "The Compex ENET100-VG4/EISA Selectable EISA LAN Adapter
               is a 32-bit Type 10BaseT/100VG compatible local area
               networking adapter.\n\n
               Your adapter configuration parameters of I/O Address Range,
               Interrupt, Memory Map Location and Boot ROM Location may be
               chosen using this EISA configuration utility to match the
               requirements of your computer. Your adapter also must be set to
               match the values selected.  Use the program VGCONFIG.EXE to set
               your adapter configuration parameters.  
               VGCONFIG.EXE is on the ENET100-VG4 network adapter disk"

;
; I/O ports initialization Information Block
;
IOPORT(1) = 0ZC38h      ; Base I/O ports address
        SIZE = BYTE
IOPORT(2) = 0ZC3Ah      ; Page Register
        SIZE = BYTE
IOPORT(3) = 0ZC45h      ; IRQ Selection Register
        SIZE = BYTE
IOPORT(4) = 0ZC40h      ; Memory-Mapped Address LSW
        SIZE = WORD
IOPORT(5) = 0ZC42h      ; Memory-Mapped Address MSW
        SIZE = WORD
IOPORT(6) = 0ZC42h      ; Boot ROM Configuration Register
        SIZE = WORD
IOPORT(7) = 0ZC3Ah      ; Option Register LSW
        SIZE = WORD

SOFTWARE(1) = "
 The following configuration parameters have been selected 
 for the Compex ENET100-VG4/EISA adapter.
 The VGCONFIG.EXE program must be used to
 configure your adapter to match these values.  
 Your network software also may ask you for this data:"

FUNCTION = "Compex ENET100-VG4/EISA Selectable EISA LAN Adapter"
   TYPE = "NET"
   CONNECTION  = "One modular RJ-45 LAN connector for 10BaseT network, and\n
                  one modular RJ-45 LAN connector for 100VG network"

   SUBFUNCTION = "Interrupt Channel (IRQ)"

        CHOICE = "5  - Edge (Factory default)"
		LINK
            IRQ = 5
			SHARE = NO
			TRIGGER = EDGE
            INIT = Software(1) "IRQ  5 (Edge)"

        CHOICE = "3  - Edge"
		LINK
            IRQ = 3
			SHARE = NO
			TRIGGER = EDGE
            INIT = Software(1) "IRQ  3 (Edge)"

        CHOICE = "4  - Edge"
		LINK
            IRQ = 4
			SHARE = NO
			TRIGGER = EDGE
            INIT = Software(1) "IRQ  4 (Edge)"

        CHOICE = "7  - Edge"
		LINK
            IRQ = 7
			SHARE = NO
			TRIGGER = EDGE
            INIT = Software(1) "IRQ  7 (Edge)"

        CHOICE = "9  - Edge"
		LINK
			IRQ = 9
			SHARE = NO
			TRIGGER = EDGE
			INIT = Software(1) "IRQ  9 (Edge)"

        CHOICE = "10 - Edge"
        LINK
            IRQ = 10
            SHARE = NO
            TRIGGER = EDGE
            INIT = Software(1) "IRQ 10 (Edge)"

        CHOICE = "11 - Edge"
        LINK
            IRQ = 11
            SHARE = NO
            TRIGGER = EDGE
            INIT = Software(1) "IRQ 11 (Edge)"

        CHOICE = "12 - Edge"
        LINK
            IRQ = 12
            SHARE = NO
            TRIGGER = EDGE
            INIT = Software(1) "IRQ 12 (Edge)"

        CHOICE = "15 - Edge"
        LINK
            IRQ = 15
            SHARE = NO
            TRIGGER = EDGE
            INIT = Software(1) "IRQ 15 (Edge)"

   SUBFUNCTION = "Memory-Mapped I/O"
	HELP = "The memory-mapped I/O may be utilized by high performance 
		network drivers,
		consult your network driver documentation.\n\n
		It is OK if the memory address selected overlaps the address 
		used for a boot ROM on the same adapter, but overlap is not 
		allowed by this EISA utility. A conflict notice occurs. 
		If address overlap exists, use the 
		EISA utility to enable the boot ROM at the address and disable
		memory-mapped I/O. Then, enable both boot ROM and 
		memory-mapped I/O
                using the adapter's VGCONFIG.EXE program.\n"
	CHOICE = "DISABLE"
                DISABLE = YES
		LINK
			INIT = Software(1) "MEM MAP DISABLED"
	CHOICE = "C8000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0C8000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at C8000h"
	CHOICE = "CC000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0CC000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at CC000h"
	CHOICE = "D0000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0D0000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at D0000h"
	CHOICE = "D4000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0D4000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at D4000h"
	CHOICE = "D8000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0D8000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at D8000h"
	CHOICE = "DC000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0DC000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at DC000h"
	CHOICE = "E0000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0E0000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at E0000h"
	CHOICE = "E4000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0E4000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at E4000h"
	CHOICE = "E8000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0E8000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "MEM MAP at E8000h"
	CHOICE = "EC000h"
		LINK
			MEMORY = 8192
			ADDRESS = 0EC000h
			WRITABLE = YES
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
			INIT = Software(1) "MEM MAP at EC000h"

   SUBFUNCTION = "Boot ROM"
	HELP = " A boot ROM may be installed to allow system boot from a 
             network server.\n\n
             It is OK if the boot ROM address selected overlaps the
             address used for memory-mapped I/O on the same adapter,
             but overlap is not allowed by this EISA utility. A conflict
             notice occurs. If address overlap exists, use the
             EISA utility to enable the boot ROM at the address and disable
             memory-mapped I/O. Then, enable both boot ROM and
             memory-mapped I/O using the adapter's VGCONFIG.EXE program.\n"
	CHOICE = "DISABLE"
		DISABLE = YES
		LINK
            INIT = Software(1) "BOOT ROM DISABLED"

        CHOICE = "8K at B000h"
	    FREE
            MEMORY = 8K
            ADDRESS = 0B0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "8K BOOT ROM at B0000h"

        CHOICE = "8K at C000h"
	    FREE
            MEMORY = 8K
            ADDRESS = 0C0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "8K BOOT ROM at C0000h"

	CHOICE = "8K at D000h"
	    FREE
            MEMORY = 8K
            ADDRESS = 0D0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "8K BOOT ROM at D0000h"

	CHOICE = "8K at E000h"
	    FREE
            MEMORY = 8K
            ADDRESS = 0E0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "8K BOOT ROM at E0000h"

        CHOICE = "16K at B000h"
	    FREE
            MEMORY = 16K
            ADDRESS = 0B0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "16K BOOT ROM at B0000h"

        CHOICE = "16K at C000h"
	    FREE
            MEMORY = 16K
            ADDRESS = 0C0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "16K BOOT ROM at C0000h"

        CHOICE = "16K at D000h"
	    FREE
            MEMORY = 16K
		ADDRESS = 0D0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "16K BOOT ROM at D0000h"

        CHOICE = "16K at E000h"
	    FREE
            MEMORY = 16K
		ADDRESS = 0E0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "16K BOOT ROM at E0000h"

        CHOICE = "32K at B000h"
	    FREE
            MEMORY = 32K
            ADDRESS = 0B0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "32K BOOT ROM at B0000h"

        CHOICE = "32K at C000h"
	    FREE
            MEMORY = 32K
            ADDRESS = 0C0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "32K BOOT ROM at C0000h"

        CHOICE = "32K at D000h"
	    FREE
            MEMORY = 32K
            ADDRESS = 0D0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "32K BOOT ROM at D0000h"

        CHOICE = "32K at E000h"
	    FREE
            MEMORY = 32K
            ADDRESS = 0E0000h
			WRITABLE = NO
			MEMTYPE = OTH
			SIZE = WORD
			CACHE = NO
			SHARE = NO
            INIT = Software(1) "32K BOOT ROM at E0000h"