;  Crescendo Communication Inc., 32-bit EISA FDDI Adapter
;
;  (C)Copyright Crescendo Communication Inc.
;  (C)Copyright 1992
;
;  For Revision 2 Hardware.
;

; Board Identification Block
;
BOARD
   ID = "CRS3202"
   NAME = "Crescendo 320 32-Bit EISA FDDI Adapter"
   MFR = "Crescendo Communication Inc."
   CATEGORY = "NET"
   SLOT = EISA
   LENGTH = 275
;   AMPERAGE = xxxxx     ; in mA
   READID = YES 		    	 ; readable Product ID
   BUSMASTER = 999      ; bus latency
   IOCHECK = INVALID		 	; IOCHKERR bit not supported
   DISABLE = SUPPORTED	 ; usage of ENABLE bit

;   COMMENTS = ""
;   HELP = ""


; Initialization Information block
;
; I/O Port Initialization Statement Block
;
IOPORT(1) = 0zC84h			    ; POS Control Reg
   SIZE = DWORD
   INITVAL = LOC(0) x		  	; Disable card

IOPORT(2) = 0zC90h			    ; Base Address register 0
   SIZE = DWORD

IOPORT(3) = 0zC94h			    ; Base Address register 1
   SIZE = DWORD

IOPORT(4) = 0zC98h			    ; Base Address register 2
   SIZE = DWORD
;
; Switch Configuration Statement Block
;
; NO Switches

;
; Jumper Configuration Statement Block
;
JUMPER(1) = 1
  NAME = "Single Attachment Select Jumper (W1)"
  JTYPE = PAIRED
  VERTICAL = NO
  REVERSE = NO
  INITVAL = LOC(1) 1   ; Jumper installed -> Single Attached 
  LABEL = LOC(1) "SINGLE"
  FACTORY = LOC(1) 1
  COMMENTS = "This jumper is installed for single attached
   configuration. For Dual-Attached configuration the 
   jumper is removed and PAL (U61) should be installed."


FUNCTION = "CARD disable"
  SHOW = NO
  CHOICE = "CARD disable"
  FREE
    INIT = IOPORT(1) LOC(0) 0


FUNCTION = "Interrupt Selection"
  CHOICE = "INTERRUPT 11  level triggered"
  FREE
	   IRQ = 11
    		SHARE = NO
    		TRIGGER = LEVEL

  CHOICE = "INTERRUPT 15  level triggered"
  FREE
    IRQ = 15
    		SHARE  = NO
    		TRIGGER = LEVEL

  CHOICE = "INTERRUPT 12  level triggered"
  FREE
	   IRQ = 12
    		SHARE = NO
    		TRIGGER = LEVEL

  CHOICE = "INTERRUPT 9   level triggered"
  FREE
    IRQ = 9
    		SHARE = NO
    		TRIGGER = LEVEL

  CHOICE = "INTERRUPT 7   level triggered"
  FREE
  	 IRQ = 7
    		SHARE = NO
    		TRIGGER = LEVEL

  CHOICE = "INTERRUPT 5   level triggered"
  FREE
  	 IRQ = 5
    		SHARE = NO
  		  TRIGGER = LEVEL

  CHOICE = "INTERRUPT 3   level triggered"
  FREE
  	 IRQ = 3
    		SHARE = NO
    		TRIGGER = LEVEL


FUNCTION = "Adapter Memory Base Address"
  SHOW = YES
  TYPE = "NET"
  COMMENTS = "Select Base Address to map Adapter memory to"
 	CHOICE = "Base Address at B0000h"
  LINK
	   MEMORY = 8K
		    ADDRESS = 000B0000h
		    WRITABLE = YES
		    MEMTYPE = OTH
		    SIZE = WORD
		    CACHE = NO
      INIT = IOPORT(2) LOC(7-0) 00000000
      INIT = IOPORT(3) LOC(7-0) 00001011
		    INIT = IOPORT(4) LOC(7-0) 11111111

 	CHOICE = "Base Address at D0000h"
  LINK
    MEMORY = 8K
		    ADDRESS = 000D0000h
		    WRITABLE = YES
		    MEMTYPE = OTH
		    SIZE = WORD
		    CACHE = NO
      INIT = IOPORT(2) LOC(7-0) 00000000
		    INIT = IOPORT(3) LOC(7-0) 00001101
		    INIT = IOPORT(4) LOC(7-0) 11111111

 	CHOICE = "Base Address at C0000h"
  LINK
    MEMORY = 8K
		    ADDRESS = 000C0000h
		    WRITABLE = YES
		    MEMTYPE = OTH
		    SIZE = WORD
		    CACHE = NO
      INIT = IOPORT(2) LOC(7-0) 00000000
		    INIT = IOPORT(3) LOC(7-0) 00001100
		    INIT = IOPORT(4) LOC(7-0) 11111111

 	CHOICE = "Base Address at A0000h"
  LINK
    MEMORY = 8K
		    ADDRESS = 000A0000h
		    WRITABLE = YES
		    MEMTYPE = OTH
		    SIZE = WORD
		    CACHE = NO
      INIT = IOPORT(2) LOC(7-0) 00000000
		    INIT = IOPORT(3) LOC(7-0) 00001010
		    INIT = IOPORT(4) LOC(7-0) 11111111