BOARD
	ID = "CTN0101"
	NAME = "Computone ALC Controller"
	MFR = "Computone/WorldWide Technology"
	CATEGORY = "COM"
	SLOT = EISA
	LENGTH = 330
	AMPERAGE = 3000
	SKIRT = NO
	READID = YES
	BUSMASTER = 999
	IOCHECK = INVALID
	DISABLE = UNSUPPORTED
	COMMENTS = "The Computone ALC board provides three high-speed
		    serial links for connecting the following Feature
		    Modules: async (16 ports); async/sync/parallel
		    (8/2/2 ports); fax/scanner.  These may be connected
		    in any combination.  A high-speed parallel link is
		    provided for connecting the Ethernet Feature Module."
	HELP = "No help provided for the ALC BOARD paragraph at present."

;version 1.02 -- 3/26/90

JUMPER(1) = 11
	NAME = "IRQ Interrupt select"
	JTYPE = PAIRED
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-11)"IRQ15""IRQ14""IRQ12""IRQ11""IRQ10""IRQ9""IRQ7"
		"IRQ6""IRQ5""IRQ4""IRQ3"
	FACTORY = LOC(1-11) 00001000000
	COMMENTS = "It is recommended that you select the same IRQ interrupt
		level for all Computone ALC cards installed in your system.
		Do not select an IRQ interrupt level which is used
		by either your system unit or by non-EISA expansion cards.
		You may select the same interrupt level as other 
		non-Computone expansion cards, but this may lower system
		performance."
	HELP = "No help provided for the ALC JUMPER paragraph at present."

IOPORT(1) = PORTVAR(10)
FUNCTION = "Interrupt Selection"
	TYPE = "COM"
	CHOICE = "Level-triggered interrupts"
		PORTVAR(10) = 0ZC8Eh
		LINK
			IRQ = 10 | 3 | 4 | 5 | 6 | 7 | 9 | 11 | 12 | 14 | 15
				SHARE = YES
				TRIGGER = LEVEL
			INIT = JUMPER(1) LOC(1-11)
				00001000000 | 00000000001 | 00000000010 |
				00000000100 | 00000001000 | 00000010000 |
				00000100000 | 00010000000 | 00100000000 |
				01000000000 | 10000000000
			INIT = IOPORT(1) 10000000b | 10000000b |
				10000000b | 10000000b | 10000000b | 10000000b |
				10000000b | 10000000b | 10000000b | 10000000b |
				10000000b
	CHOICE = "Edge-triggered interrupts"
		PORTVAR(10) = 0ZC8Eh
		LINK
			IRQ = 10 | 3 | 4 | 5 | 6 | 7 | 9 | 11 | 12 | 14 | 15
				SHARE = NO
				TRIGGER = EDGE
			INIT = JUMPER(1) LOC(1-11)
				00001000000 | 00000000001 | 00000000010 |
				00000000100 | 00000001000 | 00000010000 |
				00000100000 | 00010000000 | 00100000000 |
				01000000000 | 10000000000
			INIT = IOPORT(1) 00001000b | 00001000b |
				00001000b | 00001000b | 00001000b | 00001000b |
				00001000b | 00001000b | 00001000b | 00001000b |
				00001000b