;
;   DECpc XL Server Series System Board
;
BOARD
  ID="DEC1051"
  NAME="Prioris LX System Board"
  MFR="Digital Equipment Corporation"
  CATEGORY="SYS"
  SLOT=EMB(0)
  READID=YES
  COMMENTS="This is the Prioris LX Series System Board. It consists \n
            of the CPU card and the mainboard. In CPU modules, one is for \n
            486 series CPUs with Saturn chipset. The other is for Pentium \n
            CPU and Neptune chipset. It contains system memmory subsystem \n
            and others controllers to provide serial, keyboard, mouse ports.\n
	    The mainboard module contains PCI/EISA chipsets & others \n
	    controllers to provide parallel, and on-board VGA, Network and SCSI. \n
	    It also provides three PCI 32-bit local I/O expension slots."
HELP="This is the base module configuration options file.  The user
      should review and configure selectable options per system resources."

SYSTEM
  NONVOLATILE = 8K
  AMPERAGE = 13200
  SLOT(1)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(2)  = EISA  LENGTH = 341 BUSMASTER = YES

  SLOT(3)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(4)  = EISA  LENGTH = 341 BUSMASTER = YES

  MEMORY=128M ADDRESS=0K      CACHE=YES
    STEP=128K

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

SWITCH(1)   = 4
   NAME     = "Pentium CPU Board"
   STYPE    = DIP
   VERTICAL = NO
   REVERSE  = NO
   LABEL    = LOC(4 3 2 1) "SW4" "SW3" "SW2" "SW1"
   FACTORY  = LOC(4 3 2 1) 0000
   INITVAL  = LOC(4 3 2 1) xxxx
   COMMENTS = "BUS/CORE RATIC	SW2	SW1\N
               	2/3		[OFF]	[OFF]\N
		1/2		[OFF]	[ON]\N
		1/3		[ON]	[OFF]\N
		2/5		[ON]	[OFF]\N\N
               CPUCLOCK(MHz)	SW4	SW3 \N
               	50		[OFF]	[OFF]\N
               	60		[ON] 	[ON]\N
   	       	66.6 		[OFF]	[ON]"

SWITCH(2)   = 3
   NAME     = "486 CPU Board"
   STYPE    = DIP
   VERTICAL = NO
   REVERSE  = NO
   LABEL    = LOC(3 2 1) "SW3" "SW2" "SW1"
   FACTORY  = LOC(3 2 1) 000
   INITVAL  = LOC(3 2 1) 0xx
   COMMENTS = "SW1(CPUCLOCK) - [ON]:33MHZ [OFF]:25MHZ \N
               SW2(CPUTYPE) - [ON]:AMDDX2 [OFF]:OTHERS\N
               SW3 - [OFF]" 

SWITCH(3)   = 3
   NAME     = "System Board"
   STYPE    = DIP
   VERTICAL = NO
   REVERSE  = NO
   LABEL    = LOC(3 2 1) "SW3" "SW2" "SW1"
   FACTORY  = LOC(3 2 1) 000
   INITVAL  = LOC(3 2 1) xxx
   COMMENTS = "SW1-[ON]:ENABLE BIOS UPGRADE\N
               SW2-[ON]:ENABLE BOOT BLOCK UPGRADE\N
               SW3-[ON]:PASSWORD CLEAR"
	       
;begin ****************** Unchangable Setting ******************************
  FUNCTION = "PCI IO 1"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08000H-081FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 2"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08200H-083FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 3"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08400H-085FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 4"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08600H-087FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 5"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08800H-089FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 6"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08A00H-08BFFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 7"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08C00H-08DFFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 8"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08E00H-08FFFH
        SHARE=YES
        SIZE=BYTE

; end ******************* Unchangeable Setting *******************************

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Include cfg file extension (overlay)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
INCLUDE = "DEC1051.OVL"