;
;   Digital Prioris Series System Board
;
BOARD
  ID="DEC5201"
  NAME="Digital Prioris System Board"
  MFR="Digital Equipment Corporation"
  CATEGORY="SYS"
  SLOT=EMB(0)
  READID=YES
  COMMENTS="The Digital Prioris HX Series computers are basically\n\
      designed in following configuration:  It consists of the CPU card,\n\
      the mainboard, memory card, PCI SCSI board, operator control panel\n\
      (OCP) board, and SCSI backplane."  
HELP="This is the base module configuration options file.  The user
      should review and configure selectable options per system resources."

SYSTEM
  NONVOLATILE = 8K
  AMPERAGE = 13200
  SLOT(1)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(2)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(3)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(4)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(5)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(6)  = EISA  LENGTH = 341 BUSMASTER = YES

  MEMORY=128M ADDRESS=0K      CACHE=YES
    STEP=128K

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

JUMPER(1)  = 1
  NAME     = "VGA IRQ 9 - J9"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "DIS"
  FACTORY  = LOC(2^1) 0
  INITVAL  = LOC(2^1) 0
  COMMENTS = "VGA IRQ 9 select: Enable/Disable."


JUMPER(2)  = 1
  NAME     = "ONBOARD VGA - J17"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "ENA"
  FACTORY  = LOC(2^1) 1
  INITVAL  = LOC(2^1) 1
  COMMENTS = "Onboard VGA Enable: Enable/Disable."


JUMPER(3)  = 2
  NAME     = "BOOT BLOCK - J28"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = YES
  LABEL    = LOC(1^2 2^3) "" "DIS"
  FACTORY  = LOC(1^2 2^3) 10
  INITVAL  = LOC(1^2 2^3) 10
  COMMENTS = "Boot Block Update: Enable/Disable."
  

JUMPER(4)  = 1
  NAME     = "PASSWORD CLEAR - J38"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "NML"
  FACTORY  = LOC(2^1) 0
  INITVAL  = LOC(2^1) 0
  COMMENTS = "Password Clear : Normal Mode / Factory Test & Password clear."


JUMPER(5)  = 1
  NAME     = "RECOVERY MODE - J39"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "NML"
  FACTORY  = LOC(2^1) 0
  INITVAL  = LOC(2^1) 0
  COMMENTS = "Recovery Mode :  Recovery / Normal."


JUMPER(6)  = 1
  NAME     = "BIOS UPGRADE - J41"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "ENA"
  FACTORY  = LOC(2^1) 1
  INITVAL  = LOC(2^1) 1
  COMMENTS = "BIOS Upgrade : Enable / Disable."


JUMPER(7)  = 1
  NAME     = "DSM INSTALL - J42"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "NO"
  FACTORY  = LOC(2^1) 1
  INITVAL  = LOC(2^1) 1
  COMMENTS = "DSM Install: Not install / Install."  

JUMPER(8)  = 1
  NAME     = "CPU FREQUENCY RATIO - J4"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "3/2"
  INITVAL  = LOC(2^1) 0
  COMMENTS = "CPU core/bus Frequency Ratio:3/2 Speed bus or 2/1."
	      


JUMPER(9)  = 1
  NAME     = "CPU PIPELINE MODE - J8"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "ENA"
  FACTORY  = LOC(2^1) 1
  INITVAL  = LOC(2^1) 1
  COMMENTS = "CPU Pipeline Mode: Enable Pipeline/Disable."

	      
;begin ****************** Unchangable Setting ******************************
  FUNCTION = "PCI IO 1"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08000H-081FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 2"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08200H-083FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 3"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08400H-085FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 4"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08600H-087FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 5"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08800H-089FFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 6"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08A00H-08BFFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 7"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08C00H-08DFFH
        SHARE=YES
        SIZE=BYTE

  FUNCTION = "PCI IO 8"
  SHOW=NO
    CHOICE="Enable"
      link
        PORT=08E00H-08FFFH
        SHARE=YES
        SIZE=BYTE

; end ******************* Unchangeable Setting *******************************

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Include cfg file extension (overlay)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
INCLUDE = "DEC5201.OVL"