;
;   Digital Prioris Series System Board
;
BOARD
  ID="DEC5205"
; David Hsu=>original:  NAME="Prioris MX Series Computer"
  NAME="DIGITAL (TM) Server"
  MFR="Digital Equipment Corporation"
  CATEGORY="SYS"
  SLOT=EMB(0)
  READID=YES
  COMMENTS=" This DIGITAL Server Series basically designed in following
             configuration : It consists of the processor/memory module, the main
	     logic board, and SCSI backplane. The processor/memory modules is
	     for Pentium Pro-based processors with ECC memory module. The main 
	     logic board contains PCI/EISA chipsets & others controllers to 
	     provide PC-compatible parallel, serial, keyboard, mouse ports,
	     and on-board VGA, Ethernet and one PCI/SCSI adapter. It also
	     provides 2 dedicated PCI expansion slots, 4 dedicated EISA 
	     expansion slots, and 1 interleaved PCI/EISA expansion slot."
  HELP=" This is the base module configuration options file. The user should 
         review and configure selectable options per system resources."

SYSTEM
  NONVOLATILE = 8K
  AMPERAGE = 13200
  SLOT(1)  = EISA(1)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 1"
  SLOT(2)  = EISA(2)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 2"
  SLOT(3)  = EISA(3)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 3"
  SLOT(4)  = EISA(4)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 4"
  SLOT(5)  = EISA(5)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 5"

  MEMORY=640K ADDRESS=0K CACHE=YES STEP=128K

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

SWITCH(1)   = 8
   NAME     = "Main Logic Board"
   STYPE    = DIP
   VERTICAL = YES
   REVERSE  = YES
   LABEL    = LOC(1-8) "SW1" "SW2" "SW3" "SW4" "SW5" "SW6" "SW7" "SW8"
   FACTORY  = LOC(1-8) 10101000
   INITVAL  = LOC(1-8) xxxxxx00
   COMMENTS = "[SWITCH]                 [OFF]      [ON]\N
                SW1-BIOS UPGRADE        DISABLED   ENABLED\N
                SW2-RECOVERY MODE       NORMAL     ENABLED\N
                SW3-BOOT BLOCK UPGRADE  DISABLED   ENABLED\N
                SW4-PASSWORD CLEAR      NORMAL     ENABLED\N
                SW5-RSM                 INSTALLED  NOT INSTALLED\N
                SW6-NVRAM CLEAR         NORMAL     ENABLED\N
                SW7-RESERVED\N
                SW8-RESERVED\N"

SWITCH(2)   = 4
   NAME     = "Pentium Pro Board"
   STYPE    = DIP
   VERTICAL = YES
   REVERSE  = YES
   LABEL    = LOC(1-4) "SW1" "SW2" "SW3" "SW4"
   FACTORY  = LOC(1-4) 1101
   INITVAL  = LOC(1-4) xxxx
   COMMENTS = "[SWITCH]     [UP(OFF)]   [DN(ON)]\N
                SW1- CLOCK   60.00MHz    66.66MHz\N
	       \N
	      [FREQ.]  [SW2]      [SW3]      [SW4]\N
	       2X      [DN(ON)]   [DN(ON)]   [DN(ON)]\N
	       2.5X    [UP(OFF)]  [DN(ON)]   [DN(ON)]\N   
	       3X      [DN(ON)]   [UP(OFF)]  [DN(ON)]\N   
	       3.5X    [UP(OFF)]  [UP(OFF)]  [DN(ON)]\N   
	       4X      [DN(ON)]   [DN(ON)]   [UP(OFF)]\N" 

SWITCH(3)   = 8
   NAME     = "Pentium II Board"
   STYPE    = DIP
   VERTICAL = YES
   REVERSE  = YES
   LABEL    = LOC(1-8) "SW1" "SW2" "SW3" "SW4" "SW5" "SW6" "SW7" "SW8"
   FACTORY  = LOC(1-8) 00110000
   INITVAL  = LOC(1-8) xxxxxxxx
   COMMENTS = 
   "[FREQ.]  [SW1]     [SW2]     [SW3]     [SW4]\N
    3X     [DN(ON)]  [UP(OFF)] [DN(ON)]  [DN(ON)]\N
    3.5X   [UP(OFF)] [UP(OFF)] [DN(ON)]  [DN(ON)]\N   
    4X     [DN(ON)]  [DN(ON)]  [UP(OFF)] [DN(ON)]\N   
    4.5X   [UP(OFF)] [DN(ON)]  [UP(OFF)] [DN(ON)]\N   
    5X     [DN(ON)]  [UP(OFF)] [UP(OFF)] [DN(ON)]\N 
    5.5X   [UP(OFF)] [UP(OFF)] [UP(OFF)] [DN(ON)]\N   
    6X     [DN(ON)]  [DN(ON)]  [DN(ON)]  [UP(OFF)]\N 
    6.5X   [UP(OFF)] [DN(ON)]  [DN(ON)]  [UP(OFF)]\N   
    7X     [DN(ON)]  [UP(OFF)] [DN(ON)]  [UP(OFF)]\N 
    7.5X   [UP(OFF)] [UP(OFF)] [DN(ON)]  [UP(OFF)]\N   
    8X     [DN(ON)]  [DN(ON)]  [UP(OFF)] [UP(OFF)]\N
   [CLOCK]   [SW5]\N
   60.00MHZ  [DN(ON)]\N
   66.66MHz  [UP(OFF)]\N"

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Include cfg file extension (overlay)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
INCLUDE = "DEC5205.OVL"