;
; (C)Copyright Hewlett-Packard Co., 1990
;    All Rights Reserved.
;
	BOARD
	    ID = "HWP0CC0"
	    NAME = "Set drive types for non-HP hard disk controllers."
 	    MFR = "Hewlett-Packard Co."
	    CATEGORY = "MSD"
	    SLOT = VIR
	    COMMENTS = "\ Add this .CFG file if:\n\n
			\ o you have a non-HP hard disk controller installed in an\n
			\   HP Vectra 486/25, 486/25T, or 486/33T.\n\n
			\ o you have a drive to be used with MS-DOS, which exceeds\n
			\   the cylinder (1024) and capacity (528 MB) limitations\n
			\   of MS-DOS, and is not listed in the drive type table.\n\n
			\   (You need ROM version G.03.09 or later for the HP Vectra\n
			\   486/25 or 486/25T, or ROM version K.03.05 or later for\n
			\   the HP Vectra 486/33T to use this feature).\n\n
			\ Refer to the READ.ME file on this disk for further\n
			\ instructions regarding this .CFG file and its use.\n
			"			
	INCLUDE="HWP0CC0.OVL"