; Intel EtherExpress(tm) Flash32 32-bit EISA Ethernet Adapter
; (C) Copyright Intel Corp., 1993
; All Rights Reserved
;
; Date - 09/22/94
; Version - 1.01
; Filename - !INT1010.CFG

BOARD
	ID = "INT1010"
	NAME = "Intel EtherExpress(tm) Flash32 Ethernet Adapter"
	MFR = "INTEL"
	CATEGORY = "NET"
	SLOT = EISA
	LENGTH = 260
	AMPERAGE = 1000
	SKIRT = NO
	READID = YES
	BUSMASTER = 40
	IOCHECK = INVALID
	DISABLE = SUPPORTED

	COMMENTS = "\nEtherExpress(tm) Flash32 Configuration File V1.00"

	HELP = "Press ENTER to review and configure these items:\n\n
	\to Interrupt\n 
	\to Connector type\n
	\to Flash memory range\n
	\to Flash remote boot program"

IOPORT(1) = 0zC88h	;PLX Asic
INITVAL = 11XX0XXX

IOPORT(2) = 0zC89h
IOPORT(3) = 0zC8Ah
IOPORT(4) = 0zC8Fh

IOPORT(5) = 0z400h	;FLEA Asic
INITVAL = 1XXXXXXX

IOPORT(6) = 0z410h
IOPORT(7) = 0z430h

IOPORT(8) = 0z008h
SIZE = DWORD
INITVAL = 0000000000000000000000000000000X

; INCLUDE="INT1010.OVL"
; BEGINOVL

FUNCTION = "Interrupt"

HELP = "INTERRUPT displays a list of available interrupts from which you
       can select.  The EtherExpress adapter and its software use one of
       several possible interrupts.  The adapter must have its own
       interrupt, one not use by other boards."

COMMENTS = "Select an interrupt not used by other boards."

	CHOICE = "IRQ 10 (Default)"
	LINK
	IRQ = 10
	SHARE = NO
	TRIGGER = EDGE
 	INIT = IOPORT(1) LOC(2-0) 101
	INIT = IOPORT(7) LOC(7-3) 00011
        INIT = IOPORT(8) LOC(0) 0

	CHOICE = "IRQ 11"
	LINK
	IRQ = 11
	SHARE = NO
	TRIGGER = EDGE
 	INIT = IOPORT(1) LOC(2-0) 111
	INIT = IOPORT(7) LOC(7-3) 00011
        INIT = IOPORT(8) LOC(0) 0

	CHOICE = "IRQ 12"
	LINK
	IRQ = 12
	SHARE = NO
	TRIGGER = EDGE
 	INIT = IOPORT(1) LOC(0) 0
 	INIT = IOPORT(7) 10011100
        INIT = IOPORT(8) LOC(0) 0

	CHOICE = "IRQ 15"
	LINK
	IRQ = 15
	SHARE = NO
	TRIGGER = EDGE
 	INIT = IOPORT(1) LOC(0) 0
 	INIT = IOPORT(7) 10011110
        INIT = IOPORT(8) LOC(0) 0

	CHOICE = "IRQ 9"
	LINK
	IRQ = 9
	SHARE = NO
	TRIGGER = EDGE
 	INIT = IOPORT(1) LOC(2-0) 011
	INIT = IOPORT(7) LOC(7-3) 00011
        INIT = IOPORT(8) LOC(0) 0

	CHOICE = "IRQ 7"
	LINK
	IRQ = 7
	SHARE = NO
	TRIGGER = EDGE
 	INIT = IOPORT(1) LOC(0) 0
 	INIT = IOPORT(7) 10011010
        INIT = IOPORT(8) LOC(0) 0

	CHOICE = "IRQ 5"
	LINK
	IRQ = 5
	SHARE = NO
	TRIGGER = EDGE
	INIT = IOPORT(1) LOC(2-0) 001
	INIT = IOPORT(7) LOC(7-3) 00011
        INIT = IOPORT(8) LOC(0) 0
	
	CHOICE = "IRQ 3"
	LINK
	IRQ = 3
	SHARE = NO
	TRIGGER = EDGE
 	INIT = IOPORT(1) LOC(0) 0
 	INIT = IOPORT(7) 10011000
        INIT = IOPORT(8) LOC(0) 0

FUNCTION = "Connector type"

HELP = "CONNECTOR TYPE identifies the type of connector being used.\n\n
	o Auto-detect (the network driver automatically determines the
	connector type)\n\n
	o AUI connector (used for thick Ethernet cabling)\n\n
	o BNC connector (used for thin Ethernet cabling)\n\n
	o RJ-45 connector (used for twisted-pair Ethernet cabling)"

COMMENTS = "Select AUTO-DETECT to have the network driver automatically
	   determine the connector type.  Select AUI CONNECTOR for thick
	   Ethernet cable, BNC CONNECTOR for thin Ethernet, or
	   RJ-45 CONNECTOR for twisted-pair Ethernet cabling."

	CHOICE = "Auto-detect (Default)"
	LINK
	INIT = IOPORT(2) LOC(1-0) 10
	INIT = IOPORT(6) LOC(3) 0

	CHOICE = "AUI connector"
	LINK
	INIT = IOPORT(2) LOC(1-0) 10
	INIT = IOPORT(6) LOC(3) 1
	
	CHOICE = "BNC connector"
	LINK
	INIT = IOPORT(2) LOC(1-0) 00
	INIT = IOPORT(6) LOC(3) 1

	CHOICE = "RJ-45 connector"
	LINK
	INIT = IOPORT(2) LOC(1-0) 11
	INIT = IOPORT(6) LOC(3) 1

FUNCTION = "Flash memory range"

HELP = "FLASH MEMORY RANGE displays a list of available memory addresses
	for the flash memory which you can select.  The flash chip uses an
	8 Kbyte window of high memory that begins at the address you specify
	in this parameter.  If you need to use a remote boot program contained
	in the flash chip, be sure to identify the program in FLASH REMOTE
	BOOT PROGRAM."

COMMENTS = "Select the memory address you want the flash chip to use. If you
	    aren't using flash memory, select FLASH MEMORY DISABLED."
	    
	CHOICE = "D000-D1FFh (Default)"
	COMBINE
	MEMORY=8K
	ADDRESS=0D0000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 1000
	
	CHOICE = "C800-C9FFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0C8000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
  	INIT = IOPORT(5) LOC(3-0) 0100
	
	CHOICE = "CA00-CBFFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0CA000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 0101
	
	CHOICE = "CC00-CDFFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0CC000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 0110

	CHOICE = "CE00-CFFFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0CE000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 0111

	CHOICE = "D200-D3FFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0D2000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 1001
	
	CHOICE = "D400-D5FFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0D4000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 1010

	CHOICE = "D600-D7FFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0D6000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3 2 1 0) 1011

	CHOICE = "D800-D9FFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0D8000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 1100
	
	CHOICE = "DA00-DBFFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0DA000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 1101

	CHOICE = "DC00-DDFFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0DC000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 1110

	CHOICE = "DE00-DFFFh"
	COMBINE
	MEMORY=8K
	ADDRESS=0DE000H
	WRITABLE=NO
	MEMTYPE=OTH
	SHARE=NO
	SIZE=BYTE
	CACHE=NO
	DECODE=24
	INIT = IOPORT(6) LOC(2) 1
	INIT = IOPORT(5) LOC(3-0) 1111

	CHOICE = "Flash disabled"
	FREE
	INIT = IOPORT(6) LOC(2) 0
  	INIT = IOPORT(5) LOC(3-0) 1000

FUNCTION = "Flash remote boot program"

HELP = "The flash chip contains remote boot programs that workstations, usually
	diskless, can use to boot from the network.  FLASH REMOTE BOOT
	PROGRAM identifies the type of remote boot program you would like to
	use.  If you're using a remote boot program, be sure to select a memory
	address for the flash in the FLASH MEMORY RANGE."

COMMENTS = "Select the remote boot program you want your workstation to use.
	   Be sure to select a memory address for the flash memory in
	   FLASH MEMORY RANGE."
	   
	CHOICE = "None (Default)"
	FREE
	INIT = IOPORT(6) LOC(5-4) 00

	CHOICE = "NetWare ODI"
	FREE
	INIT = IOPORT(6) LOC(5-4) 11

			
; ENDOVL