;----------------------------------------------------------------------
;----------------------------------------------------------------------
;                                                              
;  HP NetServer LS System Board
;
BOARD
  ID="INT3190"
  NAME="HP NetServer LS System Board"
  MFR="Hewlett-Packard Co."
  CATEGORY="SYS"
  SLOT=EMB(0)
  READID=YES
  COMMENTS="This system board contains the following on-board
            features:\n
	    \t1)  2 CPU module slots supporting up to\n
            \t\t4 processors,\n
	    \t2)  2 ECC Memory connectors\n
            \t\t(Up to 768MB Total Memory),\n
	    \t3)  5 PCI connectors,\n
	    \t4)  6 EISA connectors,\n
	    \t5)  Static RAM Cache,\n
	    \t6)  Shadow RAM Control,\n
	    \t7)  Paged Memory,\n
	    \t8)  Dual I/O APIC Units,\n
	    \t9)  1 Parallel Port,\n
	    \t10) 2 Serial Ports,\n
	    \t11) Onboard Video Controller,\n
	    \t12) Onboard Floppy Controller,\n
	    \t13) Onboard IDE Hard Disk Controller,\n
	    \t14) Onboard mouse/keyboard interface,\n
        \t15) 2 Onboard SCSI Controllers.\n"
HELP="This is the base module configuration options file.  The user
      should review and configure selectable options per system resources."

SYSTEM
  NONVOLATILE = 8K                               
  AMPERAGE = 15000
  ENDSCANSLOT = 6
  SLOT(0) = EISA(0)    LABEL="System"
  SLOT(1) = EISA(1)    LABEL="EISA 1" LENGTH=341 BUSMASTER=YES
  SLOT(2) = EISA(2)    LABEL="EISA 2" LENGTH=341 BUSMASTER=YES
  SLOT(3) = EISA(3)    LABEL="EISA 3" LENGTH=341 BUSMASTER=YES
  SLOT(4) = EISA(4)    LABEL="EISA 4" LENGTH=341 BUSMASTER=YES
  SLOT(5) = EISA(5)    LABEL="EISA 5" LENGTH=341 BUSMASTER=YES
  SLOT(6)=  EISA(6)    LABEL="EISA 6" LENGTH=341 BUSMASTER=YES
  SLOT(7) = PCI(0,11)  LABEL="PCI 1"
  SLOT(8) = PCI(0,12)  LABEL="PCI 2"
  SLOT(9) = PCI(0,13)  LABEL="PCI 3"
  SLOT(10)= PCI(1,12)  LABEL="PCI 4"
  SLOT(11)= PCI(1,15)  LABEL="PCI 5"
  SLOT(12)= PCI(1,13)  LABEL="SCSI A"
  SLOT(13)= PCI(1,14)  LABEL="SCSI B"

  MEMORY=640K ADDRESS=0K      CACHE=YES
    STEP=32K

  MEMORY=384K ADDRESS=0A0000h CACHE=YES
    STEP=32K
;
;  MEMORY=32K  ADDRESS=0C0000h CACHE=YES
;    STEP=32K
;
;  MEMORY=96K  ADDRESS=0C8000h CACHE=YES
;    STEP=32K
;
;  MEMORY=128K ADDRESS=0E0000h CACHE=YES
;    STEP=32K

  MEMORY=768M ADDRESS=1M      CACHE=YES
    STEP=32K


IOPORT(1)       = 0zC02h
	SIZE    = BYTE
	INITVAL = rrrrxrrr
IOPORT(2)=09c5ch                        ;Interrupt definition
	INITVAL = X000XXXX                                      

IOPORT(3)=09c84h                        ;Interrupt definition
	INITVAL = rrrrrrrX                                      

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; include the configuraton file extension (overlay)

INCLUDE = "INT3190.OVL"
; line 177
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
   
GROUP = "Reserved System Resources"
FUNCTION = "Reserved 1"
TYPE = "RES1"
SHOW = NO
  CHOICE = "Reserved 1"
    FREE
    PORT = 0C80H-0C83H                  ; Reserve EISA ID ports
    PORT = 01C80H-01C83H
    PORT = 02C80H-02C83H
    PORT = 03C80H-03C83H
    PORT = 04C80H-04C83H
    PORT = 05C80H-05C83H
    PORT = 06C80H-06C83H

    DMA = 4                             ; Reserve EISA DMA ports
    PORT = 0H-0FH
    PORT = 80H-90H
    PORT = 94H-9FH
    PORT = 0C0H-0DEH
    PORT = 040BH
    PORT = 0410H-0440H
    PORT = 0481H-0483H
    PORT = 0487H
    PORT = 0489H-048CH
    PORT = 04D6H

FUNCTION = "Reserved 2"
TYPE = "RES2"
SHOW = NO
  CHOICE = "Reserved 2"
  FREE
    PORT = 020H-021H                    ; Reserve ISA PIC ports
    PORT = 0A0H-0A1H

    IRQ = 0                             ; Reserve Timer Ports
    PORT = 040H-043H

    IRQ = 8                             ; Reserved RTC ports
    PORT = 070H-071H

    PORT = 061H                         ; Reserved Speaker Ports

    IRQ = 13                            ; Reserved Math Co-Processor ports
    PORT = 0F0H-0FFH

    IRQ = 1                             ; Reserved Keyboard Controller ports
    PORT = 060H
    PORT = 064H

FUNCTION = "Reserve VGA Memory"
TYPE = "VGAA"
SHOW = YES
HELP = "These resources are required by the on-board VGA controller.
        If the on-board VGA controller is disabled on the baseboard
        the user should also change this selection to 'disable' to
        allow an off-board video controller to access the standard
        video resources."
  CHOICE = "Reserve VGA Memory (On-board video)"
  FREE
    MEMORY = 64K
      ADDRESS=0A0000H
      MEMTYPE=OTH

    MEMORY = 64K
      ADDRESS=0B0000H
      MEMTYPE=OTH

    MEMORY = 32K
      ADDRESS=0C0000H
      MEMTYPE=OTH
      WRITABLE=NO
      CACHE=YES
   
    PORT=03B4H-03B5H
    PORT=03BAH
    PORT=03C0H-03CAH
    PORT=03CCH
    PORT=03CEH-03CFH
    PORT=03D4H-03D5H
    PORT=03DAH

  CHOICE = "Disable On-board Video"

FUNCTION = "Reserved 3"
TYPE = "RES3"
SHOW = NO
    CHOICE = "Reserved 3"
    FREE
      MEMORY = 96K                      ; Reserved System Memory
        ADDRESS=0E8000H
        MEMTYPE=OTH
        WRITABLE=NO
        CACHE=YES

      MEMORY = 512K                     ; Reserved System Memory
        ADDRESS=0FFF80000H
        MEMTYPE=OTH
        WRITABLE=NO
        CACHE=YES

      MEMORY = 4K                       ; Reserved P54C Memory
        ADDRESS=0FEE00000H
        MEMTYPE=OTH
        CACHE=YES

      MEMORY = 1K                       ; Reserve ESC Resources
        ADDRESS=0FEC00000H
        MEMTYPE=OTH
        CACHE=YES

      PORT = 0CA0H-0CA1H                ; Reserve IC2 ports

FUNCTION = "HP System ID"
TYPE = "HP_PC,NAME=NETSERVER LS,SPU_NUM=42"
SHOW= NO
  CHOICE = "Reserved"

ENDGROUP


FUNCTION="PCI Write Posting"
SHOW= NO
COMMENTS="Disabling this feature to avoid an intermittent hardware
        live-lock problem seen with EISA and PCI cards installed in system."
  CHOICE="Disabled"
  FREE
    ;Disable Master Write Posting (XPC register 52h bit 5)
    INIT=PORTADR(0CF8h) DWORD 10000000000000000000000001010000b
    INIT=PORTADR(0CFEh) BYTE  rr0rrrrr