BOARD ; 10/19 KN New Structure, 01/05 gha Chg
 ID="ISA8503"
 NAME="DCA IRMA3 Convertible"
 MFR="DCA"
 CATEGORY="COM"
 SLOT=ISA8
 LENGTH=280

 HELP="Use the V)iew D)etail by Slot mode to see allocation of Resources
by Function. Use E)dit Change F)unction to select Options."

SWITCH(1)=8
 NAME="I/O Address"
 STYPE=DIP
 REVERSE=YES
 COMMENTS="\nIn contrast to IRMA 3 Hardware Installation Guide,
 this utility shows bit 1 as a switch in position ON." 

JUMPER(1)=2
 NAME="J1 Rec Sensitivity"
 JTYPE=inline
 REVERSE=YES
 LABEL=LOC(1^2 2^3) "Lo" "Hi"
 
JUMPER(2)=2
 NAME="J2 Cable Mode"
 JTYPE=inline
 REVERSE=YES
 LABEL=LOC(1^2 2^3) "Twisted" "Coaxial"

SOFTWARE(1)="Be Sure to Configure IRMA 3 Convertible Software
to Use the Selected Resource Options: "

FUNCTION="IRMA 3 Communications"
 TYPE="COM,SYN"
 CHOICE="I/O Address"
 LINK
 PORT=0200h|0240h|0260h|02E0h
 INIT=SWITCH(1) LOC(1-8)
 11111111|11110111|11110011|11100011
 INIT=SOFTWARE(1)
 "IOPorts 0200"|"IOPorts 0240"| "IOPorts 0260"| "IOPorts 02E0"

FUNCTION="IRMA 3 Receiver Sensitivity"
 CHOICE="Hi Sensitivity"
 LINK 
 INIT=JUMPER(1) LOC(2^3) 1
 INIT=SOFTWARE(1) "High Rec Sensitivity" 
 CHOICE="Lo Sensitivity"
 LINK
 INIT=JUMPER(1) LOC(1^2) 1
 INIT=SOFTWARE(1) "Low Rec Sensitivity" 

FUNCTION="IRMA 3 Cable Mode"
 CHOICE="Coaxial"
 LINK
 INIT=JUMPER(2) LOC(2^3) 1
 INIT=SOFTWARE(1) "Coaxial Cable" 
 CHOICE="Twisted Pair"
 LINK
 INIT=JUMPER(2) LOC(1^2) 1
 INIT=SOFTWARE(1) "Twisted Pair"