BOARD			; 10/24 fcm Chg STR 053; 11/90 dmw Chg STR 66
 ID="ISA8B00"
 NAME="DEC DEPCA EtherLink Adapter, Rev D1"
 MFR="DEC"
 CATEGORY="NET"
 SLOT=ISA8
 LENGTH=336
 COMMENTS="
The Local Area Disk Driver and Screen Driver must be 
installed by adding the following to CONFIG.SYS\n
	\tDEVICE=LADDRV.sys\n
	\tDEVICE=ANSI.sys\n
\n
The following DOS Environment Variable Recommendations
should also be added to the CONFIG.SYS file.\n
	\tLASTDRIVE=Z\n
	\tBUFFERS=30\n
	\tFILES=20"
JUMPER(1) = 5
 JTYPE=TRIPOLE
 NAME="W1-W5"
 LABEL=LOC(1-5) "W1" "W2" "W3" "W4" "W5"
 REVERSE=YES
 FACTORY=LOC(1-5) 10NNN
 COMMENTS="
The top positions specify the Mouse IRQ, the bottom 
positions specify the Network Interface IRQ.\n
Only two jumpers may be used at any one time in any of 
these 5 positions, one on the upper pins, 
the other on the lower pins."
JUMPER(2) = 1
 JTYPE=PAIRED
 NAME="W6"
 FACTORY=LOC(1) 1
 COMMENTS="I/O Address Range Selection"
JUMPER(3) = 2
 JTYPE=PAIRED
 NAME="W7-W8"
 FACTORY=LOC(2 1) 11
 COMMENTS="Memory Modes. W8 jumper should not be removed, as this
 Option is no longer supported."
JUMPER(4) = 6
 JTYPE=TRIPOLE
 NAME="W9-W14"
 REVERSE=YES
 FACTORY=LOC(1-6) 000000
 LABEL=LOC(1-6) "W9" "W10" "W11" "W12" "W13" "W14"
 COMMENTS="
Thinwire/Transceiver Cable Selection.\n
ALL SIX jumpers must be either 
DOWN (Thinwire) or UP (Transceiver).\n
If set UP for Transceiver Connection, 
remove Jumper from W17 also."
JUMPER(5) = 1
 JTYPE=PAIRED
 NAME="W15"
 FACTORY=LOC(1) 1
 COMMENTS="Transceiver Cable Grounding"
JUMPER(6) = 1
 JTYPE=PAIRED
 NAME="W16"
 FACTORY=LOC(1) 1
 COMMENTS="
Remote Boot Jumper.\n
Remote Boot feature is supported by 
PCSA Client Software Version 2.0 or greater."
JUMPER(7) = 1
 JTYPE=PAIRED
 NAME="W17"
 FACTORY=LOC(1) 1
 COMMENTS="DC Power for Thinwire Connection"
FUNCTION="ThinWire/Transcvr Cable Network"
 TYPE = "NET"
 COMMENTS="Connection can be to ThinWire network or standard Ethernet
 network Transceiver Cable (AUI option). Default is ThinWire."
 CHOICE="ThinWire Network Connection"
 FREE
 INIT=JUMPER(4) LOC(1-6) 000000
 INIT=JUMPER(7) LOC(1) 1
 LINK
 PORT=300h-30Fh|200h-20Fh
 INIT=JUMPER(2) LOC(1) 1|0
 CHOICE="Transceiver Cable(AUI) Network"
 FREE
 INIT=JUMPER(4) LOC(1-6) 111111
 INIT=JUMPER(7) LOC(1) 0
 LINK
 PORT=300h-30Fh|200h-20Fh
 INIT=JUMPER(2) LOC(1) 1|0
FUNCTION="Network/Mouse IRQ Options"
 CHOICE="IRQ3/IRQ9(2)"
  FREE
   IRQ=9
  FREE
   IRQ=3
   INIT=JUMPER(1) LOC(1-5) 10nnn
 CHOICE="IRQ9(2)/IRQ3"
  FREE
   IRQ=9
  FREE
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) 01nnn
 CHOICE="IRQ9(2)/IRQ4"
  FREE
   IRQ=9
  FREE
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) 0n1nn
 CHOICE="IRQ9(2)/IRQ5"
  FREE
   IRQ=9
  FREE
   IRQ=5
   INIT=JUMPER(1) LOC(1-5) 0nn1n
 CHOICE="IRQ9(2)/IRQ7"
  FREE
   IRQ=9
  FREE
   IRQ=7
   INIT=JUMPER(1) LOC(1-5) 0nnn1
 CHOICE="IRQ3/IRQ4"
  FREE
   IRQ=3
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) n01nn
 CHOICE="IRQ3/IRQ5"
  FREE
   IRQ=3
   IRQ=5
   INIT=JUMPER(1) LOC(1-5) n0n1n
 CHOICE="IRQ3/IRQ7"
  FREE
   IRQ=3
   IRQ=7
   INIT=JUMPER(1) LOC(1-5) n0nn1
 CHOICE="IRQ4/IRQ9(2)"
  FREE
   IRQ=9
   FREE
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) 1n0nn
 CHOICE="IRQ4/IRQ3"
  FREE
   IRQ=3
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) n10nn
 CHOICE="IRQ4/IRQ5"
  FREE
   IRQ=5
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) nn010
 CHOICE="IRQ4/IRQ7"
  FREE
   IRQ=7
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) nn0n1
 CHOICE="IRQ5/IRQ9(2)"
  FREE
   IRQ=9
   FREE
   IRQ=5
   INIT=JUMPER(1) LOC(1-5) 1nn0n
 CHOICE="IRQ5/IRQ3"
  FREE
   IRQ=3
   IRQ=5
   INIT=JUMPER(1) LOC(1-5) n1n0n
 CHOICE="IRQ5/IRQ4"
  FREE
   IRQ=5
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) nn10n
 CHOICE="IRQ5/IRQ7"
  FREE
   IRQ=5
   IRQ=7
   INIT=JUMPER(1) LOC(1-5) nnn01
 CHOICE="IRQ7/IRQ9(2)"
  FREE
   IRQ=9
   FREE
   IRQ=7
   INIT=JUMPER(1) LOC(1-5) 1nnn0
 CHOICE="IRQ7/IRQ3"
  FREE
   IRQ=3
   IRQ=7
   INIT=JUMPER(1) LOC(1-5) n1nn0
 CHOICE="IRQ7/IRQ4"
  FREE
   IRQ=7
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) nn1n0
 CHOICE="IRQ7/IRQ5"
  FREE
   IRQ=5
   IRQ=7
   INIT=JUMPER(1) LOC(1-5) nnn10
 CHOICE="IRQ9(2)/Disable"
  FREE
   IRQ=9
  FREE
   INIT=JUMPER(1) LOC(1-5) 0nnnn
 CHOICE="IRQ3/Disable"
  FREE
   IRQ=3
   INIT=JUMPER(1) LOC(1-5) n0nnn
 CHOICE="IRQ4/Disable"
  FREE
   IRQ=4
   INIT=JUMPER(1) LOC(1-5) nn0nn
 CHOICE="IRQ5/Disable"
  FREE
   IRQ=5
   INIT=JUMPER(1) LOC(1-5) nnn0n
 CHOICE="IRQ7/Disable"
  FREE
   IRQ=7
   INIT=JUMPER(1) LOC(1-5) nnnn0
FUNCTION="Transceiver Cable Grounding Option"
 COMMENTS="If the AUI Cable option is chosen, then if the cable connector
 has 9 pins, remove jumper W15."
 CHOICE="15 Pin Transceiver Connector"
 FREE
 INIT=JUMPER(5) LOC(1) 1
 CHOICE="9 Pin Transceiver Connector"
 FREE
 INIT=JUMPER(5) LOC(1) 0
FUNCTION="Remote Boot Option"
 CHOICE="Disable Remote Boot"
 FREE
 INIT=JUMPER(6) LOC(1) 1
 CHOICE="Enable Remote Boot"
 FREE
 INIT=JUMPER(6) LOC(1) 0
FUNCTION="Memory Modes"
 COMMENTS="W8 jumper should not be removed. Option is no longer supported."
 CHOICE="64k Memory Buffer"
 LINK
 MEMORY=64k
 ADDRESS=0D0000h|0E0000h
 MEMTYPE=OTHER
 INIT=JUMPER(3) LOC(2-1) 11|01