BOARD			; 12/05 fcm Chg 12/19 KN
 ID="ISAC301"
 NAME="BlueLynx 5250"
 MFR="BlueLynx"
 CATEGORY="COM"
 SLOT=ISA8
 LENGTH=135

 HELP="Use the V)iew D)etail by Slot mode to see allocation of Resources
by Function. Use E)dit Change F)unction to select OptioJ×."

ÿÿITCH(1ÿÿ8
 NAÿÿ="SW1"
 STYPE=DIP
 VERTICAL=YES
 REVERSE=YES
 INITVAL=LOC(5-7) 000
 COMMENTS="SW1 uses switch no. 1 and 2 for setting communications type
 (Async/Sync), switch no. 3, 4, and 8 for DMA channel, and switch no. 5-7
 should be set to OFF."

SWITCH(2)=10
 NAME="SW2"
 STYPE=DIP
 VERTICAL=YES
 REVERSE=YES
 COMMENTS="SW2 uses switch no. 1, 2, and 3 for I/O Ports, switch no. 4 and 5
 for DMA channels, and switch no. 6-10 for Interrupt Level."

SOFTWARE(1)="Be Sure to make the changes in the BlueLynx Software
 Configuration Program to Use the Selected Resource Options: "

FUNCTION="BlueLynx 5250 Communications"
 TYPE="COM"
 CHOICE="Available Adapter Options"
 LINK
 PORT=0380h|0384h|0388h|038Ch|0390h|
 0394h|0398h|039Ch
 INIT=SWITCH(2) LOC(1-3)
 111|011|101|001|110|010|001|000
 INIT=SOFTWARE(1)
 "IO380"|"IO384"|"IO388"|"IO38C"|"IO390"|
 "IO394"|"IO398"|"IO39C"
 LINK
 IRQ= 2|3|4|5|7|{}
 INIT=SWITCH(2) LOC(6-10)
 10000|00100|00010|00001|01000|00000 
 INIT=SOFTWARE(1)
 "IRQ2"|"IRQ3"|"IRQ4"|"IRQ5"|"IRQ7"|"No IRQ"
 LINK
 DMA= 1|3|{}
 TIMING=TYPEA
 INIT=SWITCH(1) LOC(3 4 8) 100|010|000 
 INIT=SWITCH(2) LOC(4 5) 01|10|00 
 INIT=SOFTWARE(1)
 "DMA 1"|"DMA 3"|"No DMA"


FUNCTION="BlueLynx 5250 Async/Sync"
 TYPE="COM"
 CHOICE="Synchronous/External Clock"
 FREE
 INIT=SWITCH(1) LOC(1 2) 10
 INIT=SOFTWARE(1) "Sync/External Clock"
 CHOICE="Synchronous/Internal Clock"
 FREE
 INIT=SWITCH(1) LOC(1 2) 01
 INIT=SOFTWARE(1) "Sync/Internal Clock"
 CHOICE="Asynchronous"
 FREE
 INIT=SWITCH(1) LOC(1 2) 00
 INIT=SOFTWARE(1) "Asynchronous"