BOARD			; 12/7 KN New
 ID="ISADE00"
 MFR="QMS"
 NAME="QMS JetScript"
 CATEGORY="OTH"
 SLOT=isa8
 COMMENTS="\nThis Configuration Utility will determine which parallel
port JetScript will take over. Please, IGNORE the choice made by JetScript
Installation Program (JetInstl)."

JUMPER(1)=1
 NAME="J1 Activate Int"
 JTYPE=paired
 VERTICAL=YES
 
JUMPER(2)=2
 NAME="JW1 Interrupt Req"
 JTYPE=inline
 REVERSE=YES
 LABEL=LOC(1^2 2^3) "IRQ7" "IRQ5"
 
 SOFTWARE(1)="\nUse the following information to modify the jumper settings 
and your config.sys (device=[drive]\[path]\JetScrpt.sys -Px -Ix -Lx ):\n"

FUNCTION="QMS JetScript Parallel Port"
 TYPE="PAR"
  CHOICE="LPT1,3BCh,IRQ7"
   SUBTYPE="LPT1"
   LINK
   PORT=03BCh-03BFh
   IRQ=7
   INIT=JUMPER(1) LOC(1) 0
   INIT=JUMPER(2) LOC(1^2 2^3) 10
   INIT=SOFTWARE(1) "-P1 -I1 -L1"
   INIT=SOFTWARE(1) "LPT1,3BCh,IRQ7"
  CHOICE="LPT1,378h,IRQ7"
   SUBTYPE="LPT1"
   LINK
   PORT=0378h-037Fh
   IRQ=7
   INIT=JUMPER(1) LOC(1) 1
   INIT=JUMPER(2) LOC(1^2 2^3) 10
   INIT=SOFTWARE(1) "-P2 -I1 -L1"
   INIT=SOFTWARE(1) "LPT1,378h,IRQ7"
  CHOICE="LPT2,378h,IRQ5"
   SUBTYPE="LPT2"
   LINK
   PORT=0378h-037Fh
   IRQ=5
   INIT=JUMPER(1) LOC(1) 1
   INIT=JUMPER(2) LOC(1^2 2^3) 01
   INIT=SOFTWARE(1) "-P2 -I2 -L2"
   INIT=SOFTWARE(1) "LPT2,378h,IRQ5"
  CHOICE="LPT2,3BCh,IRQ5"
   SUBTYPE="LPT2"
   LINK
   PORT=03BCh-03BFh
   IRQ=5
   INIT=JUMPER(1) LOC(1) 0
   INIT=JUMPER(2) LOC(1^2 2^3) 01
   INIT=SOFTWARE(1) "-P1 -I2 -L2"
   INIT=SOFTWARE(1) "LPT2,3BCh,IRQ5"
  CHOICE="Not Installed"