;-----------------------------------------------------------------------------
; Last Changed 05/12/94 9:03pm By Frank Autenreith
;-----------------------------------------------------------------------------
  BOARD
    ID = "MIC0004"
    NAME = "IBM 486 PCI-EISA System Board"
    MFR = "MICRONICS"
    CATEGORY = "SYS"
    SLOT = EMB(0)
    READID = YES
    SIZING = 0
  SYSTEM
    NONVOLATILE = 8192
    AMPERAGE = 20000
    SLOT(1) = EISA(1)
              LENGTH = 341
              BUSMASTER = YES
    SLOT(2) = EISA(2)
              LENGTH = 341
              BUSMASTER = YES
    SLOT(3) = EISA(3)
              LENGTH = 341
              BUSMASTER = YES
    SLOT(4) = EISA(4)
              LENGTH = 341
              BUSMASTER = YES
    SLOT(5) = EISA(5)
              LENGTH = 341
              BUSMASTER = YES
    SLOT(6) = EISA(6)
              LENGTH = 341
              BUSMASTER = YES

GROUP = "Advanced System Features Setup:"
;-----------------------------------------
; Software Generated NMI Interrupt Control
;-----------------------------------------
  FUNCTION = "Software Generated NMI"
    SHOW = EXP
    HELP = "This item enables or disables software Non-Maskable
            Interrupt (NMI) generation.\n"
    CHOICE = "NMI I/O Port Disabled"
      FREE
        INIT = PORTADR(0461h) BYTE rrrrrr0r
    CHOICE = "NMI I/O Port Enabled"
      FREE
        INIT = PORTADR(0461h) BYTE rrrrrr1r

;------------------------------
; Fail-Safe Timer NMI
;------------------------------
  FUNCTION = "Fail-Safe Timer NMI"
    SHOW = EXP
    HELP = "This item enables or disables fail-safe timer Non-Maskable
            Interrupt (NMI) generation.\n"
    CHOICE = "Fail-Safe NMI Disabled"
      FREE
        INIT = PORTADR(0461h) BYTE rrrrr0rr
    CHOICE = "Fail-Safe NMI Enabled"
      FREE
    INIT = PORTADR(004BH) BYTE 00110010
    INIT = PORTADR(0048H) BYTE 00000000
    INIT = PORTADR(0048H) BYTE 00000000
        INIT = PORTADR(0461h) BYTE rrrrr0rr
        INIT = PORTADR(0461h) BYTE rrrrr1rr

;------------------------------
; Bus-Master Timeout NMI
;------------------------------
  FUNCTION = "Bus-Master Timeout NMI"
    SHOW = EXP
    HELP = "This item enables or disables bus timeout Non-Maskable Interrupt
            (NMI) generation.\n"
    CHOICE = "Disabled"
      FREE
        INIT = PORTADR(0461h) BYTE rrrr0rrr
    CHOICE = "Enabled"
      FREE
        INIT = PORTADR(0461h) BYTE rrrr1rrr

;-------------------------------
; Base Memory Configuration
;-------------------------------
  FUNCTION="System Board Base Memory."
    TYPE="MEM"
    HELP="This is the base memory for the system and is always set to 640k."
    CHOICE="640K base memory (default)"
        HELP="The only choice for the M4PE is 640K."
        LINK
            MEMORY=640K
            ADDRESS=0H
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES

;--------------------------------
; Above 1MB memory configuration
;--------------------------------
  FUNCTION="Total System Board Memory."
    TYPE="MEM"
    HELP="This selection tells the computer the TOTAL amount of memory installed on the system board."
    CHOICE="8MB Total Memory"
       LINK
            MEMORY=7M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="16MB Total Memory"
       LINK
            MEMORY=15M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="24MB Total Memory"
       LINK
            MEMORY=23M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="32MB Total Memory"
       LINK
            MEMORY=31M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="40MB Total Memory"
       LINK
            MEMORY=39M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="48MB Total Memory"
       LINK
            MEMORY=47M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="64MB Total Memory"
       LINK
            MEMORY=63M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="72MB Total Memory"
       LINK
            MEMORY=63M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
       LINK
            MEMORY=8M
            ADDRESS=64M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="80MB Total Memory"
       LINK
            MEMORY=63M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
       LINK
            MEMORY=16M
            ADDRESS=64M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="96MB Total Memory"
       LINK
            MEMORY=63M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
       LINK
            MEMORY=32M
            ADDRESS=64M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
    CHOICE="128MB Total Memory"
       LINK
            MEMORY=63M
            ADDRESS=1M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
       LINK
            MEMORY=64M
            ADDRESS=64M
            WRITABLE=YES
            MEMTYPE=SYS
            CACHE=YES
ENDGROUP

GROUP = "System Board I/O Resource Allocation:"
;-------------------------------------------
;  On Board I/O Setup
;-------------------------------------------

  FUNCTION = "Serial Port A Resource Allocation"
    TYPE = ""
    HELP = "This section will mask out used system resources."
    CHOICE = "COM1 OR COM3 - Enabled"
     FREE
      IRQ=4
    CHOICE = "COM1 AND COM3 - Disabled"
      DISABLE = YES

  FUNCTION = "Serial Port B Resource Allocation"
    TYPE = ""
    HELP = "This section will mask out used system resources."
    CHOICE = "COM2 OR COM4 - Enabled"
     FREE
      IRQ=3
    CHOICE = "COM2 AND COM4 - Disabled"
      DISABLE = YES

  FUNCTION = "Parallel Port Resource Allocation"
    TYPE = ""
    HELP = "This section will mask out used system resources."
    CHOICE = "LPT1 OR LPT2 Enabled At IRQ7"
     FREE
      IRQ=7
    CHOICE = "LPT1 OR LPT2 Enabled At IRQ5"
     FREE
      IRQ=5
    CHOICE = "LPT - Disabled"
      DISABLE = YES

  FUNCTION = "Floppy Resource Allocation"
    TYPE = ""
    HELP = "This section will mask out used system resources."
    CHOICE = "Floppy Controller - Enabled"
     FREE
      IRQ=6
    CHOICE = "Floppy Controller - Disabled"
      DISABLE = YES

  FUNCTION = "Primary IDE Resource Allocation"
    TYPE = ""
    HELP = "This section will mask out used system resources."
    CHOICE = "Primary IDE - Enabled"
     FREE
      IRQ=15
    CHOICE = "Primary IDE - Disabled"
      DISABLE = YES

  FUNCTION = "Secondary IDE Resource Allocation"
    TYPE = ""
    HELP = "This section will mask out used system resources."
    CHOICE = "Secondary IDE - Enabled"
     FREE
      IRQ=14
    CHOICE = "Secondary IDE - Disabled"
      DISABLE = YES
ENDGROUP