;
;12/90 dmw new  
;5/16/91 iyw revised
;6/17/91 iyw revised
;
BOARD
 ID="TCM5070"
 NAME="3COM 3C507 Etherlink 16 or TP v2.0"
 MFR="3COM"
 CATEGORY="NET"
 SLOT= ISA8OR16
 LENGTH=230
 COMMENTS="The EtherLink 16 or EtherLink 16 TP adapter may be connected to an
   Ethernet 802.3 network using an on-board (BNC or RJ45) or external (AUI)
   transceiver.  For the EtherLink 16 or EtherLink 16 TP, use the EtherDisk
   to configure the adapter.  Refer to the EtherLink 16 Installation and
   Configuration Guide or the EtherLink 16 TP Installation Guide if any problems
   are encountered."

 SOFTWARE(1) ="
   Be sure to configure this adapter using EtherDisk for EtherLink 16 and
   EtherLink 16 TP (program name: 3C507.EXE or 3C507TP.EXE).\n
   The appropriate software drivers, from EtherDisk must be copied to
   either the network operating system boot disk or hard drive depending
   on your system's setup.\n
   Configure the adapter with settings: I/O Base Address = w, Interrupt Level
   = x, RAM Base Address = y1, RAM Size = y2, ROM Base Address = z1,
   ROM Size = z2,  where 
   \n"

FUNCTION="3C507 Configuration Options"
 TYPE="NET"

SUBFUNCTION="I/O Addresses"
  CHOICE="300-30F"
    LINK
    PORT=300h-30Fh
    INIT=SOFTWARE(1) "\tw=300"
  CHOICE="310-31F"
    LINK
    PORT=310h-31Fh
    INIT=SOFTWARE(1) "\tw=310"
  CHOICE="320-32F"
    LINK
    PORT=320h-32Fh
    INIT=SOFTWARE(1) "\tw=320"
  CHOICE="330-33F"
    LINK
    PORT=330h-33Fh
    INIT=SOFTWARE(1) "\tw=330"
  CHOICE="340-34F"
    LINK
    PORT=340h-34Fh
    INIT=SOFTWARE(1) "\tw=340"
  CHOICE="350-35F"
    LINK
    PORT=350h-35Fh
    INIT=SOFTWARE(1) "\tw=350"
  CHOICE="360-36F"
    LINK
    PORT=360h-36Fh
    INIT=SOFTWARE(1) "\tw=360"
  CHOICE="380-38F"
    LINK
    PORT=380h-38Fh
    INIT=SOFTWARE(1) "\tw=380"
  CHOICE="390-39F"
    LINK
    PORT=390h-39Fh
    INIT=SOFTWARE(1) "\tw=390"
  CHOICE="3A0-3AF"
    LINK
    PORT=3A0h-3AFh
    INIT=SOFTWARE(1) "\tw=3A0"
  CHOICE="3E0-3EF"
    LINK
    PORT=3E0h-3EFh
    INIT=SOFTWARE(1) "\tw=3E0"
  CHOICE="200-20F"
    LINK
    PORT=200h-20Fh
    INIT=SOFTWARE(1) "\tw=200"
  CHOICE="210-21F"
    LINK
    PORT=210h-21Fh
    INIT=SOFTWARE(1) "\tw=210"
  CHOICE="220-22F"
    LINK
    PORT=220h-22Fh
    INIT=SOFTWARE(1) "\tw=220"
  CHOICE="230-23F"
    LINK
    PORT=230h-23Fh
    INIT=SOFTWARE(1) "\tw=230"
  CHOICE="240-24F"
    LINK
    PORT=240h-24Fh
    INIT=SOFTWARE(1) "\tw=240"
  CHOICE="250-25F"
    LINK
    PORT=250h-25Fh
    INIT=SOFTWARE(1) "\tw=250"
  CHOICE="260-26F"
    LINK
    PORT=260h-26Fh
    INIT=SOFTWARE(1) "\tw=260"
  CHOICE="280-28F"
    LINK
    PORT=280h-28Fh
    INIT=SOFTWARE(1) "\tw=280"
  CHOICE="290-29F"
    LINK
    PORT=290h-29Fh
    INIT=SOFTWARE(1) "\tw=290"
  CHOICE="2A0-2AF"
    LINK
    PORT=2A0h-2AFh
    INIT=SOFTWARE(1) "\tw=2A0"
  CHOICE="2B0-2BF"
    LINK
    PORT=2B0h-2BFh
    INIT=SOFTWARE(1) "\tw=2B0"
  CHOICE="2C0-2CF"
    LINK
    PORT=2C0h-2CFh
    INIT=SOFTWARE(1) "\tw=2C0"
  CHOICE="2D0-2DF"
    LINK
    PORT=2D0h-2DFh
    INIT=SOFTWARE(1) "\tw=2D0"
  CHOICE="2E0-2EF"
    LINK
    PORT=2E0h-2EFh
    INIT=SOFTWARE(1) "\tw=2E0"

SUBFUNCTION="Interrupt Level"
  CHOICE="IRQ 3"
    LINK
    IRQ=3
    INIT=SOFTWARE(1) "\tx=3"
  CHOICE="IRQ 5"
    LINK
    IRQ=5
    INIT=SOFTWARE(1) "\tx=5"
  CHOICE="IRQ 7"
    LINK
    IRQ=7
    INIT=SOFTWARE(1) "\tx=7"
  CHOICE="IRQ 9"
    LINK
    IRQ=9
    INIT=SOFTWARE(1) "\tx=9"
  CHOICE="IRQ 10"
    LINK
    IRQ=10
    INIT=SOFTWARE(1) "\tx=10"
  CHOICE="IRQ 11"
    LINK
    IRQ=11
    INIT=SOFTWARE(1) "\tx=11"
  CHOICE="IRQ 12"
    LINK
    IRQ=12
    INIT=SOFTWARE(1) "\tx=12"
  CHOICE="IRQ 15"
    LINK
    IRQ=15
    INIT=SOFTWARE(1) "\tx=15"

SUBFUNCTION="RAM Base Address"
  CHOICE="D0000" 
    COMBINE	      
    MEMORY = 64K|48K|32K|16K
    ADDRESS = 0D0000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=D0000, y2=64K"|"\ty1=D0000, y2=48K"|"\ty1=D0000, y2=32K"|
    "\ty1=D0000, y2=16K"
  CHOICE="C8000" 
    COMBINE	      
    MEMORY = 64K|48K|32K|16K
    ADDRESS = 0C8000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=C8000, y2=64K"|"\ty1=C8000, y2=48K"|"\ty1=C8000, y2=32K"|
    "\ty1=C8000, y2=16K"
  CHOICE="D8000" 
    COMBINE	      
    MEMORY = 32K|16K
    ADDRESS = 0D8000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=D8000, y2=32K"|"\ty1=D8000, y2=16K"
  CHOICE="C0000" 
    COMBINE	      
    MEMORY = 64K|48K|32K|16K
    ADDRESS = 0C0000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=C0000, y2=64K"|"\ty1=C0000, y2=48K"|"\ty1=C0000, y2=32K"|
    "\ty1=C0000, y2=16K"
  CHOICE="F00000" 
    LINK	      
    MEMORY = 64K
    ADDRESS = 0F00000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=F00000, y2=64K"
  CHOICE="F20000" 
    LINK	      
    MEMORY = 64K
    ADDRESS = 0F20000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=F20000, y2=64K"
  CHOICE="F40000" 
    LINK	      
    MEMORY = 64K
    ADDRESS = 0F40000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=F40000, y2=64K"
  CHOICE="F60000" 
    LINK	      
    MEMORY = 64K
    ADDRESS = 0F60000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=F60000, y2=64K"
  CHOICE="F80000" 
    LINK	      
    MEMORY = 64K
    ADDRESS = 0F80000h
    MEMTYPE = OTH
    INIT=SOFTWARE(1) 
    "\ty1=F80000, y2=64K"

SUBFUNCTION="Boot PROM"
 CHOICE="Disabled"
    LINK
    MEMORY=00K
    ADDRESS=0C8000h
    INIT=SOFTWARE(1) "\tz1=C8000, z2=0"
 CHOICE="Enabled"
    COMBINE
    MEMORY=08K|16K|32K
    ADDRESS=0C6000h-0DE000h STEP=2000h
    MEMTYPE=OTH
    WRITABLE=NO
    INIT=SOFTWARE(1) 
    "\tz1=C6000, z2=8K"|"\tz1=C8000, z2=8K"|"\tz1=CA000, z2=8K"|
    "\tz1=CC000, z2=8K"|"\tz1=CE000, z2=8K"|"\tz1=D0000, z2=8K"|
    "\tz1=D2000, z2=8K"|"\tz1=D4000, z2=8K"|"\tz1=D6000, z2=8K"|
    "\tz1=D8000, z2=8K"|"\tz1=DA000, z2=8K"|"\tz1=DC000, z2=8K"|
    "\tz1=DE000, z2=8K"|
    "\tz1=C6000, z2=16K"|"\tz1=C8000, z2=16K"|"\tz1=CA000, z2=16K"|
    "\tz1=CC000, z2=16K"|"\tz1=CE000, z2=16K"|"\tz1=D0000, z2=16K"|
    "\tz1=D2000, z2=16K"|"\tz1=D4000, z2=16K"|"\tz1=D6000, z2=16K"|
    "\tz1=D8000, z2=16K"|"\tz1=DA000, z2=16K"|"\tz1=DC000, z2=16K"|
    "\tz1=DE000, z2=16K"|
    "\tz1=C6000, z2=32K"|"\tz1=C8000, z2=32K"|"\tz1=CA000, z2=32K"|
    "\tz1=CC000, z2=32K"|"\tz1=CE000, z2=32K"|"\tz1=D0000, z2=32K"|
    "\tz1=D2000, z2=32K"|"\tz1=D4000, z2=32K"|"\tz1=D6000, z2=32K"|
    "\tz1=D8000, z2=32K"|"\tz1=DA000, z2=32K"|"\tz1=DC000, z2=32K"|
    "\tz1=DE000, z2=32K"

; %VER EL16 EISA Configuration File for EDI v2.0b