; Western Digital WD8003WT Twisted Pair ISA file for Compaq
; Version 1.0b
;
; $Header: Q:/src/isa/vcs/wdc03e3.cfv 1.2 23 Jun 1989 9:07:40 mary $
;
; Board Identification Block
BOARD 
 ID="WDC03E3" ; char a=vendor, hex x=prod, hex y=rev-> SAME AS CFG FILE
 NAME="Western Digital EtherCard PLUS TP 8003WT" ; 60 chars max, 31 visible in ISAC
 MFR="Western Digital" ; only 13 chars visible in ISA CONFIG UTILITY
 CATEGORY="NET" ; Network board
 SLOT=ISA8 ; 8 bit board
 LENGTH=340 ; 13.3 inches

; Initialization Information Block

; Baseio
JUMPER(1)=5
 NAME="W1"
 JTYPE=PAIRED
 VERTICAL=NO
 LABEL=LOC(5-1) " "" "" "" "" "
 FACTORY=LOC(5-1) 01101
 COMMENTS="The first four jumpers on the left form the
 Base I/O Address. The right most jumper is for
 wait state selection. See Installation Guide 
 for information about selecting the wait state."

; IRQ
JUMPER(2)=6
 NAME="W2"
 JTYPE=PAIRED ; double row of "posts"
 VERTICAL=YES
 LABEL=LOC(6-1) " "" "" "" "" "" "
 FACTORY=LOC(6-1) 000010 ; IRQ3

; ROM BASE ADDRESS
JUMPER(3)=5
 NAME="W6"
 JTYPE=PAIRED ; double row of "posts"
 VERTICAL=NO
 LABEL=LOC(5-1) " "" "" "" "" "
 FACTORY=LOC(5-1) 11110
 COMMENTS="This jumper sets the ROM base address."

;ROM SIZE
JUMPER(4)=2
 NAME="W9"
 JTYPE=INLINE ; double row of "posts"
 VERTICAL=NO 
 LABEL=LOC(3^2 2^1) " "" "
 FACTORY=LOC(3^2 2^1) 10
 COMMENTS="This jumper sets the ROM size."

;ROM SIZE
JUMPER(5)=2
 NAME="W10"
 JTYPE=INLINE ; double row of "posts"
 VERTICAL=NO 
 LABEL=LOC(3^2 2^1) " "" "
 FACTORY=LOC(3^2 2^1) 10
 COMMENTS="This jumper sets the ROM size."

;RAM SIZE
JUMPER(6)=2
 NAME="W7"
 JTYPE=INLINE
 VERTICAL=YES
 LABEL=LOC(3^2 2^1) " "" "
 FACTORY=LOC(3^2 2^1) 01
 COMMENTS="This jumper sets the RAM size."

;RAM SIZE
JUMPER(7)=2
 NAME="W8"
 JTYPE=INLINE
 VERTICAL=YES
 LABEL=LOC(3^2 2^1) " "" "
 FACTORY=LOC(3^2 2^1) 01
 COMMENTS="This jumper sets the RAM size."

;RAM SIZE
JUMPER(8)=2
 NAME="W11"
 JTYPE=INLINE
 VERTICAL=YES
 LABEL=LOC(3^2 2^1) " "" "
 FACTORY=LOC(3^2 2^1) 01
 COMMENTS="This jumper sets the RAM size."

;NETWORK TYPE
JUMPER(9)=6
 NAME="W3"
 JTYPE=PAIRED
 VERTICAL=YES
 LABEL=LOC(6-1) " "" "" "" "" "" "
 FACTORY=LOC(6-1) 111111
 COMMENTS="This jumper sets type of network connection desired."

SOFTWARE(1)="Run the SETUP program to set up the board as configured.\n
 NOTE:The RAM buffer base address is set by your network software
 package, not by jumpers. Consult your WD User Installation 
 Guide or the documentation provided with your software 
 for instructions."

 
;Function Statement Block

FUNCTION="Shared RAM"
 TYPE="NET"
 CHOICE="8K RAM"
 LINK
 MEMORY=8K
 ADDRESS=0D0000H|0C0000H|0C2000H|0C8000H |
 0CA000H|0D2000H|0D8000H|0DA000H 
 MEMTYPE=OTHER
 FREE
 INIT=JUMPER(6) LOC(3^2 2^1) 01
 INIT=JUMPER(7) LOC(3^2 2^1) 01
 INIT=JUMPER(8) LOC(3^2 2^1) 01
 INIT=SOFTWARE(1) ""
 CHOICE="32K RAM"
 LINK
 MEMORY=32K
 ADDRESS=0D0000H|0C0000H|0C8000H|0D8000H 
 MEMTYPE=OTHER
 FREE
 INIT=JUMPER(6) LOC(3^2 2^1) 10
 INIT=JUMPER(7) LOC(3^2 2^1) 10
 INIT=JUMPER(8) LOC(3^2 2^1) 10
 INIT=SOFTWARE(1) ""

FUNCTION="Base I/O Address"
 TYPE="NET"
 CHOICE=""
 LINK 
 PORT=280h-29Fh|200h-21Fh|220h-23Fh|240h-25Fh|
 260h-27Fh|2A0h-2BFh|2C0h-2DFh|2E0h-2FFh |
 300h-31Fh|320h-33Fh|340h-35Fh|360h-37Fh |
 380h-39Fh|3A0h-3BFh|3C0h-3DFh|3E0h-3FFh 

 INIT=JUMPER(1) LOC(5-1)
 10110|11110|11100|11010 |
 11000|10100|10010|10000 |
 01110|01100|01010|01000 |
 00110|00100|00010|00000 

FUNCTION="Interrupt (IRQ)"
 TYPE="NET"
 CHOICE=""
 LINK
 IRQ = 3|2|4|
 5|6|7
 INIT=JUMPER(2) LOC(6-1) 
 000010|000001|000100|
 001000|010000|100000 

FUNCTION="Network Connector" 
 TYPE="NET"
 CHOICE="RJ-45/Twisted Pair" 
 FREE
 INIT=JUMPER(9) LOC(6-1) 111111
 CHOICE="AUI/Standard Ethernet"
 FREE
 INIT=JUMPER(9) LOC(6-1) 000000

FUNCTION="Optional ROM"
 TYPE="NET"
 CHOICE="ROM Disabled"
 FREE
 INIT=JUMPER(3) LOC(5-1) 11110
 INIT=JUMPER(4) LOC(3^2 2^1) 10
 INIT=JUMPER(5) LOC(3^2 2^1) 10
 
 CHOICE="16K ROM Enabled"
 LINK
 MEMORY=16K
 ADDRESS=0D8000H|0C0000H|0C4000H|0C8000H |
 0CC000H|0D0000H|0D4000H|0DC000H 
 WRITABLE=NO
 MEMTYPE=OTHER 
 INIT= JUMPER(3) LOC(5-1) 
 00110|00000|00001|00010 |
 00011|00100|00101|00111
 FREE
 INIT=JUMPER(4) LOC(3^2 2^1) 10
 INIT=JUMPER(5) LOC(3^2 2^1) 10

 CHOICE="32K ROM Enabled"
 LINK
 MEMORY=32K
 ADDRESS=0D8000H|0C0000H|0C8000H|0D0000H
 WRITABLE=NO
 MEMTYPE=OTHER 
 INIT= JUMPER(3) LOC(5-1) 
 01110|01000|01010|01100 
 FREE
 INIT=JUMPER(4) LOC(3^2 2^1) 10
 INIT=JUMPER(5) LOC(3^2 2^1) 01


 CHOICE="64K ROM Enabled"
 LINK
 MEMORY=64K
 ADDRESS= 0D0000H|0C0000H 
 WRITABLE=NO
 MEMTYPE=OTHER 
 INIT= JUMPER(3) LOC(5-1) 
 10100|10000

 FREE
 INIT=JUMPER(4) LOC(3^2 2^1) 01
 INIT=JUMPER(5) LOC(3^2 2^1) 01