BOARD
ID="10000003"
NAME="Compaq 32-Bit Fast-Wide SCSI-2/P Controller"
MFR="Compaq"
CATEGORY="MSD"
SLOT=PCI
READID=NO

IOPORT(1)=PCI(0DCh) SIZE=BYTE INITVAL=xxxx0xxx
IOPORT(2)=PCI(0DDh) SIZE=BYTE INITVAL=x010x011
IOPORT(3)=PCI(0DEh) SIZE=BYTE INITVAL=0xxxxxxx
IOPORT(4)=PCI(0DFh) SIZE=BYTE INITVAL=xxxxxxxx

FUNCTION="SCSI Resources"
CHOICE=""

INCLUDE="CPQ4400.OVL"

BEGINOVL

FUNCTION="Controller Order"
HELP="When adding a controller to a configured system, you can
either place it at the end of the controller order or reorder
the controllers.  Reordering changes the current drive letter
assignments for all drives on the system. To avoid changing
the drive letter assignments when you add a controller to a
configured system, place it at the end of the controller
order and DO NOT CREATE A PRIMARY PARTITION on any of the
added disks."
RESOURCE="CNTRORD",UNIQUE
CHOICE="First"
 LINK
 MEMBER="CNTRORD","1"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0000
CHOICE="Second"
 LINK
 MEMBER="CNTRORD","2"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0001
CHOICE="Third"
 LINK
 MEMBER="CNTRORD","3"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0010
CHOICE="Fourth"
 LINK
 MEMBER="CNTRORD","4"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0011
CHOICE="Fifth"
 LINK
 MEMBER="CNTRORD","5"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0100
CHOICE="Sixth"
 LINK
 MEMBER="CNTRORD","6"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0101
CHOICE="Seventh"
 LINK
 MEMBER="CNTRORD","7"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0110
CHOICE="Eighth"
 LINK
 MEMBER="CNTRORD","8"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 0111
CHOICE="Ninth"
 LINK
 MEMBER="CNTRORD","9"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 1000
CHOICE="Tenth"
 LINK
 MEMBER="CNTRORD","A"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 1001
CHOICE="Eleventh"
 LINK
 MEMBER="CNTRORD","B"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 1010
CHOICE="Twelfth"
 LINK
 MEMBER="CNTRORD","C"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 1011
CHOICE="Thirteenth"
 LINK
 MEMBER="CNTRORD","D"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 1100
CHOICE="Fourteenth"
 LINK
 MEMBER="CNTRORD","E"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 1101
CHOICE="Fifteenth"
 LINK
 MEMBER="CNTRORD","F"
 SHARE=NO
 INIT=IOPORT(3)LOC(3 2 1 0) 1110
CHOICE="Disabled"

FUNCTION="Host Adapter Number"
HELP="This function allows the Unix user to
select the controller's host adapter number
for use when manually configuring devices."
;!#1 RESOURCE="HA710",UNIQUE
CHOICE="0"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 000
;!#1  MEMBER="HA710","1" SHARE=NO
CHOICE="1"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 001
;!#1  MEMBER="HA710","2" SHARE=NO
CHOICE="2"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 010
;!#1  MEMBER="HA710","3" SHARE=NO
CHOICE="3"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 011
;!#1  MEMBER="HA710","4" SHARE=NO
CHOICE="4"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 100
;!#1  MEMBER="HA710","5" SHARE=NO
CHOICE="5"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 101
;!#1  MEMBER="HA710","6" SHARE=NO
CHOICE="6"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 110
;!#1  MEMBER="HA710","7" SHARE=NO
CHOICE="7"
LINK
 INIT=IOPORT(3)LOC(6 5 4) 111
;!#1  MEMBER="HA710","8" SHARE=NO
CHOICE="Disabled"                 ;!#1

FUNCTION="" SHOW=NO CHOICE=""
 LINK
 INIT=IOPORT(2)LOC(7) 0-1

FUNCTION="SCSI ID"
 SHOW=NO
 CHOICE="# 7" LINK INIT=IOPORT(1)LOC(2 1 0) 111

FUNCTION="I2C"
SHOW=NO
CHOICE=""
LINK
 INIT=IOPORT(2)LOC(3) 0-1

FUNCTION="Bus Speed"
HELP="CAUTION: This function allows the user to manually
select the SCSI bus data transfer speed used by the device driver.
Selecting an improper transfer speed may cause data errors and/or
affect performance."
CHOICE="SCSI-2 Compliant" LINK INIT=IOPORT(1)LOC(7 6 5 4) 1010
CHOICE="SCSI-1 Compliant" LINK INIT=IOPORT(1)LOC(7 6 5 4) 0101
CHOICE="Asynchronous" LINK INIT=IOPORT(1)LOC(7 6 5 4) 0000

GROUP="Attached Devices"
FUNCTION="SCSI ID 0"
CHOICE=""
FUNCTION="SCSI ID 1"
CHOICE=""
FUNCTION="SCSI ID 2"
CHOICE=""
FUNCTION="SCSI ID 3"
CHOICE=""
FUNCTION="SCSI ID 4"
CHOICE=""
FUNCTION="SCSI ID 5"
CHOICE=""
FUNCTION="SCSI ID 6"
CHOICE=""
FUNCTION="SCSI ID 7"
CHOICE=""
ENDGROUP

FUNCTION=""
 TYPE = "MSD,SCSI,DEVLIST"
 SHOW=NO
CHOICE=""
 LINK
 INIT=IOPORT(4) 00000000b - 11111111b

FUNCTION="BIOS Hard Drive Geometry"
 TYPE="CPQGEO"
 SHOW=EXP
 HELP="This item is used to set the hard drive geometry used by the
controller firmware. A default is chosen based on the selected OS.
This default should not be changed without a complete understanding
of how the system will be affected. Changing this item could make data
on existing drives unreadable."
CHOICE="Always 64 Heads, 32 Sectors"
 SUBTYPE="A"
 FREE MEMORY={}|2K ADDRESS=1024M-3096M STEP=128M SHARE="B_BUCKET" MEMTYPE=VIR
CHOICE="<=1GB:  64 Heads, 32 Sectors       > 1GB:  255 Heads, 63 Sectors"
 SUBTYPE="B"
 FREE MEMORY={}|2K ADDRESS=1024M-3096M STEP=128M SHARE="B_BUCKET" MEMTYPE=VIR
CHOICE="Always 255 Heads, 63 Sectors"
 SUBTYPE="C"
 FREE MEMORY={}|2K ADDRESS=1024M-3096M STEP=128M SHARE="B_BUCKET" MEMTYPE=VIR

ENDOVL