BOARD
ID="10140022"
NAME="Compaq SMART-2/P Array Controller"
MFR="Compaq"
CATEGORY="MSD"
SLOT=PCI
READID=NO

FUNCTION="Controller Resources"
CHOICE=""

INCLUDE="CPQ4030.OVL"
BEGINOVL

FUNCTION="Controller Order"
HELP="When adding a controller to a configured system, you can
either place it at the end of the controller order or reorder
the controllers.  Reordering changes the current drive letter
assignments for all drives on the system. To avoid changing
the drive letter assignments when you add a controller to a
configured system, place it at the end of the controller
order and DO NOT CREATE A PRIMARY PARTITION on any of the
added disks."
RESOURCE="CNTRORD",UNIQUE
CHOICE="First"
  SUBTYPE="MSD,DSKCTL;CTL1" LINK MEMBER="CNTRORD","1" SHARE=NO
CHOICE="Second"
  SUBTYPE="MSD,DSKCTL;CTL2" LINK MEMBER="CNTRORD","2" SHARE=NO
CHOICE="Third"
  SUBTYPE="MSD,DSKCTL;CTL3" LINK MEMBER="CNTRORD","3" SHARE=NO
CHOICE="Fourth"
  SUBTYPE="MSD,DSKCTL;CTL4" LINK MEMBER="CNTRORD","4" SHARE=NO
CHOICE="Fifth"
  SUBTYPE="MSD,DSKCTL;CTL5" LINK MEMBER="CNTRORD","5" SHARE=NO
CHOICE="Sixth"
  SUBTYPE="MSD,DSKCTL;CTL6" LINK MEMBER="CNTRORD","6" SHARE=NO
CHOICE="Seventh"
  SUBTYPE="MSD,DSKCTL;CTL7" LINK MEMBER="CNTRORD","7" SHARE=NO
CHOICE="Eighth"
  SUBTYPE="MSD,DSKCTL;CTL8" LINK MEMBER="CNTRORD","8" SHARE=NO
CHOICE="Ninth"
  SUBTYPE="MSD,DSKCTL;CTL9" LINK MEMBER="CNTRORD","9" SHARE=NO
CHOICE="Tenth"
  SUBTYPE="MSD,DSKCTL;CTL10" LINK MEMBER="CNTRORD","A" SHARE=NO
CHOICE="Eleventh"
  SUBTYPE="MSD,DSKCTL;CTL11" LINK MEMBER="CNTRORD","B" SHARE=NO
CHOICE="Twelfth"
  SUBTYPE="MSD,DSKCTL;CTL12" LINK MEMBER="CNTRORD","C" SHARE=NO
CHOICE="Thirteenth"
  SUBTYPE="MSD,DSKCTL;CTL13" LINK MEMBER="CNTRORD","D" SHARE=NO
CHOICE="Fourteenth"
  SUBTYPE="MSD,DSKCTL;CTL14" LINK MEMBER="CNTRORD","E" SHARE=NO
CHOICE="Fifteenth"
  SUBTYPE="MSD,DSKCTL;CTL15" LINK MEMBER="CNTRORD","F" SHARE=NO

; Dummy functions to keep indeces to the PCI and EISA board functions in sync.

FUNCTION=""
SHOW=NO
CHOICE=""

FUNCTION=""
SHOW=NO
CHOICE=""

; Function contains free-form controller id.
FUNCTION="Online Recovery Server Status"
TYPE="MSD,DSKCTL;CTLID"
HELP="This function indicates if this controller is able to partcipate
in Online Recovery. A primary controller controls the local storage device,
while a recovery controller is able to adopt a storage device from another
system which has had an online recovery event occur."
CHOICE="Disabled"
CHOICE="Primary"
CHOICE="Recovery"

FUNCTION="Drive Characteristics"
CHOICE="View with Compaq Array Configuration Utility"

FUNCTION=""
SHOW=NO
CHOICE=""

FUNCTION="SCSI Bus Speed"
SHOW=EXP
HELP="This function is for selecting the SCSI bus speed. However, the 
selection is only valid when there are drives attached to the controller
and the drives have been configured with Compaq Array Configuration utility"
 
CHOICE="Auto-detection"
CHOICE="Max Speed Possible"
CHOICE="SCSI-2 Compliant"
CHOICE="Asynchronous"

FUNCTION="Cache Size"
;SHOW=NO
CHOICE=""

FUNCTION="Firmware Revision"
CHOICE=""

ENDOVL