Article: Q27835
Product(s): Microsoft Macro Assembler
Version(s): 5.0,5.1,5.1a
Operating System(s):
Keyword(s):
Last Modified: 06-MAY-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Macro Assembler (MASM), versions 5.0, 5.1, 5.1a
-------------------------------------------------------------------------------
SYMPTOMS
========
When using scaled indexed addressing in the following Microsoft Macro Assembler
(MASM) 5.0, 5.1, or 5.1a instruction, the opcode generated is incorrect. Note
that the variable "esi" is being used as an index into a structure and "eax" is
the base.
mov eax,[eax.esi*2]
The opcodes generated by MASM indicate that MASM is not using scaled indexed
addressing. The code generated by MASM is effectively the same as:
mov eax,[eax+esi]
CAUSE
=====
The problem occurs because the "." operator has a higher precedence than the "*"
operator. MASM turns:
[eax.esi*2]
into
[(eax+esi)*2]
as a result of the precedence. MASM evaluates "(eax+esi)" as a constant instead
of a register. Thus, the result of the constant expression "(eax+esi)" is
multiplied by two and the addressing mode is lost. This results in MASM
interpretting the operand as [eax+esi]
RESOLUTION
==========
One workaround is to use the "+" operator which has lower precedence than the
"." operator and produces the correct result. Alternately parenthesis can be
used to give higher precedence to the "*" operator.
STATUS
======
Microsoft has confirmed this to be a problem in MASM version 5.0, 5.1, and 5.1a.
This problem was corrected in MASM version 6.0.
MORE INFORMATION
================
Under Microsoft MASM 6.0 the following error will be generated.
error A2026: constant expected
Sample Code
-----------
; Assemble options needed: none
.386
_TEXT SEGMENT PARA PUBLIC USE16 'CODE'
ASSUME cs:_TEXT
start:
mov eax,[eax+esi*2] ; This is the desired instruction
; Note the use of "+" instead of "."
mov eax,[eax.(esi*2)] ; This is also the desired instruction
; Note the use of () around the "*"
mov eax,[eax.esi*2] ; This is the format that is misinterpreted
; Under MASM 6.0 this generates an A2026
mov eax,[eax+esi] ; This is what is incorrectly generated
; by MASM 5.0, 5.1, and 5.1a
mov ax, 4C00h
int 21h
_TEXT ENDS
END start
Additional query words: 5.00 5.10 5.10a buglist5.00 buglist5.10 buglist5.10a fixlist6.00
======================================================================
Keywords :
Technology : kbMASMsearch kbAudDeveloper kbMASM510 kbMASM500 kbMASM510a
Version : :5.0,5.1,5.1a
Solution Type : kbfix
=============================================================================