Article: Q69195
Product(s): Microsoft Windows 95.x Retail Product
Version(s): WINDOWS:3.0,3.0a,3.1,3.11
Operating System(s):
Keyword(s):
Last Modified: 01-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11
- Microsoft Windows for Workgroups versions 3.1, 3.11
-------------------------------------------------------------------------------
SUMMARY
=======
Some Leading Edge Computers (Model D3/SX) contain a built-in proprietary mouse
port. To use a Microsoft serial mouse on a serial communications port, instead
of using Leading Edge's mouse, you must disable the built-in mouse port.
MORE INFORMATION
================
Steps to Setup Microsoft Serial Mouse
-------------------------------------
1. Disable the built-in mouse port by moving jumper 15 on the motherboard from
pins 1 and 2 to 2 and 3.
2. Connect the serial mouse to COM1 or COMx, where x is the COM port of your
choice.
3. Check to ensure Windows is configured for the appropriate mouse driver
(Microsoft or IBM PS/2 for example).
NOTE: There have been no reported problems with the Microsoft Bus Mouse
conflicting with the built-in mouse port.
Additional query words:
======================================================================
Keywords :
Technology : kbAudDeveloper kbWin3xSearch kbWFWSearch kbZNotKeyword3 kbWin300 kbWin300a kbWin310 kbWin311 kbWFW310 kbWFW311
Version : WINDOWS:3.0,3.0a,3.1,3.11
=============================================================================