Article: Q74249
Product(s): Microsoft Windows 95.x Retail Product
Version(s): WINDOWS:3.0,3.0a
Operating System(s):
Keyword(s):
Last Modified: 11-OCT-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows versions 3.0, 3.0a
-------------------------------------------------------------------------------
SUMMARY
=======
Configuring the Gateway Ethernet network card with certain I/O address settings
may preclude the use of Microsoft Windows. Try setting the I/O address to 2A0h
(default) or 360h.
IRQ settings of 2, 3, 4, 5, 6, 7, 10, 11, 12, and 15 are available on the Gateway
card (the default is IRQ 3). Some of the IRQ options are not valid Novell
NetWare selections.
MORE INFORMATION
================
The I/O base address can be changed according to the following switch setting
chart for SW1:
SWITCH SW1
I/O 1 2 3 4
280h ON ON ON ON
2A0h ON OFF ON ON <-- DEFAULT
2C0h ON ON OFF ON
2E0h ON OFF OFF ON
300h ON ON ON OFF
320h ON OFF ON OFF
340h ON ON OFF OFF
360h ON OFF OFF OFF
NOTE: If an autoboot PROM is installed, use device I/O address 2A0h.
For further information on the Gateway Ethernet network card, contact Gateway
Communications technical support.
Additional query words: 3.00 3.0 3.0a 3.00a hang hangs lock io interrupt win30
======================================================================
Keywords :
Technology : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a
Version : WINDOWS:3.0,3.0a
=============================================================================