Article: Q106272
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.1,3.11
Operating System(s):
Keyword(s):
Last Modified: 25-SEP-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows for Workgroups versions 3.1, 3.11
-------------------------------------------------------------------------------
SYMPTOMS
========
When you attempt to start the network redirector, connect to a network drive,
printer, or any other network device, the following error message may be
displayed:
Network Busy
CAUSE
=====
The "Network Busy" error message is usually caused by some type of hardware
problem; it is rarely caused by the network being busy. Below are the most
common causes of this error message:
- Interrupt (IRQ) conflict
- I/O address conflict
- RAM address conflict
- DMA conflict
- Hub/Concentrator/Bridge/Router problem
- Problem with another computer on the network
- Disconnected or faulty cabling, connectors, or terminators
- Faulty network card (on the local or a remote computer)
- Incorrect Transceiver Type selection
- Duplicate computer name on network
- Incorrect network interface card (NIC) driver
Additional query words: 3.10 3.1 3.11 "the network is busy"
======================================================================
Keywords :
Technology : kbAudDeveloper kbWFWSearch kbWFW310 kbWFW311
Version : WINDOWS:3.1,3.11
=============================================================================