Article: Q122159
Product(s): Microsoft Disk Operating System
Version(s): MS-DOS:6.22
Operating System(s):
Keyword(s):
Last Modified: 22-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft MS-DOS operating system version 6.22
-------------------------------------------------------------------------------
SYMPTOMS
========
The following error is displayed when you run Setup on a system with a SCSI
device that is not a hard disk drive and is set to ID 0 or ID 1:
Setup is unable to identify your hard drive's startup partition.
CAUSE
=====
SCSI ID 0 and ID 1 are reserved for SCSI hard disks. Setup treats devices
mounted as SCSI ID 1 or ID 0 as hard disk devices. The device given ID 0 or ID 1
does not respond as appropriate, generating the above error message.
RESOLUTION
==========
To work around this problem, reconfigure the device to ID 2 or higher and then
rerun Setup.
Additional query words: 6.22 err msg
======================================================================
Keywords :
Technology : kbMSDOSSearch kbMSDOS622
Version : MS-DOS:6.22
=============================================================================