Article: Q122180
Product(s): Microsoft Systems Management Server
Version(s): 1.0,1.1
Operating System(s):
Keyword(s): kbnetwork kbDatabase kbScheduler smsdatabase smsscheduler
Last Modified: 05-FEB-2002
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Systems Management Server versions 1.0, 1.1
-------------------------------------------------------------------------------
This article details Systems Management Server event log codes 250 through
349.
Event Log Codes 250 - 349
-------------------------
Code Description
---- -----------
250 Cannot create new thread. Verify there is enough virtual memory on
the machine.
251 Cannot connect to site A over LAN. Verify the remote site server B
is on the LAN and share C is visible and has all the necessary
permission for the SMS service account. Also verify the network is
not saturated. Verify you can move large amount of data across the
network. Win32Error Code = D.
252 Cannot connect to site A over RAS. Verify the remote site server B
is alive and running RAS Server Serivce, and the phone book entry C
in the default phone book contains valid information Win32 Error
Code = D. Check the RAS section in the NT document for detailed
explanation on the error code.
253 Sender had a successful RAS connection to site A. However it failed
to connect to share B on server C using the given user name and
password. Verify the share permission is set up properly. Win32
Error Code = D
254 Cannot start TP using local LU alias A while establishing a SNA
connection to site B. The primary return code is C, the secondary
return code is D. Verify all the SNA setting are correct through the
SNA Admin.
255 Cannot do a MC_ALLOCATE while establishing a SNA connection to site
A. The primary return code is B, the secondary return code is C.
Verify all the SNA setting are correct through the SNA Admin.
256 Cannot find an active receiver at remote site A to confirm the
connection request. Verify the SNA receiver is running at the remote
site.
257 The X adddress string is invalid. It's missing the remote server
name section.
258 The X adddress string is invalid. It's missing the remote share name
section.
259 The X adddress string is invalid. It's missing the remote gateway
name section.
260 A Sender is starting for send request
261 Incorrect invocation of a sender.
262 Cannot open status file X.
263 Cannot read status file X.
264 No remote addresses in status file X.
265 Connection to remote site failed after retries exceeded. No more
remote addresses in status file X.
266 Remote site installation failed with error X.
267 No errors reported from remote site installation.
268 Cannot locate the package file or it is of zero length. File name X.
269 Cannot locate the instruction file or it is of zero length. File
name X.
270 File X exists.
271 File X exists. It has been renamed.
272 Job X was successfully sent to destination Y.
273 The dispatcher failed to spawn a sender process for send request X.
The system returned the above error code.
274 No remote address present.
275 The remote address is inavlid. Address: X.
276 Local address missing or invalid.
277 Failed to connect to destination X.
278 Failed to disconnect from remote resource X.
279 Failed to connect to RAS Server. Remote resource X. The error code
from RAS is reported above.
280 Failed to open file X.
281 Failed to open file X. LU aliases: Y.
282 Failed to close file X.
283 Failed to close file X. LU aliases: Y.
284 File X is not the expected size.
285 Write to file X failed. The sender failed to confirm that the file
was written to correctly.
286 Failed to flush file X.
287 Failed to flush file X. LU aliases: X.
288 Failed to read file X.
289 Insufficient disk space on X.
290 Insufficient disk space on X. LU aliases: Y.
291 Failed to check the disk space on remote machine X. Possible causes
are: The remote machine is unavailable. Incorrect access rights to
the remote machine.
292 Failed to rename remote file from X to Y.
293 Failed to remove file X.
294 Failed to remove file X. LU aliases: Y.
295 Memory allocation failed.
296 Dispatcher starting.
297 SNA Receiver starting.
298 SNA Receiver stopping.
299 RAS Dispatcher cannot get access to the RAS section of the registry.
300 Dispatcher has terminated.
301 Dispatcher has terminated due to an error.
302 Sender has received a message to stop the current transfer.
303 Sender has received a message to cancel the current transfer.
304 Sender has received a message to suspend the current transfer.
305 Failed to establish connection between local LU X and remote LU Y.
306 The SNA communication with the remote site failed. Local LU alias X,
Remote LU alias Y.
307 The application failed to set a notification event on the above
directory. The API has returned the error code above.
308 The application failed to create a handle. The API has returned the
error code above.
309 Incomplete data. Either the destination site or the instruction type
is missing.
310 Cannot access the registry.
311 Missing in-box path in registry.
312 Failed to construct the instruction file.
313 The package source directory cannot be found.
314 Failed to update the job source.
315 The job handler encountered an error attempting to place the send
request in the unscheduled outbox. Possible causes are: the server
holding the Scheduler's unscheduled outbox is not reachable (server
may be off the network); or there may already be a send request with
the same ID (A) in the unscheduled outbox (should not happen).
316 The job encountered an error while sending data or performing
operations relating to the destination site. Possible causes are: X
addresses to the destination site may be invalid (server or account
information may be incorrect); the destination site server may not
be running; or there may be communications or other sending-related
errors.
317 The job encountered an error while sending a remote cancel
instruction. The job information has already reached the destination
site, requiring a cancel instruction to be sent to that destination
site, informing the site to stop processing the job. Possible causes
are: addresses to the destination site may be invalid (server or
account information may be incorrect); the destination site server
may not be running; or there may be communications or other sending-
related errors.
318 The job cannot access the specified query (A) and therefore cannot
generate the list of target workstations for the job. Possible
causes are: SQL server is not responding; a blank queryname was
specified; or the query was deleted after the job was created.
319 The job encountered an error trying to process the specified machine
path (A) and therefore cannot generate the list of target
workstations for the job. Possible causes are: an invalid site name
or site code was specified (site groups are not allowed); the PC
architecture has not been defined yet; or a fatal low-memory
condition was encountered.
320 The job encountered an error trying to execute a query and there
forecannot generate the list of target workstations for the job.
Possible causes are: SQL server is not available; or a fatal low-
memory condition was encountered.
321 The job encountered an error trying to reach the Job Details table
and therefore cannot generate the list of target workstations for
the job. Possible causes are: SQL Server is not started; SQL Server
logon account is invalid; a named-pipe connection to the server
running SQLServer cannot be established; or the maximum user
connections for SQL Server has been reached.
322 The job encountered an error trying to insert a record into the Job
Details table and therefore cannot generate the list of target
workstations for the job. Possible causes are: SQL server is not
available.
323 The job has been failed without performing any actions, because the
generated list of target workstations was empty. The provided query,
machine group, or machine path, along with any site limiting,
resulted in zero machines being targeted. Therefore, the job has
nothing to do.
324 The job encountered an error trying to generate the list of
destination sites. Possible causes are: SQL server is not available.
325 The job encountered an error trying to reach the Requests table and
therefore cannot be activated. Possible causes are: SQL Server is
not started; SQL Server logon account is invalid; a named-pipe
connection to the server running SQL Server cannot be established;
or the maximum user connections for SQL Server has been reached.
326 The job encountered an error trying to insert a record into the
Requests table and therefore cannot be activated. Possible causes
are: SQL server is not available.
327 The job encountered an error trying to connect to the registry while
updating job status. Job status updating will be skipped for this
cycle.
328 The job encountered an error trying to read the registry while
updating job status. Job status updating will be skipped for this
cycle.
329 An error occured while trying to compress the contents of the source
directory specified for the workstation version of the package.
Possible causes are: the source directory specified is invalid or
cannot be accessed by the compression process; or, there was
insufficient disk space to compress the contents of the source
directory.
330 An error occured while trying to compress the contents of the source
directory specified for the server version of the package. Possible
causes are: the source directory specified is invalid or cannot be
accessed by the compression process; or, there was insufficient disk
space to compress the contents of the source directory.
331 An error occured while trying to compress the source directory or
file associated with the job. Possible causes are: the source
directory or file does not exist orcannot be accessed by the
compression process; or, there was insufficient disk space to
compress the contents of the source directory or file.
332 The system cannot find any defined addresses by which this site can
send to a destination site for the job. Possible causes are: no
addresses have been defined between this site and the destination
site; the SMS site server registry (which holds the address list) is
not active and on the network; or, SMS_SCHEDULER does not have
sufficient rights to access the SMS site server registry.
333 Cannot read registry on Server X. Check for missing SMS keys in
registry.
334 Cannot update Site Table for site X. Check Sites table and SQL
Server.
335 First config job created for site X. %5
336 Cannot read Site Control file for site X from database on SQL
Server Y. Check SQL Server and Site Control table.
337 Cannot write Site Control file for site X to database on SQL Server
Y. Check SQL Server and Site Control table.
338 Cannot write Site Control file to the SITE.SRV\SITECFG.BOX. Check
for directory existence.
339 Site Control file X has bad or unknown type. Check for corrupted
file.
340 Cannot read the Site Control file X. Check for locked or corrupted
file.
341 Site X had bad or unknown status value in Sites table. Check SQL
Tables.
342 Cannot change to working directory X. Check for directory existence.
343 Cannot connect to Job Source [SQL]. Check SQL Server and Jobs table.
344 Cannot insert a job into Job Source [SQL]. Check SQLServer and Jobs
table.
345 Cannot read Job X from SQL tables. Check SQLServer and Jobs table.
346 Cannot generate a new send request for remote site intallation.
347 No address is available to reach site X. Cannot create a job.
348 Remote site install package created. X files copied to make package.
349 Remote site installation sequence started for site X.
Additional query words: sms prodsms
======================================================================
Keywords : kbnetwork kbDatabase kbScheduler smsdatabase smsscheduler
Technology : kbSMSSearch kbSMS100 kbSMS110
Version : :1.0,1.1
=============================================================================