Article: Q127729
Product(s): Microsoft Mail For PC Networks
Version(s): MS-DOS:3.2
Operating System(s):
Keyword(s):
Last Modified: 05-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Mail Gateway to X.400, version 3.2
-------------------------------------------------------------------------------
SUMMARY
=======
The following are examples of the AUTOEXEC.BAT, CONFIG.SYS, and PROTOCOL.INI
files for an X.400 gateway using TP4 as the transport stack. It is assumed that
the gateway computer has a DEC DEPCA Ethernet card in it.
AUTOEXEC.BAT
------------
Prompt $p$g
Echo Off
set path =c:\dos
set tmp =c:\tmp
lh doskey
lh mouse
@REM ==== LANMAN 2.2a ====
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
c:\tp4\drivers\tp4.exe
NET START workstation full
LOAD NETBEUI
NET LOGON
@REM ==== LANMAN 2.2a ====
CONFIG.SYS
----------
device=c:\dos\himem.sys /testmem:off
device=c:\dos\emm386.exe noems /x=D000-DFFF
dos=high,umb
files=30
shell=c:\dos\command.com c:\dos\ /p
LASTDRIVE=Z
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DEPCA\DEPCA.DOS
device=c:\tp4\drivers\dli.dos
PROTOCOL.INI
------------
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[CLNS]
DRIVERNAME = CLNS$
NTC = 6
[PLUTO]
DRIVERNAME = PLUTO$
BINDINGS = "DEPCA_NIF"
NBUF = 4
NTC = 7
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "DEPCA_NIF"
LANABASE = 0
[DEPCA_NIF]
; PROTOCOL.INI section for the DEC EtherWORKS (MC, LC, Turbo, & DEPCA)
; Adapters
DriverName = DEPCA$
MaxMulticast = 12
MaxTransmits = 32
AdapterName = DE200
RamAddress = 0xD000
Interrupt = 5
; use Interrupt = 5 for turbo board
Additional query words:
======================================================================
Keywords :
Technology : kbMailSearch kbMailGateSearch kbZNotKeyword3 kbMailGatex400320
Version : MS-DOS:3.2
=============================================================================