Article: Q142907
Product(s): Microsoft Windows NT
Version(s): 3.50 3.51
Operating System(s):
Keyword(s):
Last Modified: 08-AUG-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Workstation versions 3.5, 3.51
- Microsoft Windows NT Server versions 3.5, 3.51
-------------------------------------------------------------------------------
SYMPTOMS
========
If you have multiple IBM Auto 16/4 token ring adapters installed on the computer
and the Auto Sense option is enabled on one or all of them, the IBM Auto 16/4
Token Ring driver in Windows NT does not load.
RESOLUTION
==========
To correct this problem, disable the Auto Sense option on the token ring
adapter. To perform this:
1. Insert the IBM Auto 16/4 token ring adapter on one of the available slots
inside the computer.
2. Boot to MS-DOS.
3. Insert the IBM Auto 16/4 Token-Ring Adapter Disk 1 (LANAID disk).
4. Run LANAID.EXE.
5. Select Configuration.
6. Press TAB to Auto Sense. Select Disabled using the arrow keys and press the
spacebar.
7. Press ALT+S to store the configuration. Make sure you note the configuration.
8. Press ALT+O to exit Configuration and quit Lanaid.
9. Shut down the computer and remove the token ring adapter from the slot inside
the computer.
10. Repeat steps 1 to 9 for the other IBM Auto 16/4 Token Ring adapters.
The third-party products discussed here are manufactured by vendors independent
of Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.
======================================================================
Keywords :
Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search
Version : 3.50 3.51
=============================================================================