Article: Q143114
Product(s): Microsoft SourceSafe
Version(s):
Operating System(s):
Keyword(s): kbSSafe400 kbSSafe500 kbSSafe600
Last Modified: 08-MAY-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Visual SourceSafe, 16-bit, for Windows, versions 4.0, 4.0a, 5.0
- Microsoft Visual SourceSafe, 32-bit, for Windows versions 4.0, 4.0a
- Microsoft Visual SourceSafe for Windows, version 5.0
-------------------------------------------------------------------------------
SYMPTOMS
========
An administrator may need to install Visual SourceSafe several times from the
same workstation. However Acme Setup might go into maintenance mode if this is
attempted.
CAUSE
=====
This behavior is required for Windows 95 compliant applications. For a file
server application, such as Visual SourceSafe, this may not provide the needed
functionality.
WORKAROUND
==========
If the administrator's computer is running Windows or Windows for Workgroups,
delete the Setup.stf file located in the Vss\Setup directory.
If the administrator's computer is running Windows 95 or Windows NT, use the
following method. This method requires changing the Registry. Please back up the
registry before attempting either of these.
WARNING: Using Registry Editor incorrectly can cause serious, system-wide
problems that may require you to reinstall Windows NT or Windows 95 to correct
them. Microsoft cannot guarantee that any problems resulting from the use of
Registry Editor can be solved. Use this tool at your own risk.
1. Run the Server Setup.
2. Go into the registry (REGEDIT in Windows 95 or REGEDT32 in Windows NT), and
find the entry for the following:
HKEY_LOCAL_MACHINE\Software\Microsoft\MS Setup (ACME)\Table Files
if you have Visual SourceSafe version 5.0, 4.0, or 4.0a.
Delete all the entries for SSEXP and SSADMIN.
-or-
Find the entry for the following:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\6.0\Setup\Microsoft Visual
SourceSafe\SetupWizard-1033-PRO
if you have Visual SourceSafe version 6.0.
Delete the key "WizardState".
NOTE: After this is done, you will not be able to go to select the Add/Remove
programs in the Control Panel for the server installation.
3. Run Visual SourceSafe setup from the CD to do the installation for a new
database. It will not go into maintenance mode.
4. Run Netsetup. It will not go into maintenance mode.
STATUS
======
This behavior is by design.
Additional query words:
======================================================================
Keywords : kbSSafe400 kbSSafe500 kbSSafe600
Technology : kbSSafeSearch kbAudDeveloper kbSSafe400 kbSSafe400a kbSSafe500 kbSSafe16bitSearch kbSSafe32bitSearch
Issue type : kbprb
Solution Type : kbfix
=============================================================================