Article: Q150553
Product(s): Microsoft Windows NT
Version(s): 3.50 3.51
Operating System(s):
Keyword(s):
Last Modified: 08-AUG-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Workstation versions 3.5, 3.51
- Microsoft Windows NT Server versions 3.5, 3.51
-------------------------------------------------------------------------------
SYMPTOMS
========
When you try to use the Media Vision Proaudio Spectrum 16 driver (Mvaudio.sys)
in conjunction with any of these Diamond Viper video cards:
Diamond Viper PCI
Diamond Viper PRO PCI
Diamond Viper PRO VLB
Diamond Viper VLB
Diamond Viper SE PCI
Diamond Viper SE VLB
you may receive a combination of the following event messages (the messages
received depends on which driver was loaded first):
Event id: 22
source: Weitekp9
type: error
Description: A conflict has been detected between two drivers which
claimed two overlapping Io port regions. Driver weitekp9, with device
<\Device\Video1.Translated>, claimed an IO port range with starting
address in data address 0x28 and 0x2c, and length in data address
0x30.
0000: 000c0000 005e0003 00000000 c0040016
0010: 00000000 00000000 00000000 00000000
0020: 00000000 00000000 0000f000 00000000
0030: 00000c04
Eventid: 22
source: Weitekp9
type: error
Description: A conflict has been detected between two drivers which
claimed two overlapping Io port regions. Driver mvaudio, with device
<\Device\PASWaveOut0.Translated>, claimed an IO port range with
starting address in data address 0x28 and 0x2c, and length in data
address 0x30.
0000: 000c0000 005e0003 00000000 c0040016
0010: 00000000 00000000 00000000 00000000
0020: 00000000 00000000 0000f388 00000000
0030: 00000004
Event id: 22
source: mvaudio
type: error
Description: The description for Event ID (22) in Source ( mvaudio )
could not be found. It contains the following insertion string(s): ,
weitekp9, \Device\Video0.Translated.
0000: 000c0000 005c0003 00000000 c0040016
0010: 00000000 00000000 00000000 00000000
0020: 00000000 00000000 0000f000 00000000
0030: 00001000
Event id: 22
source: mvaudio
type: error
Description: The description for Event ID (22) in Source ( mvaudio )
could not be found. It contains the following insertion string(s): ,
mvaudio, \Device\PASWaveOut0.Translated.
0000: 000c0000 005c0003 00000000 c0040016
0010: 00000000 00000000 00000000 00000000
0020: 00000000 00000000 0000f388 00000000
0030: 00000004
Event id: 7000
source: Service control manager
type: error
Description: The mvaudio service failed to start due to the following
error: The parameter is incorrect.
CAUSE
=====
All of the Diamond Viper video cards listed above use the Weitekp9 video chip
set. The Weitekp9.sys and the Mvaudio.sys drivers try to use overlapping I/O
resources.
RESOLUTION
==========
Replace the Weitekp9-based video card with another video card that is on the
Hardware Compatibility List (HCL) but doesn't use the Weitekp9 chip set.
STATUS
======
Microsoft has confirmed this to be a problem in Windows NT versions 3.5 and
3.51. We are researching this problem and will post new information here in the
Microsoft Knowledge Base as it becomes available.
======================================================================
Keywords :
Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search
Version : 3.50 3.51
=============================================================================