Q170287: Multi-session SLI Program Stops Receiving Data

Article: Q170287
Product(s): Microsoft SNA Server
Version(s): WINDOWS:2.11,3.0
Operating System(s): 
Keyword(s): kbnetwork kbprogramming
Last Modified: 13-JUN-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft SNA Server, versions 2.11, 3.0 
-------------------------------------------------------------------------------


SYMPTOMS
========

If an SLI program opens multiple sessions, the application may fail to receive
error notification on all sessions if a link failure occurs, causing the session
to stop responding. This problem was observed in the following scenario:

- A Win32-based SLI application (running on the SNA Server or a Windows NT
  client) opens 100 sessions, then calls SLI_RECEIVE on each session.

- A connection failure occurs, causing all 100 sessions to fail. However, the
  SLI application fails to receive any error notification on most of the
  sessions. All SLI_RECEIVEs should return with the following error message
  when the connection fails:

  

     primary_rc   = 0x000F     (LUA_SESSION_FAILURE)
     secondary_rc = 0x08310000 (LUA_LU_COMPONENT_DISCONNECTED)

The above scenario describes the common symptom for this problem. However, the
problem could appear whenever the SLI library receives status or data messages
on a large number of sessions at the same time.

CAUSE
=====

The SNA Server SLI interface is queuing messages to the RUI interface
incorrectly, which could cause outstanding SLI calls to fail to return to the
SLI application.

STATUS
======

Microsoft has confirmed this to be a problem in SNA Server versions 2.11 SP2 and
3.0 SP1.

This problem was corrected in the latest SNA Server version 3.0 U.S. Service
Pack. For information on obtaining this Service Pack, query on the following
word in the Microsoft Knowledge Base (without the spaces):

  S E R V P A C K


A supported fix is now available for 2.11 SP2, but has not been fully
regression-tested and should be applied only to systems experiencing this
specific problem. Unless you are severely impacted by this specific problem,
Microsoft recommends that you wait for the next Service Pack that contains this
fix. Contact Microsoft Technical Support for more information.



Additional query words:

======================================================================
Keywords          : kbnetwork kbprogramming 
Technology        : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ211
Version           : WINDOWS:2.11,3.0
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================