Article: Q188892
Product(s): Microsoft SNA Server
Version(s): WINDOWS:2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0
Operating System(s):
Keyword(s):
Last Modified: 19-SEP-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft SNA Server, versions 2.11, 2.11 SP1, 2.11 SP2, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0
-------------------------------------------------------------------------------
SUMMARY
=======
One of the more difficult tasks when you are attempting to find the root cause
of Event 23 "00AF" (link lost) or other network outage errors posted in
Application Event logs, is knowing when to stop a Netmon trace after a failure
has occurred. Frequently, because of high network traffic, the network incident
that spawned the Event 23 or other network outage has been overwritten by the
time network personnel have been notified to stop the Netmon trace.
You can use Evtscan.exe to send a pop-up message containing a predefined message
within seconds of an Event 23 error to any designated computer(s). The utility
can send a message for any event and within a configurable length of time after
the event transpires. In addition, a predefined e-mail message can be sent to
specific users notifying them to stop the Netmon capture. Because the e-mail
message is sent containing known specific strings, other actions can be taken on
receipt of that specific text string (for example, paging a particular pager
number, forwarding the message, and so forth).
Evtscan.exe is a utility that ships with the Back Office Resource Kit (Part 1)
(in the Exchange\Tools\Evtlog directory), and has also shipped with the May 1998
Tech Net CD, on a supplemental CD entitled "BackOffice Resource Kit Utilities,
Second Edition" (in the Exchange/Winnt/I386/Admin/Evtlog directory). Evtscan.exe
ships as an Exchange utility, but has been recently used in the SNA arena,
helping to report network outages (Event 23s) as soon as they are recorded in
the Event logs.
MORE INFORMATION
================
Frequently, when troubleshooting link lost and other intermittent LAN errors, it
becomes essential to capture network traces (using Netmon). As the outages are
intermittent, prompt identification and notification of the network outage will
enable support personnel to stop the network tracing device while the LAN error
is still in the trace buffer, and not overwritten.
The EVTSCAN utility can be used to track any event ID that is generated in the
event logs on specific computers running Windows NT Server. For the purposes of
this article, we will be using Event 23 as an example.
To use EVTSCAN, perform the following steps:
1. Copy the files Evtscan.exe and Evt.cfg to the Winnt\System32\Config directory
on the monitoring computer running Windows NT Server or Windows NT
Workstation.
The Evt.cfg file contains the instructions EVTSCAN will use when monitoring
the event logs. The format of the Evt.cfg file is:
Event ID; Source Service; Action to take; Screen pop up list; email list;
Message to be sent
The Evtscan utility will monitor the Application log for:
- An Event 23,
- Taking no action, (that is not stopping or restarting the service)
- Sending a screen pop-up message to the machine "SNA Monitor"
- Sending e-mail to the SNA-Admin alias
- With the following message " Event 23 has occurred- stop netmon trace
immediately"
The evt.cfg file would be modified to contain only the following string:
23; SNA Server; ; SNA Monitor; SNA-Admin; Event 23 has occurred- stop netmon
trace immediately
2. Ensure that the client is Mapi32-compliant so the mail message function works
correctly. The simplest way to ensure the mail message will be sent is to
install an Exchange client on the monitoring computer, then start Exchange,
and then minimize it.
3. Go to an MS-DOS command prompt and change directories to the
\Winnt\system32\config directory. Then start EVTSCAN by typing the following
commands:
evtscan -f <Evt.cfg (in this case)> -u <the Exchange profile to be
used(if necessary)> -p <password for the Exchange profile> -t
<how many seconds between scans> <Target server to be scanned #1>
<Target server to be scanned #2>, and so forth.
For example, if you have logged into the monitoring computer with your user
name and password and have started and minimized Exchange, use the following
command string:
"evtscan -f evt.cfg -t 15 SNAServer#1,SNAServer#2,SNAServer#3" (without the
quotation marks)
This will bring about the following results:
- Scanning SNAServer#1, SNAServer#2, and SNAServer#3
- Every 15 seconds
- For Event 23s
- We will send screen pop-up messages to SNA Monitor
- We will send e-mail to SNA-Admin
You can then minimize the MS-DOS window under which EVTSCAN is running.
4. After notifications have been sent, and there is no further need to run
EVTSCAN, you can exit EVTSCAN by typing the following command:
"^C (Ctrl+C)" (without the quotation marks)
For more information, please see the following Microsoft Knowledge Base
articles:
Q155886 How to Make a Network Trace With Network Monitor
Q158744 How to Automate Network Captures With Network Monitor
Q148942 How to Capture Network Traffic With Network Monitor
Additional query words:
======================================================================
Keywords :
Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ211 kbSNAServ400 kbSNAServ211SP1 kbSNAServ211SP2 kbSNAServ300SP3 kbSNAServ300SP1 kbSNAServ300SP2
Version : WINDOWS:2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0
Issue type : kbhowto kbinfo
=============================================================================