Article: Q216231
Product(s): Microsoft Visual Basic for Windows
Version(s): 6.0
Operating System(s):
Keyword(s): kbwizard kbtophit kbAppSetup kbVBp600bug kbOSWin95 kbOSWin98 kbGrpDSVB kbOSWinME
Last Modified: 04-JAN-2002
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Visual Basic Learning Edition for Windows, version 6.0
- Microsoft Visual Basic Professional Edition for Windows, version 6.0
- Microsoft Visual Basic Enterprise Edition for Windows, version 6.0
-------------------------------------------------------------------------------
SYMPTOMS
========
When you run a Setup that was created using the Package and Deployment Wizard
(PDW), you receive one of the following error messages:
Cannot start main setup program! (CreateProcess() returned error code
0x000000C1H)
VB6stkit.dll is not a valid Windows NT image
The system could not locate the file '<Temp
Folder>\Msftqws.pdw\Vb6stkit.dll'. Would you like to browse for the file
yourself?
The system could not locate the file '<Temp
Folder>\Windows\Temp\Msftqws.pdw\St6unst.exe'. Would you like to browse
for the file yourself?
where <Temp Folder> is the Windows\Temp folder on Windows 95, Windows 98,
or Windows Me or the folder specified by the TEMP environment variable on
Windows NT.
CAUSE
=====
If the symptom occurs on all target computers where you run Setup, the cause of
the problem is most likely one of the following:
- A damaged diskette.
- A damaged setup file.
If the symptom only occurs on some target computers, the cause may be one of the
following:
- Left-over files from a previous installation attempt.
- A machine-specific issue.
RESOLUTION
==========
Test for Damaged Diskette
-------------------------
Try deploying the Setup package to a different set of diskettes, or use a disk
scanning utility, such as ScanDisk, to verify the integrity of the current set
of diskettes.
NOTE: When using ScanDisk, select the Thorough option. The Standard option does
not detect all disk errors.
Test for Damaged Files
----------------------
1. Create a test folder on the hard drive of the target computer.
2. Copy the files from the Setup diskettes to the test folder:
a. If you receive error messages indicating the copy failed, the diskette may
be damaged (see the "Test for Damaged Diskettes" section of this article),
or there may be a problem with the floppy disk drive.
b. If the copy succeeds, continue with the next step.
3. Run Setup.exe from the test folder on the hard drive.
a. If the Setup succeeds when run from the hard drive, this indicates one of
the diskettes may be damaged (see the "Test for Damaged Diskettes" section
of this article), or there may be a problem with the floppy disk drive.
b. If the Setup fails with one of the error messages listed in the "Symptoms"
section of this article, continue with the next step
4. If the Setup succeeds when run from the hard drive, this indicates one of the
diskettes may be damaged (see the "Test for Damaged Diskettes" section of
this article), or there may be a problem with the floppy disk drive.
5. If the Setup fails with one of the error messages listed in the SYMPTOMS
article, continue with the next step.
6. To determine whether a .cab file is corrupt, manually extract the files from
the .cab file(s). To extract the contents of a cabinet file, you must use the
Extract utility.
Extract.exe can be found in your Windows or Winnt folder or on your Windows
95, Windows 98, Windows NT, or Windows 2000 installation CD or diskettes.
Extract.exe is a command-line utility. Therefore, it is used from an MS-DOS
command prompt. To extract the files within a cabinet file, be sure the
Extract.exe utility is in the MS-DOS path, or copy the Extract utility to the
same folder as the cabinet file.
From the MS-DOS command prompt, you can run the following command to extract
all of the files in a .cab file into the current directory:
extract.exe /e /a <File Name>.cab
where <File Name> is the name of your cabinet file. If there are
multiple .cab files in the setup, <File Name> should be the first .cab
in the series. If all the files extract successfully, the .cab file is not
corrupted. However, the .cab file is corrupted if you receive the following
error message:
ERROR: Cabinet file <File Name>.cab is corrupted
where <File Name> is the name of the .cab file you just extracted.
NOTE: In some cases, a .cab file may be damaged even though you are able to
successfully extract the files from it. Try re-running the PDW or running the
.bat file in the \Support folder to recreate the .cab file(s). After
recreating the cabinet file(s), verify that they are not corrupt by manually
extracting the files again, and then retrying the installation.
For additional information about rebuilding cabinet files by running a .bat
file, please see the following article in the Microsoft Knowledge Base:
Q191212 HOWTO: Modify and Rebuild .CAB Files Built with PDW
For more information on using the Extract.exe utility, you can type the
following command at an MS-DOS command prompt:
extract.exe /?
For even more information on Extract.exe, please see the ActiveX SDK
documentation as referred to in the REFERENCES section of this article.
Test for Setup Files Left on System
-----------------------------------
If the symptom occurred after a previous installation attempt of the same
application failed (for example, the computer stopped responding during setup),
follow these steps:
1. On the target computer, search for a copy of your application's .cab file(s)
in the Windows folder (or Winnt folder on NT or Windows 2000). If found,
delete the .cab file(s).
Setup places the .cab file(s) in the Windows or Winnt folder and removes them
at the end of a successful Setup. However, if the installation program exits
abnormally, the .cab files may be left on the system.
2. In the Windows\Temp folder (or the folder specified by the TEMP environment
variable on NT or Windows 2000), look for a subfolder named Msftqws.pdw. If
found, delete the subfolder.
3. On the target computer, locate the following files. If any of these files
have a size of 0 bytes, delete the file:
\Windows\System\Vb6stkit.dll (or \Winnt\System32\Vb6stkit.dll)
\Windows\St6unst.exe (or \Winnt\St6unst.exe)
4. Run Setup again.
Machine-Specific Problem
------------------------
If the troubleshooting suggestions in this article do not resolve the problem,
there may be something specific about the configuration of the target computer
that is causing the error.
Please contact Microsoft Technical Support for further assistance.
STATUS
======
Microsoft has confirmed this to be a bug in the Microsoft products listed at the
beginning of this article.
This bug was corrected in Visual Studio 6.0 Service Pack 3.
For more information about Visual Studio service packs, please see the following
articles in the Microsoft Knowledge Base:
Q194022 INFO: Visual Studio 6.0 Service Packs, What, Where, Why
Q194295 HOWTO: Tell That Visual Studio 6.0 Service Packs Are Installed
REFERENCES
==========
For more information about using Extract.exe, please see the documentation found
in the ActiveX Software Development Kit (SDK). The ActiveX SDK is available for
download from the following location:
http://www.microsoft.c om/workshop/misc/activexsdk/default.asp
Additional query words: find reboot kbfix
======================================================================
Keywords : kbwizard kbtophit kbAppSetup kbVBp600bug kbOSWin95 kbOSWin98 kbGrpDSVB kbOSWinME
Technology : kbVBSearch kbAudDeveloper kbZNotKeyword6 kbZNotKeyword2 kbVB600Search kbVB600
Version : :6.0
Issue type : kbbug
Solution Type : kbfix
=============================================================================