Article: Q231232
Product(s): Microsoft Systems Management Server
Version(s): 2.0
Operating System(s):
Keyword(s): kbnetwork kbClient kbConfig kbServer kbsms200 kbCAP kbDiscovery
Last Modified: 08-DEC-2000
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Systems Management Server version 2.0
-------------------------------------------------------------------------------
SUMMARY
=======
In large network environments where computers are shut off each day, network
performance issues may be observed when the computers are turned on each
morning, even when logon scripts are not used. This behavior can be caused by
the Client Configuration Installation Manager (CCIM) on several different
computers going though a maintenance cycle at the same time.
The CCIM is a Systems Management Server (SMS) client component that is
responsible for ensuring that each client is correctly installed and assigned to
the correct site. Another benefit of the CCIM cycle is that changes to the
Client Agents performed in the SMS Administrator Console are automatically
propagated to the clients during the cycle. The CCIM also keeps the client data
and the SMS site server data synchronized by creating discovery data records and
determines which optional components should be installed.
During the CCIM cycle, there is usually nothing copied between the Client Access
Point (CAP) and the client, except when the Client Agents have changed or when a
discovery record (heartbeat discovery) needs to be sent to the site server
through the CAP.
MORE INFORMATION
================
Initially, the CCIM cycle is set to occur every 23 hours, starting with when the
client software was installed. However, if a computer misses the CCIM cycle
because it is turned off, the CCIM runs at power-up (for Microsoft Windows NT
and Windows 2000 computers) or logon (for Windows 95 and Windows 98 computers),
regardless of the 23-hour cycle. The 23-hour cycle is then computed from the
power-up or logon time, unless the computer or the SMS Client Service is
restarted during the day. Changing the CCIM interval does not alter this
behavior.
For a user who logs on at 8:00 A.M. each morning, the CCIM interval is set to
7:00 A.M. the next day (23 hours later). If the computer is not powered-up
(Windows NT and Windows 2000 computers), or the user is not logged on (Windows
95 and Windows 98 computers) at 7:00 A.M. the next day, CCIM wakes up only when
the user powers-up or logs on at 8:00 A.M.
If several computers are powered up each morning at approximately the same time,
the network traffic generated by each computer, although minimal, may be
compounded so that there is a noticeable effect on the network.
On large sites and for scalability reasons, it is recommended that you lock your
workstation rather than logging off or shutting down; doing so helps minimize
network traffic.
Additional query words: prodsms
======================================================================
Keywords : kbnetwork kbClient kbConfig kbServer kbsms200 kbCAP kbDiscovery
Technology : kbSMSSearch kbSMS200
Version : :2.0
Issue type : kbinfo
Solution Type : kbnofix
=============================================================================