Make sure that the AC adapter is plugged in and that the main battery
is installed properly.
Turn on the computer. The following error message appears:
System hardware failures: #0010
Strike the F1 key to shutdown
Instead of pressing <F1>, insert the Flash BIOS update floppy disk or
CD into the appropriate drive and press <F6>, and then press <F4>.
The computer displays the following message on the screen:
Failure override
Processor update failure. Reload current BIOS
Strike the F1 key to continue, F2 to run the setup
utility.
Press <F1>. The computer continues to boot and updates the new
BIOS.
Press <F2> to enter the system setup program and reset the boot
sequence with the appropriate drive, if required.
Press <ESC> to exit the system setup program.
Remove the Flash BIOS update floppy disk or CD from the drive and
restart the computer.