AOpen driver team 出的一個 user friendly 的 patch 不限制只能用AOpen mainboard, 任何 TX 板子皆可 AOpen TX Utility Readme Version 1.0 (May 9, 1997) ================================================= Before installation, please make sure that you have read all of following installation notice. 1) Introduction: Intel has introduced 430TX chipset with latest feature of "ACPI", "USB" & "Ultra DMA/33". Since these devices are so new that Win'95 did not anticipate to support them on Aug. of '95 which Win'95 initially is being released. Under Win'95 Device Manager, you may see following devices installed: -Other Devices ? PCI Bridge ? PCI Card (or PCI Universal Serial Devices) -Hard Disk Controllers Standard Dual PCI IDE Controller Primary IDE Controller Secondary IDE Controller Although your system will still work fine with this "?" exist. We received many requests about how to eliminate it. AOpen driver team spends few weeks to develop this utility for convenience of Win95 users. It is very user friendly and can be used on any TX mainbaord, not limited to AOpen AP5T/AX5T. You are welcome to distribute it, simply say thanks to our driver team. 2) Before installation: Please determine the version of Windows '95 on your system by following steps, 1. Double click "System" in "Control Panel". 2. Click "General". 3. Look for "System" heading & refer to following, 4.00.950 Windows 95 4.00.950A Windows 95 + Service Pack or OEM Service Release 1 4.00.950B OEM Service Release 2 or OEM Service Release 2.1 If you are running OSR 2.1, you may tell it from by checking "USB Supplement to OSR2" in the list of installed program of Add/Remove program tool under Control Panel, and checking for version 4.03.1212 of the Ntkern.vxd file in the Windows\System\Vmm32 folder. 3) Installation Procedure A. If you are Windows 95 (950/950A) User 1. Start system & execute TX.EXE under Windows'95. 2. TX utility will identify your Windows'95 version. Please select & click the icon which applies to your system by following the instruction "Your O.S. system is:<>". 3. Automatically reboot. 4. Windows 95 will recognize the presence of the Intel 82439TX & 82371AB controller during Windows 95 start up. 5. When Windows 95 prompt & ask for the driver of "Intel 82371AB PCI Bus Master IDE Controller", please select "Windows default driver" by pressing "OK". 6. Select "Yes" for rebooting. 7. After complete start up, the following devices will be created & recognized under Device Manager: -Other Devices ? PCI Card -Hard Disk Controllers Intel 82371AB PCI Bus Master IDE Controller Primary IDE Controller Secondary IDE Controller -System Devices Intel 82371AB PCI to ISA Bridge Intel 82371AB Power Management Controller Intel 82439TX Pentium(r) Processor to PCI Bridge Note: PCI Card stands for the presence of the Universal Serial Controller. There is no direct upgrade path available from Microsoft at this moment. USB is formally supported by Windows'95 OSR 2.1 or expected to be implemented within Windows'97(Memphis). B. If you are Windows 95 OSR 2.0 or OSR 2.1 (950B) User If you are Win'95 OSR 2.0 user, you may upgrade it to OSR 2.1 by obtaining "USBSUPP.EXE" from Microsoft or your OEM system provider for installing Microsoft USB supplement which will create "USB Supplement to OSR2" in the list of Add/Remove program tool under Control Panel. 1. Start system & execute TX.EXE under Windows'95. 2. TX utility will identify your Windows'95 version. Please select & click the icon which applies to your system by following the instruction "Your O.S. system is:<>". 3. Automatically reboot. 4. Windows 95 will recognize the presence of the Intel 82439TX & 82371AB controller during Windows 95 start up. 5. When Windows 95 prompt & ask for the driver of "Intel 82371AB PCI Bus Master IDE Controller", please press "Next" icon. 6. Windows 95 will locate default driver automatically & select "Finish" to install. 7. Select "Yes" for rebooting. 8. After complete start up, the following devices will be created & recognized under Device Manager if you are OSR 2.0 user: -Other Devices ? PCI Universal Serial Devices -Hard Disk Controllers Intel 82371AB PCI Bus Master IDE Controller Primary IDE Controller Secondary IDE Controller -System Devices Intel 82371AB PCI to ISA Bridge Intel 82371AB Power Management Controller Intel 82439TX Pentium(r) Processor to PCI Bridge 9. If you are OSR 2.1 user, it will be: -Universal Serial Bus Controller Intel 824371AB PCI to USB Universal Host Controller USB Root Hub -Hard Disk Controllers Intel 82371AB PCI Bus Master IDE Controller Primary IDE Controller Secondary IDE Controller -System Devices Intel 82371AB PCI to ISA Bridge Intel 82371AB Power Management Controller Intel 82439TX Pentium(r) Processor to PCI Bridge 4) Bus Master/Ultra DMA 33 Driver Bus Master/Ultra DMA 33 driver for Windows '95 is available from AOpen homepage also. Please download the driver & install it for maximum performance under Windows'95. After installation, you will see following under Device Manager: -Hard Disk Controllers Intel 82371AB PCI Bus Master IDE Controller Primary Bus Master IDE Controller Secondary Bus Master IDE Controller Copyright 1997. - Advanced Information Inc. All rights reserved.