*****************************************************************************

*                                                                           *

*                  PCI 10/100Mb Fast Ethernet Adapter                       *

*                                                                           *

*                       NDIS Driver for LANTASTIC                           *

*                                                                           *

*                                                                           *

*****************************************************************************



Introduction:

=============



  This document shows you how to install Lantastic NDIS driver

  and how to use the enhanced functions by setting the custom keywords.





Contents of the Subdirectory:

=============================



    LANTASTI.TXT        This file.

    FETND.DOS           The NDIS2 driver.

    PROTOCOL.INI        Sample protocol.ini file.







Installation:

=============



  Before starting with the installation process, make sure that the adapter

  is properly installed and configured. You can use the diagnostic program

  (A:\SETUP.EXE) to make sure your connection with the network is correct.



  Install procedure for Lantastic 6.0

  -----------------------------------



    1) Run Lantastic 6.0 install program and follow screen instructions.



    2) When the "Network Adapter Setup" appears, Select "Use NDIS driver for

       non-Artisoft adapter" and type "A:\LANTASTI" in the search path and

       select "Search" button.



    3) When the install program find FETND NDIS driver, select "OK" to continue.



    4) Follow the screen instructions to complete the installation.



    5) Restart the computer.



  Manual install for Lantastic 6.0/5.0

  ------------------------------------



    You can replace the NDIS driver by modify the following configuration files:



        Sample CONFIG.SYS

        -----------------



        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI

        DEVICE=C:\LANTASTI\FETND.DOS





        Sample STARTNET.BAT

        -------------------



        C:\LANTASTI\AI-NDIS BIND_TO=FETND_NIF

        C:\LANTASTI\AILANBIO





        Sample PROTOCOL.INI

        -------------------



        [PROTMAN]

           DRIVERNAME = PROTMAN$

           DYNAMIC = YES



        [FETND_NIF]

           DRIVERNAME = FETND$





Configuration Files:

====================



    You can change the configuration by modify PROTOCOL.INI file.



    File Name:          PROTOCOL.INI

    ----------

    Sample of configuration file:

    -----------------------------



        ...

        [FETND_NIF]

        DRIVERNAME=FETND$

      

        ...





    Custom Keywords:

    ----------------

        FULLDUPLEX                      This keyword is used to enable full

                                        duplex mode.



        SPEED                           This keyword is used to force the

                                        adapter at 10Mbps or 100Mbps speed.



        AUTO                            This keyword is used to force the

                                        chip at Auto-Negotiation mode.