*****************************************************************************

*                                                                           *

*                  VIA PCI 10/100Mb Fast Ethernet Adapter                   *

*                                                                           *

*                      NDIS5 Driver for Windows ME                          *

*                                                                           *

*                           v2.61   Oct. 2000                               *

*                                                                           *

*****************************************************************************



Introduction:

=============



  This document shows you how to setup the driver and how to use the enhanced

  functions by setting the custom keywords.





Contents of the Subdirectory:

=============================



    FETND5A.SYS         The NDIS5 driver for Windows ME.

    FETND5.INF          The installation information file.

    WINME.TXT           This file.





Installation:

=============



  Before starting with the installation process, make sure that the adapter

  is properly installed and configured. You can use the diagnostic program

  (A:\SETUP.EXE) in DOS mode to make sure your connection with the network is

  correct.



    1. Turn the power of your PC on to boot from Windows ME. Windows ME may

       auto-detect your new adapter installed, and the "New Hardware Found"

       dialogue box will appear. Select "Driver from disk provided by hardware

       manufacturer" to install driver from the diskette that come with your

       lan adapter.



       Note: If your new adapter is not detected by Windows ME, you can open

       "My Computer" -> "Control Panel" -> "Networks" after Windows ME comes up,

       and select "Add adapter" -> "Have disk" to install driver from the

       diskette that come with your lan adapter.



    2. Insert the driver diskette into your floppy drive, and specify the

       path of the driver in the diskette(i.e. A:\WME) to copy the driver

       files to your system.



    3. When the driver installation is completed, restart Windows ME.