Cybrary: Deskpro M - Configuring System board

Deskpro M

Configuring System Board


The Deskpro 386/M and 486/M processor boards are upgradable to faster 486 and Pentium versions via the Processor Board Upgrade Kits. There are no microprocessor chip upgrades. The board upgrades come with the processor board, the latest version of EISA Configuration, and a system ROM. The upgrades are only available as a service part and pricing assumes return within 30 days of original processor board.
 
NOTE: There are no switch or jumper settings to set for the Pentium Boards

486SX/16 Processor Board Switch Settings (002313/002300)

 
Switch Setting Function
S1 OFF * Reserved
S2  OFF * 487SX coprocessor not installed
ON  487SX coprocessor installed
S3 OFF *  487SX coprocessor not installed
ON 487SX coprocessor installed
* Default

486SX/25 Processor Board Switch Settings (002316/002302)

 
Switch Setting Function
S1 OFF * Reserved
S2  OFF * 487SX coprocessor not installed
ON  487SX coprocessor installed
S3 OFF *  487SX coprocessor not installed
ON 487SX coprocessor installed
* Default

486SX/25 and 486/33 Processor Board Switch Settings (002825/002502/003197/003107/003200)

 
Switch 486SX 487SX ODP 486DX ODPR
1 OFF OFF ON
2 OFF ON OFF
3 OFF ON ON
4 (25 MHZ)* ON ON ON
4 (33 MHZ)* OFF OFF OFF
* Ignore if processor board has a 3-position switch.

486/33 Processor Board Switch Settings (002319/002297)

 
Switch Setting Function
S1 ON * Reserved
S2 OFF * Reserved
S3 ON * Reserved
* Default

486/66 Processor Board Switch Settings (002431/002972-002)

 
Switch 486DX/DX2  P23T/P24T
1 ON OFF
2 OFF ON
3 ON* ON
* Default
Top of page

This page was updated on June 02, 2002
Comments about this page
Privacy and Legal Statement