Microstar MS 5106 (v1.1)
____________________________ CTBIOS ANALISYS __________________________________
Bios id : 07/21/94-MERCURY-ZB-2A59BM41-00
BIOS-Info, c't/Andreas Stiller, V. 1.3 5/99
Computer ID : FC, SubTyp: 01, BIOS-Level: 0
Rechnertyp : AT-3, Konfigurationsbyte $74
Maus laut BIOS : nicht PS/2-Typ
Maustreiber : nicht gefunden
Bus : ISA/PCI
Hauptspeicher : 640 KB, davon verfügbar : 636 KB
Extended Memory : 15360 KB
BIOS Date : 07/21/94
PCI-BIOS gefunden : Version 02.00
Konfigurations-Mech. : 2
Special-Cycle-Mech. : 0
PCI-Busse : 1
32-Bit-PCI-BIOS : Revision:0
Award BIOS found : Award Modular BIOS v4.50G
Award ID-String : 07/21/94-MERCURY-ZB-2A59BM41-00
Board/BIOS-Version : WM72 080594
VALUATION ROM - NOT FOR SALE
OEM : MICRO STAR
URL : http://www.msi.com.tw
Chipset : MERCURY-ZB //Intel Mercury-ZB
INT-13h BIOS Extension: nein
____________________________________ Direct Analisys ________________________________________
Manufacturer : MICROSTAR
Model : MS 5106 ver. 1.1
Subversions : N/A
Chipset : Intel Mercury-ZB
Cpu : N/A
Cpu Voltage : 3.52 V
Bus Clock : 60, 66 MHz
Multipliers : 1.5x
Socket : 7
Cache : 256/512 KB
Bios : Award Modular BIOS v4.50G
Memory : N/A
Dimm : 0
Simm : 4
Pci : 3
Isa : 4
Agp : 0
PS/2 : no
Irda : no
I/O : N/A
Format : N/A
Power : AT
Flash eprom : present (?)
Manual : no manual
____________________________________________________________________________________________
MSI Technology - Jumper Setting Handbook
MS-5106
CPU Freq. bus Setting
- 60 MHz: JK1 short, JK2 and JK3 open for 90 MHz CPU
- 66 MHz: JK1 and JK2 short, JK3 open for 100 MHz CPU
CPU Multiplier Setting
- This Mainboard supports only 1.5x Multiplier, therefore no
setting.
CPU Voltage Setting
- This Mainboard supports only 3.52V, therfore no setting.
Cache Size Setting:
- No cache: JS1 1-2, JS2 1-2
- 256k : JS1 1-2, JS2 2-3 32k*8 20ns
- 512k : JS1 2-3, JS2 2-3 64k*8 20ns
PCI IDE IRQ Setting
- Primary IDE: IRQ 14 Edge+ trigered : JP1 1-2
- Primary IDE: IRQ 14 Edge- trigered : JP1 2-3
- Secondary IDE: IRQ 15 Edge+ triggered: JP2 1-2
- Secondary IDE: IRQ 15 Edge- triggered: JP2 2-3
Setting for PCI-slot 1
- MS-3805 SCSI card setup : JP6 1-2
- All the other PCI card setup : JP6 2-3
CMOS Reset
- Short the jumper JP9 for CMOS reset, while the pc power is off
CPU-Fun Connector JFAN:
- Pin 1 +12V
- Pin 2 GND
- Pin 3 GND
_________________________________________________________________________________________
18/8/2000 translated from german by A.C.
acc@hop.to