Jumper Settings for 5DTX-TC/JY

ZIDA

MANUAIS DE MOTHERBOARDS ZIDA

Jumper Settings for 5DTX-TC/JY

5DTX-TC/JY provides two modes for Jumper Settings: (1) Auto Jumper Mode; (2) Manual mode.
Auto Jumper Mode
An advanced technology eliminates the necessity for the user to be bored by jumper settings on the mainboard.
It is capable of detecting the CPU brand, and setting the appropriate CPU core voltage and speed according
to instructions from the user through CMOS setup menu.
To enable Auto Jumper Mode, short JP37 to position (1-2).
Manual Mode
To enable Manual Mode, short JP37 to position (2-3) and follow the jumper table
below for necessary jumper settings for CPU installed.

FOR INTEL PENTIUM CPU

Internal CPU Speed (MHz) External Bus Speed (MHz) JP5 JP6 Frequency Ratio JP10 JP19
90 60 [3-5],[2-4] [1-2] 1.5x [1-3],[2-4] [1-2]
100 66 [1-3],[2-4] [1-2] 1.5x [1-3],[2-4] [1-2]
120 60 [3-5],[2-4] [1-2] 2x [1-3],[4-6] [1-2]
133 66 [1-3],[2-4] [1-2] 2x [1-3],[4-6] [1-2]
150 60 [3-5],[2-4] [1-2] 2.5x [3-5],[4-6] [1-2]
166 66 [1-3],[2-4] [1-2] 2.5x [3-5],[4-6] [1-2]
200 66 [1-3],[2-4] [1-2] 3x [3-5],[2-4] [1-2]
233 66 [1-3],[2-4] [1-2] 3.5x [1-3],[2-4] [1-2]

FOR CYRIX/IBM 6X86 CPU

Internal CPU Speed (MHz) External Bus Speed (MHz) JP5 JP6 Frequency Ratio JP10 JP19
PR133 55 [3-5],[4-6] [1-2] 2x [1-3],[4-6] [1-2]
PR166 66 [1-3],[2-4] [1-2] 2x [1-3],[4-6] [1-2]
PR200 75 [1-3],[4-6] [1-2] 2x [1-3],[4-6] [1-2]
PR233 66 [1-3],[2-4] [1-2] 3x [3-5],[2-4] [1-2]
PR233 75 [1-3],[4-6] [1-2] 2.5x [3-5],[4-6] [1-2]

FOR AMD-K5 CPU

Internal CPU Speed (MHz) External Bus Speed (MHz) JP5 JP6 Frequency Ratio JP10 JP19
PR90 60 [3-5],[2-4] [1-2] 1.5x [1-3],[2-4] [1-2]
PR100 66 [1-3],[2-4] [1-2] 1.5x [1-3],[2-4] [1-2]
PR133 66 [1-3],[2-4] [1-2] 1.5x [1-3],[2-4] [1-2]
PR150 60 [3-5],[2-4] [1-2] 1.75x [3-5],[4-6] [1-2]
PR166 66 [1-3],[2-4] [1-2] 1.75x [3-5],[4-6] [1-2]

FOR AMD-K6 CPU

Internal CPU Speed (MHz) External Bus Speed (MHz) JP5 JP6 Frequency Ratio JP10 JP19
PR166 66 [1-3],[2-4] [1-2] 2.5x [3-5],[4-6] [1-2]
PR200 66 [1-3],[2-4] [1-2] 3x [3-5],[2-4] [1-2]
PR233 66 [1-3],[2-4] [1-2] 3.5x [1-3],[2-4] [1-2]
PR266 66 [1-3],[2-4] [1-2] 4x [1-3],[4-6] [2-3]
PR300 66 [1-3],[2-4] [1-2] 4.5x [3-5],[4-6] [2-3]

CPU Voltage Selection

CPU Type Voltage Requirements
Intel Pentium
Cyrix/IBM 6x86
AMD K5		 3.4V(STD) / 3.5V(VRE)
Intel Pentium with MMX
Cyrix/IBM 6x86L		 2.8V
Cryix/IBM 6x86MX
AMD-K6-PR166, PR200		 2.9V
AMD-K6-PR233 3.2V
AMD-K6-PR266, PR300 2.2V
JP23 JP22 JP36 Voltage
[1-3],[4-6] [1-3],[2-4] [1-2] 2.2V
[1-3],[2-4] [1-3],[4-6] [1-2] 2.8V
[3-5],[2-4] [1-3],[4-6] [1-2] 2.9V
[1-3],[2-4] [3-5],[4-6] [1-2] 3.2V
[1-3],[4-6] [3-5],[4-6] [1-2] 3.4V
[3-5],[4-6] [3-5],[4-6] [1-2] 3.5V