Jumper Settings for 5DVA
CPU Type Selection
| CPU Type | JC1 | JC2 | JP6 | Bus Frequency MHz |
|---|---|---|---|---|
| PENTIUM 75 | 2-3 | 2-3 | OPEN | 50 |
| PENTIUM 90 | 2-3 | 1-2 | OPEN | 60 |
| PENTIUM 100 | 1-2 | 2-3 | OPEN | 66 |
| PENTIUM 120 | 2-3 | 1-2 | 3-4 | 60 |
| PENTIUM 133 | 1-2 | 2-3 | 3-4 | 66 |
| PENTIUM 150 | 2-3 | 1-2 | 1-2,3-4 | 60 |
| PENTIUM 166 | 1-2 | 2-3 | 1-2,3-4 | 66 |
| PENTIUM 180 | 2-3 | 1-2 | 1-2 | 60 |
| PENTIUM 200 | 1-2 | 2-3 | 1-2 | 66 |
| CYRIX/IBM PR120 | 2-3 | 2-3 | 3-4 | 50 |
| CYRIX/IBM PR133 | 1-2 | 1-2 | 3-4 | 55 |
| CYRIX/IBM PR150 | 2-3 | 1-2 | 3-4 | 60 |
| CYRIX/IBM PR166 | 1-2 | 2-3 | 3-4 | 66 |
| AMD-K5-PR75 | 2-3 | 2-3 | OPEN | 50 |
| AMD-K5-PR90 | 2-3 | 1-2 | OPEN | 60 |
| AMD-K5-PR100 | 1-2 | 2-3 | OPEN | 66 |
| AMD-K5-PR120 | 2-3 | 1-2 | OPEN | 60 |
| AMD-K5-PR133 | 1-2 | 2-3 | OPEN | 66 |
| AMD-K5-PR150 | 2-3 | 1-2 | 3-4 | 60 |
CPU Voltage Selection
| CPU Required Voltage | JX2 |
|---|---|
| 3.3V | 1-2 |
| 3.5V | 3-4 |
CMOS Discharge
| Description | JP5 |
|---|---|
| Normal | 1-2 |
| Discharge | 2-3 |
PCI Reset Control
| Description | JP1 |
|---|---|
| Normal PCI Card | 1-2 |
| ISA Reset PCI Card | 2-3 |
The following jumpers are for functional testing. Normally you do not need to change these settings.
JCK1=2-3, JP3=2-3, JP4=1-2
Copyright(c) 1997 Zida Technologies Limited. All Rights Reserved.
Last Updated on 3 Oct 97 HKT 15:30
Legal Notice